Availability
On Sale
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). MSD Timing Tapes help you to recognize the importance of the timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
( 122 )
$7.60
$6.84
On Sale
In today's higher rpm engines, the tip of the valve stem is subjected to tremendous abuse. The best solution to this problem is AFR's valve lash caps. These hardened caps are precision-machined and ground perfectly flat to maintain accurate valvetrain adjustment. They are available in multiple diameters. Select the valve lash cap designed for fitment on your application.
Not Yet Reviewed
$6.30
$5.98
On Sale
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 41 )
$10.30
$9.27
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 18 )
$9.82
$8.84
On Sale
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$8.23
$7.41
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$7.18
—
$10.82
$6.46
—
$9.74
On Sale
AFR offers valve seals for SBC/SBF Enforcer cylinder head applications from 1955 and up. The valve stem oil seals are made from Viton© rubber—and are designed to original specifications, ensuring proper fit and performance.
( 1 )
$2.10
$2.00
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$10.55
—
$11.95
$8.96
—
$9.50
On Sale
Crown Automotive rocker arm hold-down bolts are high-quality steel bolts made to fit specific applications. These pivot bolts are used to secure your rocker arm shafts when the old bolts break, become corroded, or have damaged threads. Crown Automotive is a leader in replacement parts for many vehicles.
( 6 )
$2.99
$2.69
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$6.95
—
$9.61
$6.26
—
$8.65
On Sale
Replace your old head bolts with Crown Automotive cylinder head fasteners. Head bolts withstand huge clamping loads and forces in their fight to keep the heads tightly sealed against their gaskets and the block. These heavy-duty fasteners are designed to hold parts together tightly. They're crafted and built to OEM specs for proper fit, form, and function. Whether you're repairing a blown head gasket or rebuilding a motor, order the Crown Automotive cylinder head fasteners designed to fit your application.
( 8 )
$1.99
—
$4.99
$1.79
—
$4.49
On Sale
If your oil filter connector has stripped threads, it can cause a major oil leak. Replace a worn or aging oil filter adapter connector with a new one from Crown Automotive to keep your engine running properly and your garage floor and driveway clean. These connectors are direct replacement OE-style oil filter adapter parts.
( 10 )
$6.99
$6.29
On Sale
Mr. Gasket crank pulley bolts are made from top-grade steel for strength and durability. Mr. Gasket crank pulley bolts also provide a clean appearance and are zinc plated to resist corrosion.
( 7 )
$10.82
$9.74
On Sale
Keep your valve springs in place with these AFR hardened spring cups. These spring cups are designed to give your valve spring a hardened surface to mate to so that the cylinder head is protected from damage and excessive movement is limited. AFR offers these hardened spring cups in a variety of diameters to help you find the right one to match your valve spring.
Not Yet Reviewed
$5.25
—
$7.99
$4.99
—
$7.59
On Sale
Crankcase vent tubes and elbows are relatively inexpensive items that help maintain the performance of your engine. Crown PCV (positive crankcase ventilation) vent tubes and elbows are offered in several styles for many Jeep, Dodge, and Ram applications. They provide effective removal of blowby gases, keep pressure at safe levels, and work to prevent oil leaks. Ensure your engine operates efficiently with Crown PCV vent tubes and elbows.
( 11 )
$1.99
—
$12.99
$1.79
—
$11.69
On Sale
Mr. Gasket baffled breather grommets are designed to virtually eliminate oil breather blowby. No tools are required for installation, as the baffled grommets simply replace the stock grommets. They are made to fit most valve covers that use 1.22 in. O.D. x 1 in. I.D. grommets. These grommets will not work with stud girdles, as they extend 1 1/4 in. into the valve covers.
( 9 )
$6.52
$5.87
On Sale
AFR Racing pushrod guideplates offer precise fit and function to keep your pushrods from deflecting under high-rpm conditions. They are manufactured from durable, hardened steel with a black oxide finish for long-lasting performance. The guideplates are available in different styles and sizes to accommodate various Chevy big block or small block type applications. Achieve the performance levels you need with an assist from AFR Racing.
( 14 )
$9.45
$8.98
On Sale
Replace your old oil filler cap with a chrome plated cap from Mr. Gasket. They are available in a variety of attachment styles to suit your needs, and they add a fresh look under the hood.
( 18 )
$9.95
—
$11.95
$7.77
—
$8.96
On Sale
Holley LS coil offset brackets were designed to help clear high-mounted alternators when ignition coils are mounted onto Holley LS/Tall LS valve covers. These service part replacements/add-ons are for Holley LS valve covers with 72mm-spaced coil mounting provisions and 5th generation LS coil bodies only. Each assembly consists of an LS coil offset bracket and two coil mounting bolts (standard M6 x 1.0 threads, 14mm long). Gain that critical one inch (roughly) of clearance space with Holley LS coil offset brackets.
( 3 )
$6.06
$5.45
On Sale
Whatever you need in a valve lock, Airflow Research can deliver! AFR valve locks are machined from durable chromoly steel. They're available in various valve stem sizes, 7 or 10 degree style, and either conventional or beadlock groove types to suit your application needs.
( 2 )
$4.20
$3.99
On Sale
When your original seals become hard and brittle, replace your valve cover grommets with Crown Automotive quality replacement parts for your Jeep. They are well-made, a snug direct fit replacement, and will install easily. Your seals may look fine, but if you're noticing a little oil on top, stop that leak with grommets from Crown.
( 16 )
$1.99
—
$5.99
$1.79
—
$5.39
On Sale
Engine braking (using one's gears to slow down) puts peak stress on the lower end bolts. Crown Automotive replacement connecting rod bolts are made of sturdy steel and can withstand greater pressures when properly torqued to the correct specs. Quality rod bolts are so crucial in engines that spin, and Crown is an industry leader in superior aftermarket parts.
( 2 )
$4.99
—
$7.99
$4.49
—
$7.19
On Sale
These gleaming, chrome-plated, push-on breather/oil filler caps from Mr. Gasket fit over your oil filler tube. They have a side fitting for easy PCV hose hook up.
( 2 )
$12.93
$8.40
On Sale
Have you ever tried to install a rocker stud into your cylinder head and watched it wobble as it screwed in? Don't take a risk installing bad rocker arm studs that may botch up your Eliminator or Outlaw race cylinder head installation. Just replace the bad with the new--AFR rocker arm studs that run in straight and true! These rocker arm studs are made of premium-grade chromoly steel and are heat-treated to tensile strength. Plus, stud lengths are exact to provide positive seating every time. AFR--a name you can trust!
( 2 )
$7.35
—
$9.45
$6.98
—
$8.98
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
