Filters
On Sale
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
$4,849.99
On Sale
With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385
( 14 )
$4,189.99
$3,989.99
On Sale
ATK High Performance Chevy LQ9 6.0L short blocks with OE flat top pistons are great beginnings for your mild street build, or just as a replacement for a tired short block. ATK takes the hard work out of your project by selling blocks that are ready to complete yourself. Every great build needs a solid foundation. Start yours with one of ATK's Chevy LQ9 6.0L short blocks. Technical specifications: * Block: Seasoned 6.0L cast no. 364 or 184 * Bore/stroke: 4.030 x 3.622 * Year range: 2001-2007 * Displacement: 370 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24-tooth reluctor wheel * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: OE hypereutectic flat top with no valve reliefs * Piston rings: Moly rings * Compression ratio: 64cc = 10.7:1, 68cc = 10.2:1, 72cc = 9.8:1 * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Brass installed and sealed * Oil galley plugs: Installed and sealed * Weight: 285 lbs.
( 6 )
$3,198.99
$2,998.99
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 60 )
$3,129.99
—
$4,592.99
$2,929.99
—
$4,392.99
On Sale
Start your next engine build with one of these ATK High Performance Chevy LQ4 6.0L short blocks. The LQ4 is an ultra-tough basis for high-horsepower engines in their stock form, but ATK improved on it. These engines are hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that is ready for your choice of components to make it your own. These ATK High Performance Chevy LQ4 6.0L short blocks include the following: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons
( 1 )
$3,198.99
$2,998.99
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 9 )
$766.99
—
$892.99
$699.99
—
$799.99
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$982.95
—
$2,134.95
$519.99
—
$1,384.99
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$243.95
—
$554.95
$182.95
—
$359.95
On Sale
Summit Racing™ billet race valve covers are built for maximum performance applications. Machined from a single piece of solid 6061 billet aluminum and anodized black, the covers include a threaded oil fill cap, internal baffles, turbo oil returns (which can also be used as PCV vents), a raised height to clear most shaft rocker setups, and all mounting hardware and gaskets. Avoid leaks and clearance issues with Summit™ billet race valve covers.
Not Yet Reviewed
$549.99
$499.99
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$399.99
—
$499.99
$349.99
—
$449.99
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 141 )
$267.95
—
$631.95
$200.95
—
$472.95
On Sale
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 67 )
$191.95
$124.75
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 17 )
$27.37
$20.53
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$11.95
—
$26.70
$8.96
—
$20.03
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 41 )
$58.95
$38.32
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 82 )
$19.95
—
$22.90
$14.89
—
$14.96
On Sale
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 85 )
$191.95
—
$214.95
$131.25
—
$143.95
On Sale
Scott Drake billet aluminum power steering pump pulleys are designed to work exclusively on Ford power steering pumps. Depending on the year and engine size, Ford offered 2 different diameter pulleys, a 5 in. and 5.5 in. Be sure to measure your original pulley to get the right diameter. They are interchangeable and both will work for just about any application. The larger 5.5 in. diameter version is best suited for high-rpm operation as it will help protect the pump. The smaller 5 in. version provides more power assist at low-rpm especially idle but not ideal for racing or high-rpms.
( 6 )
$61.01
—
$68.15
$39.66
—
$44.30
On Sale
Holley modular LS Pontiac-style valve covers feature an OE height, internally-baffled base with integrated coil mounts for popular Gen I and Gen V-style LS coil bodies. The overcovers hide the unsightly LS coils and messy wiring harness—allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simulated oil fill cap which helps maintain the original Pontiac styling. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Holley's 2-piece LS Pontiac-style valve covers offer a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation! More product features and items include: * Available in various finishes * Base fits LS1, LS2, LS3, LS6, and LS7 engines with clearance for 0.750 in. lift cam with stock style rocker arms * Base features internally baffled ventilation system * Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, 2 billet simulated fill cap assemblies, hardware, and spacers for mounting both versions of LS coil bodies * Dress-up hardware and rubber grommets for the coil covers
Not Yet Reviewed
$586.95
$439.95
On Sale
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$92.69
—
$147.95
$60.25
—
$96.15
On Sale
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$292.95
$219.75
On Sale
Add some aluminum to your engine compartment with these Mr. Gasket diecast aluminum valve covers. They feature precision diecast aluminum construction for an exact fit. Their extended sealing lips positively locate and secure the gasket and prevent it from moving under pressure, eliminating oil leaks. The covers have a high-luster polished finish, and include a 1 1/4 in. breather hole, unless otherwise noted. They come in ball-milled or plain top models; the plain tops are a full .125 in. thick to enable custom milling or engraving.
( 1 )
$179.95
$116.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
