Availability
Chevrolet Performance Gen V LT1 head cam kits will increase your already-strong LT1. With CNC-ported heads and a camshaft designed specifically for direct injection, these kits offer the first "Hot Cam" for the Gen V LT1. Your kit may include: * Camshaft * Valve lifter guide * Valve lifters * CNC cylinder head assembly Note: Recalibration is required for accurate engine operation.
Not Yet Reviewed
$3,702.92
Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.
( 29 )
$1,329.99
Designed to provide even greater increases than World Products' own Sportsman II heads, the Motown 220 cylinder heads rate as the ultimate small Chevy cast iron heads. Features include high-tech 64cc combustion chambers, 220cc intake runners capable of excellent flow and velocity, high-flow ports, and standard 2.055 in. diameter intake valves. They're ideal for large-displacement small blocks (383 or larger), and are available in bare or complete assemblies with valves, retainers, screw-in studs, guideplates, and your choice of 1.440 in. or 1.550 in. valve springs.
( 1 )
$948.99
—
$1,048.63
AFR 195cc SBC Eliminator Street Heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. AFR 195cc heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect street heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your vehicle and engine.
( 40 )
$2,052.75
—
$2,328.90
Race-ready AFR 220cc SBC Eliminator racing heads feature 100 percent CNC-ported intakes with greater detail. They also come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. They also offer exceptional flow characteristics, a 23 degree valve angle, and standard valve spacing. These cylinder heads are perfect for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts).
( 22 )
$2,259.60
—
$3,423.00
Originally introduced in 1987, the latest versions of these Sportsman II heads from World Products continue to be the industry's most popular cast iron cylinder heads. Features include high-flow 200cc RightCast intake runners, Fast-Burn combustion chambers, and your choice of angled or straight spark plug locations. The ports are extra-thick with plenty of room for porting, and the heads are indexed off the chambers to ensure perfect alignment with the cylinders. Other features include universal end pads that'll accept all early and late model accessories, leak-free machined valve cover rails, and the ability to accept both perimeter and center bolt style valve covers. They are available in bare or complete assemblies with stainless steel valves, valve springs, retainers, locks, umbrella-style valve seals, screw-in studs, and pushrod guideplates.
( 4 )
$948.99
—
$1,048.63
Welcome to a new class of high performance cylinder heads--BluePrint Muscle Series! These aluminum heads are assembled with the perfect match of components for outstanding, trouble-free performance. Plus, they give you more power behind the wheel and in your wallet! These all-cast heads are designed for hydraulic flat tappet and hydraulic roller cam engines with hefty intake runners, stainless steel valves, Viton® seals, and dual springs. BluePrint Engines stand in front of the class, offering both performance and cost-conscious enthusiasts a powerful alternative--Muscle Series cylinder heads.
( 86 )
$1,399.00
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
( 2 )
$10,868.33
AFR 210cc SBC Eliminator racing heads are available in two stages of performance. The race-ready version features 100 percent CNC-ported intakes—and 100 percent CNC-ported intakes with greater detail. They come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make these the perfect cylinder heads for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts). The 210cc aluminum cylinder heads are available for either standard or spread port exhausts, bare or assembled style.
( 16 )
$2,259.60
—
$3,502.80
AFR 195cc SBC Eliminator competition heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. These heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port with competition porting and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of the AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect competition heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your year/make and engine family.
( 3 )
$2,776.20
—
$3,166.80
If huge horsepower is what you're searching for, then AFR 345cc Magnum BBC cylinder heads will certainly deliver. They're recommended for radical street/strip, Pro Street, or racing applications on engines up to 572 cu. in. operating below 7,000 rpm—and are capable of flowing 400 cfm at 0.700 in. of lift. These A356 aluminum heads are designed for maximum horsepower and rpm capability, with an average primary operating range of 3,500-8,000 rpm; they also provide impressive torque figures. AFR recommends the use of .120 in. wall pushrods and full-roller rocker arms for strength. It's vital that you check clearance of all moving parts due to the vast array of rocker arms, lifters, cams, springs, etc. Don't forget to check pushrod-to-head clearance, as well as any potential interference from your rocker arms and spring assemblies prior to final engine assembly. AFR 345cc Magnum BBC cylinder heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves.
( 4 )
$3,158.40
—
$4,050.90
Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.
( 13 )
$1,654.95
BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.
( 9 )
$6,649.00
—
$10,199.00
AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.
( 9 )
$2,052.75
—
$2,328.90
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 11 )
$2,389.95
ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 1 long block crate engines are classics with great street manners, and vacuum to power all your accessories. These Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 350 345 hp base long block engines consist of: * Seasoned OE short block with 4-bolt mains * OE cast crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly piston rings * Hydraulic roller camshaft * 220/224 at .050 in. * .495 in./502 in. lift 110 LSA * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * Valve covers * Timing set and cover * Oil pan, high volume oil pump with pick-up tube
( 12 )
$3,198.99
These Brodix Cylinder Heads Dragon Slayer 23 degree cylinder heads offer exceptional economical out-of-the-box horsepower. They allow the combustion chamber to flow over 300 cfm @ .600 cam lift. The as-cast other ports are built for excellent flow and the 23 degree valve angle allows for standard rocker arms and other bolt-on components to be used. Features include: * 225cc as-cast intake ports * 64 or 68cc CNC-ported combustion chambers * 2.08 intake/1.60 exhaust valves * End-milled and drilled for accessories
( 5 )
$1,372.99
—
$2,771.99
These famous Mopar Performance W2 cast iron race cylinder heads feature increased wall thickness on the exhaust flange and large heavy-duty ribs added to each end of the head for increased stiffness. They also feature a 47cc open combustion chamber with revised intake port cores, flat machined rocker pads that require rocker stands, and longer valves for higher-lift camshafts.
Not Yet Reviewed
$626.99
If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.
Not Yet Reviewed
$4,591.65
—
$5,184.90
AFR 180cc LT1 Eliminator Street heads are emissions-legal (CARB E.O. #D-250-2 for engines up to 1994), and are available in the LT1 angle plug version only. These heads feature a 55cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. Their flow characteristics, ideal operating range of idle to 6,000 rpm (higher rpm ranges are possible, depending on the combination of parts), 23 degree valve angle, and standard valve spacing make AFR 180cc LT1 Eliminator Street heads perfect for 350 to 383 c.i.d. engines. They are specifically designed for 1992-95 Corvettes and 1993-97 Camaros and Firebirds.
Not Yet Reviewed
$2,233.35
—
$2,499.00
AFR 210cc SBC Eliminator competition heads are available in two stages of performance. These high-flowing cylinder heads feature 100 percent CNC-ported intakes with greater detail. They come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make these the perfect heads for 350 to 400 c.i.d. engines. They're designed for bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts). The 210cc aluminum cylinder heads are available for either standard or spread port exhausts, bare or assembled.
Not Yet Reviewed
$2,835.00
—
$3,193.05
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 1 )
$9,099.00
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 20 )
$2,841.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
