Availability
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$729.17
On Sale
AFR 195cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one piece 8mm 21 4N stainless steel valves. The AFR 195cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.
( 10 )
$434.70
—
$789.60
$412.96
—
$750.12
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$664.65
—
$1,023.75
$631.42
—
$972.56
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 159 )
$701.50
—
$2,629.50
$631.35
—
$2,366.55
On Sale
AFR 265cc Oval Port Magnum BBC cylinder heads are designed to be used on engine displacement up to 468 cu. in. operating at or below 6,200 rpm—providing tons of bottom-end torque, tremendous throttle response, and great all-around power. Recommended for street, strip, or towing applications, these torque monsters can flow 354 cfm at 0.650 in. lift. These units feature a 3/4 in. thick deck, along with reinforced rocker stud bosses, and thick, rugged castings. Want high-flowing power? Then choose these 265cc Oval Port Magnum BBC cylinder heads from AFR. Additional features include: * Intake runners and exhaust ports are partially CNC-machined * Competition 5-angle valve job * 3/8 in. guideplates * A356 aluminum material
( 9 )
$2,484.30
—
$3,214.05
$2,360.08
—
$3,053.35
On Sale
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$562.80
—
$780.15
$534.66
—
$741.14
On Sale
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 3 )
$3,011.40
—
$3,490.20
$2,860.83
—
$3,315.69
On Sale
AFR 227cc SBC Eliminator Race Ready Racing heads offer outstanding track performance at a competitive price. Exhaust and intake ports and combustion chambers are 100 percent CNC-ported, with coarser machine levels for terrific flow characteristics and big power gains. The 227cc SBC Eliminator heads feature a 3/4 in. thick head deck, ideal for nitrous or blower applications. They come complete and ready-to-run with quality AFR-proven components for maximum reliability—or choose "bare" heads (no parts) to design your own ultimate power package. These cylinder heads are available in standard and spread port exhausts. AFR 227cc SBC Eliminator Race Ready racing heads are a great choice for budget-minded racers.
( 9 )
$2,259.60
—
$2,770.95
$2,146.62
—
$2,632.40
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 40 )
$1,059.50
—
$1,933.50
$953.55
—
$1,740.15
On Sale
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 125 )
$649.99
$599.99
On Sale
AFR 195cc SBC Eliminator Street Heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. AFR 195cc heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect street heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your vehicle and engine.
( 40 )
$1,164.45
—
$2,328.90
$1,106.23
—
$2,212.46
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,332.95
—
$2,308.95
$1,199.66
—
$2,078.06
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$599.99
On Sale
If you need the world's finest high performance street/strip small block Ford heads, then check out AFR's 185cc emissions-legal Renegade Street cylinder heads (CARB E.O. #250-3). With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, AFR's 185cc Ford cylinder heads are designed for 302-351 c.i.d. engines operating from 1,500 to 6,500 rpm. A 3/4 in. thick head deck makes the AFR heads ideal for nitrous or blower applications. These heads will not accept rail rocker arms, and hardened push rods are required on models designed for stud mount rocker arms.
( 37 )
$2,049.60
—
$2,328.90
$1,947.12
—
$2,212.46
On Sale
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 151 )
$102.95
—
$215.95
$92.66
—
$194.36
On Sale
Race-ready AFR 220cc SBC Eliminator racing heads feature 100 percent CNC-ported intakes with greater detail. They also come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. They also offer exceptional flow characteristics, a 23 degree valve angle, and standard valve spacing. These cylinder heads are perfect for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts).
( 22 )
$2,259.60
—
$3,423.00
$2,146.62
—
$3,251.85
On Sale
These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.
( 10 )
$1,214.50
—
$1,251.50
$1,093.05
—
$1,126.35
On Sale
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,586.80
—
$1,736.79
$1,515.21
—
$1,665.20
On Sale
If you're looking for the world's finest street/strip heads available, then AFR's 205cc Renegade Race cylinder heads are your answer. With lightweight 8mm 2.080 in. intake and 1.600 in. exhaust valves, these heads move tremendous volumes of air through conservative runner volumes, spelling big torque and horsepower numbers. AFR's trademark 3/4 in. thick head deck makes them ideal for heavy nitrous or blower applications. They even offer an available nitrous or blower exhaust port option featuring a 73cc ultra high-flowing exhaust port.
( 13 )
$2,051.70
—
$3,014.55
$1,949.12
—
$2,863.82
On Sale
Scat Street Performance dampers are necessary for engines that want to reach higher-than-stock rpms. Their balancers are made from strong nodular iron and finished in black with easy-to-read white markings. Scat Street Performance dampers are offered for either street or strip, internally or externally balanced.
( 30 )
$101.99
—
$204.99
$96.89
—
$194.74
Special Offer
On Sale
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 210 )
$390.95
—
$747.95
$351.86
—
$673.16
On Sale
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 80 )
$220.95
—
$300.95
$198.86
—
$270.86
On Sale
These Scat I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. Scat Pro Comp I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers, and special hollow dowels with huge 7/16 in. ARP cap screw bolts to greatly increase strength and horsepower capabilities.
( 60 )
$72.99
—
$601.99
$69.34
—
$571.89
On Sale
These Scat cast crankshafts are perfect for mildly built street engines or just to replace stock crankshafts that have seen better days. These Scat crankshafts are precision-ground and micro-polished to exacting tolerances.
( 73 )
$268.99
—
$794.99
$255.54
—
$645.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
