Availability
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter trays—or buckets—will register your lifters to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 40 )
$35.99
—
$36.99
Summit Racing™ LS lifter valley covers are race-ready! Manufactured from 1/4 in. thick billet aluminum or cast aluminum. They are available in a plain, polished, black anodized, or copper finish for both gen 3 and 4 versions. Plus, they're etched with the Summit Racing™ logo for a high-tech look! Replace that factory cover with Summit Racing™ LS lifter valley covers.
( 23 )
$59.99
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 167 )
$30.99
—
$54.99
Summit Racing™ offers cylinder head bolt kits that will keep consistent clamping force on your heads and not your wallet! Our kits contain strong, high-quality steel bolts with either a black oxide or zinc plated finish for added durability. Some kits also include washers. Stay on budget--let Summit Racing™ help complete your cylinder head installation with our selection of cylinder head bolt kits.
( 83 )
$44.99
—
$53.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 313 )
$23.99
—
$53.99
Summit Racing™ LS2 timing chains provide heavy-duty timing performance! These steel single roller timing chains have the extra strength and reliability you need for beefed-up LS valvetrain setups.
( 47 )
$30.99
Our Summit Racing™ oil filter adapters include a oil bypass valve and come complete with mounting bolts. The oil filter adapters fit Chevrolet V8 engines from 1968-86.
( 141 )
$39.99
Summit Racing™ cast aluminum timing covers are the perfect addition to your powerhouse. They feature a stout diecast aluminum design to keep true, and have thick gasket rails for rigidity and optimum oil sealing. With their show-polished finish, you'll be sure to turn some heads when you pop the hood. These replacement timing covers are available in a variety of styles, shapes, and finishes—for year/make and engine applications from 1955 and up.
( 114 )
$43.99
These Summit Racing™ main bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 95 )
$20.99
—
$56.99
Summit Racing™ PCV valves are designed to fit into a standard 1.22 in. diameter hole in the valve cover. They are made from billet aluminum and are available in a polished or black finish.
( 146 )
$21.99
—
$29.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 307 )
$33.99
—
$54.99
Holley offers oil dipstick and tube kits for GM LS engines that are direct-fit assemblies for their LS retrofit oil pans. Each of these kits include the braided steel dipstick and black powdercoated steel tube built from the same high-quality materials as the OEM units. The oil dipstick and tube kits for GM LS engines provide both pieces together for one price to complement their oil pans.
( 33 )
$52.49
Performance cam designs require performance valve springs to keep everything under control and running smoothly. And modern springs with non-stock diameters require new retainers to handle the recommended higher pressures and installed heights. Summit's® steel valve spring retainers are an affordable solution. Precision-machined from 4140 chromoly and finished in black oxide, these retainers are specifically designed for positive retention and location when combined with performance valve springs. They're available for single, double, and beehive-style spring applications.
( 10 )
$50.99
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 958 )
$50.99
—
$61.99
Don't waste time installing a generic oil pump when you can get a high-quality Summit Racing™ pump that's ready to go. The high volume pumps deliver 20-25 percent more oil than the standard volume pumps, and are pressure-tested and hand-turned to guarantee performance. Available in iron and nodular iron for most applications.
( 184 )
$42.99
—
$51.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$20.99
—
$25.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 32 )
$21.99
—
$56.99
Don't trust any old brackets to hold your alternator. Use our Summit Racing™ billet aluminum alternator brackets to keep your alternator firmly in place and your belts in line. They feature a stout billet aluminum construction and include all mounting hardware.
( 335 )
$50.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 161 )
$20.99
—
$45.99
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 179 )
$22.95
—
$64.95
Summit Bucks
ACDelco offers engine timing covers for a variety of cars, trucks, vans, and SUVs. The aluminum replacements are available in different configurations for factory-style fitment. Some models also include gaskets and hardware. These parts are designed, engineered, and tested to rigorous standards—backed by General Motors. Order the OE direct-fit timing cover recommended for your vehicle.
( 3 )
$45.99
If your original spin-on filter adapter mounts are made out of cheap alloy, replace them with Summit Racing™ mounts. Get the benefits of a solid piece of aluminum holding your filter. They have a durable, hard-anodized finish and are designed to eliminate the filter bypass port, allowing for 100 percent complete filtration. These filter mounts include hardware and an O-ring seal for ease of installation.
( 18 )
$39.99
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 62 )
$20.99
—
$48.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$20.99
—
$54.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
