Availability
These billet serpentine systems are easy to install, budget friendly, and styled just right. Summit serpentine belt systems start with a CNC-machined, 1/2 in. thick, 6061 T6 billet aluminum face plate, which has positive belt adjusting holes for both the alternator and A/C pump, plus beveled edges and a machined Summit logo. You also get CNC-machined 6061-T6 billet aluminum crank, water pump, alternator, power steering, and clutch cover pulleys, plus a chrome 105 or 140 Amp alternator, a chrome Sanden SD-7 A/C compressor with manifold lines (as noted), an as-cast aluminum GM Type 2 power steering pump (as noted), an as-cast GM high-flow water pump, a serpentine belt, and all the mounting hardware you need. It might look fancy, but adjustments are easy, all you need is a pinch bar and a socket wrench.
( 10 )
$2,599.99
—
$3,199.99
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
Howards Cams Reaper billet steel crankshafts are more robust than most because they have a uniform and non-stress grain structure. These cranks start with E4340 aircraft-quality bar stock material and are precision CNC-machined. They feature bearing journals with large fillet radii (chamfered bearings required) and weight-reducing holes in all rod journals. Reaper crankshafts are available for fitment in a variety of big block applications. Additional product details: * Computer-designed center counterweights for reducing bearing loads and improved balance * Fully stress-relieved and shot-peened * Nitrided for superior wear-resistance * Rod and main bearing journal surfaces are micro-polished * Double keyways for dampers
Not Yet Reviewed
$1,659.99
On Sale
World Products has improved virtually every area of the new Merlin Gen VI engine blocks, producing one of the most technologically advanced and best-performing iron BBC engines available today! New features on these big block Chevy engines include thicker main webs for increased strength and thicker cylinder walls (nominally .250 in. @ 4.600 in. bore). They can utilize OE roller lifters or +0.300 in. tall aftermarket tie bar lifters. The World Products Merlin Gen VI engine blocks also include a standard Mark IV fuel pump boss for those wanting to keep a mechanical fuel pump.
( 1 )
$3,842.02
$3,457.82
Brodix SR20 cylinder heads feature the cutting edge of conventional big block Chevy compatible technology. Their new design raises the bar to a level that is unreachable by the competition! Inspired by TPSA technology, they surpass any other head in their class by leaps and bounds. The SR20 cylinder heads utilize a .500 in. raised 440cc intake port with a 2.400 in. intake valve, flowing an unheard-of 507 cfm. The exhaust port flows an amazing 335 cfm through only a 1.800 in. diameter valve. To allow for the newly designed 95cc combustion chamber, the intake valve angle of these heads has been rolled to 20 degrees. Brodix SR20 cylinder heads will require pistons, valve covers, head studs, shaft rockers, and an intake manifold specifically designed for them.
Not Yet Reviewed
$3,352.99
Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads raise the performance level over as-cast small block Chevy heads. Their 68cc CNC-machined combustion chambers and 235cc CNC-ported intake runners allow for the use of 2.125 in. O.D. intake valves over 335 cfm of airflow. Each unit is cast from aerospace A356 aluminum alloy and includes improved solid rocker bars for stability, drilled and tapped end pads, and revised spark plug locations for improved flame travel. For all-around performance on land or sea, install Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads. Additional Information: * Bronze guides for reduced stem wear * Available with or without water jackets * For 400+ c.i.d. engines * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder
( 1 )
$886.16
Crower billet crankshafts offer premium quality at not-so-premium prices. Crower manufactures these from milled round bars to produce steel billet crankshafts for just about any engine make and horsepower needs. Premium materials--either billet 4340 chromoly or EN30B steel--are used to create their cranks. They are precision CNC-machined on state-of-the-art equipment by master craftsmen for precise indexing and throw-to-throw consistency. Choose a better made billet crankshaft from Crower and choose peace of mind.
Not Yet Reviewed
$6,287.99
—
$7,736.99
Ford Performance Parts 427 c.i.d. Boss short block assemblies provide you with the perfect foundation for building your high-horsepower Boss engine. They start out with an iron 4-bolt main Boss block with a 9.500 in. deck height, then add a 4.000 in. stroke steel crankshaft and a set of forged steel H-beam connecting rods with floating pins, and top that off with a set of 4.125 in. bore forged pistons. Ford Performance Parts 427 c.i.d. Boss short block assemblies require Boss cylinder head bolts or studs and Ford Performance Parts or aftermarket cylinder heads. Additional technical information: * Engine type: 351 based small block Ford * Iron 4-bolt main block with 9.5 in. deck height (M-6010-Z351) * .005 in. below piston to deck height (nominal) * SCAT forged steel 4.000 in. stroke crankshaft * SCAT forged steel H beam connecting rods with floating pins and ARP bolts * Mahle 4.125 in. forged pistons, with reliefs for Z304D, Z304P, N351, and other inline valve Windsor cylinder heads * 17 cc piston dish; check piston to valve clearance * Hydraulic roller camshaft compatible; requires aftermarket tie bar hydraulic lifters * 0.060-inch oil galley restrictors included for solid roller cam applications * Internally balanced * Uses standard Windsor timing cover (M-6059-D351) * Standard Windsor oil pan flange * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Compatible with most aftermarket performance cylinder heads; designed for 20 degree valve angle heads and will fit stock or spread valve guide centerlines * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Requires M-6051-R351 head gaskets * High-performance harmonic balancer M-6316-D302 recommended * Built with all new parts * Hand assembled in the USA with performance clearances * Photo and specifications may vary
Not Yet Reviewed
$5,333.99
Edelbrock LS bare race blocks are designed to meet the needs of today's high performance engine builders and racing enthusiasts. They are available in standard and tall deck height combinations and are engineered for maximum clearance around a 4.600 in. stroke crankshaft. With their unique design, Edelbrock engineers were able to minimize windage in the rotating assembly, leading to superior engine lubrication at higher rpm. To make them friendly for existing race applications, these blocks contain both factory and motor plate race mounts for Gen I, II, III, and IV engines. Each LS bare race block receives a CT scan to ensure maximum performance and consistency. Standard features include: * Designed from aircraft-quality A357 T-6 aluminum * Siamese cast bore walls (4.125 in. or 4.165 in. diameter) with press-in cast iron sleeves * Machined with 55mm cam bearing journal * Available in standard (9.240 in.) and tall (9.750 in.) deck heights with beefy deck thicknesses (.500 in. standard/.750 in. tall deck); standard (5.87 in.) and tall (6.38 in.) deck cylinder sleeves are available * 6-head bolt design with full water jacket around cylinder walls; large windows in the valley allow access to an inboard 6th head bolt * Block design includes large front and rear -12AN side feeds for serious dry sump setups * Material for oversized lifters with lifter bosses are designed to clear tie bar-style lifters
Not Yet Reviewed
$6,904.95
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 32 )
$3,931.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
