Availability
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 71 )
$4.99
—
$11.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$8.99
—
$12.99
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 73 )
$1.99
—
$11.99
If you've lost or damaged your piston pin lock rings, Speed-Pro has you covered. They offer replacements for all of their pin lock and Spirolox-style lock rings.
( 10 )
$2.99
—
$3.99
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). MSD Timing Tapes help you to recognize the importance of the timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
( 125 )
$8.28
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 50 )
$7.99
—
$10.99
What better way to secure your connecting rods than with genuine Chevrolet Performance bolts? Your rods are an important connection in your rotating assembly--making the fasteners that hold them together even more important. Choose the strength of Chevrolet Performance connecting rod bolts.
( 3 )
$2.99
—
$6.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 114 )
$5.99
—
$21.99
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 6 )
$6.99
—
$10.99
Did you lose or damage a valve cover bolt? Chevrolet Performance has you covered with these replacement valve cover bolts. They are just like your factory originals, so you have no worries about fit or appearance--everything will be just how the engineers at Chevy intended. Chevrolet offers these replacement valve cover bolts for most of their popular engines, so finding the right one will be easy.
( 15 )
$6.99
The best way to ensure that your oil pump will stay in place is to bolt it on with ARP oil pump bolt kits. They come in your choice of black oxide finished 8740 chromoly steel or stainless steel, and are rated at 170,000 psi tensile strength.
( 56 )
$7.99
—
$8.99
Keep your main caps secure with a set of Chevrolet Performance main cap fasteners. They are made from quality OEM materials and are built to strict tolerances to ensure a direct fit. You don't ever want to have a failure in your engine's rotating assembly. Pick up Chevrolet Performance main cap fasteners for maximum reliability.
( 6 )
$4.99
—
$6.99
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 95 )
$7.99
—
$9.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 284 )
$3.99
—
$11.99
These Chevrolet Performance pushrod guideplates are intended for use in high-rpm motors. They're designed to keep your pushrods in line with your lifter cups and rocker arms and prevent deflecting or walking sideways. These guideplates are hardened to prevent them from wearing prematurely.
( 13 )
$7.99
Chevrolet Performance offers an assortment of durable bolts for use on your camshaft installation Choose from among various materials, including steel and chromoly; finishes such as black oxided and natural; lengths, head styles, and thread sizes. These bolts are available for a wide range of engine sizes and camshaft component applications.
( 30 )
$2.99
—
$7.99
Melling oil galley barbell plugs are quality replacements for the galley barbell plugs on your LS engine. These oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. You don't want to overlook the little things for an enduring repair or build, so don't forget to order a Melling oil galley barbell plug.
( 3 )
$9.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 32 )
$5.99
—
$10.89
These Dart adjustable pushrod guideplates are designed to give you the extra flexibility in alignment that you need for cylinder heads with different spacing. They are manufactured from durable steel and install easily with no modifications.
( 18 )
$10.18
JE Pistons lock rings are designed for floating-pin pistons. Engines produced with press-fit pins can be converted to the "floating" type, providing that the piston has provisions for a lock ring retainer. Floating pins are preferred by most serious engine builders.
( 22 )
$2.69
—
$12.99
These Wiseco piston lock rings are designed for floating-pin pistons. Engines produced with press-fit pins can be converted to the "floating" type, providing that the piston has provisions for a lock ring retainer. Floating pins are preferred by most serious engine builders.
( 15 )
$2.62
—
$4.99
Summit Bucks
ACDelco GM Genuine Parts engine valve pushrods are available for a wide range of vehicles, including many Chevrolet, Cadillac, and GMC models. These steel replacements are designed, engineered, and tested to rigorous standards, all backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$4.99
—
$6.99
In today's higher rpm engines, the tip of the valve stem is subjected to tremendous abuse. The best solution to this problem is AFR's valve lash caps. These hardened caps are precision-machined and ground perfectly flat to maintain accurate valvetrain adjustment. They are available in multiple diameters. Select the valve lash cap designed for fitment on your application.
Not Yet Reviewed
$6.30
These Mahle lock rings are designed for floating-pin pistons. Engines produced with press-fit pins can be converted to the "floating" type if the piston has provisions for a lock ring retainer. Many power-forged and hypereutectic pistons are designed to accommodate either style of pin. Pick up these Mahle lock rings for reliability in your rotating assembly.
( 9 )
$2.61
—
$5.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
