Availability
Showing In Stock Items. Show All 71 Items.
Manley Pro Series crankshafts can make your short block bulletproof. They feature forged 4340 construction and undergo a multi-step heat-treatment process and are then nitrided for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed. Manley Pro Series crankshafts have micro-polished large .125 in. radius journals, gun-drilled mains, and lightened rod journals for weight reduction. The counterweights are fully profiled and they are designed for internal balancing.
( 9 )
$873.46
—
$1,106.39
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,549.95
Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included
( 11 )
$2,249.99
—
$3,399.99
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
Stay ahead of the competition with high-flowing AFR 235cc SBC Eliminator Competition Racing heads. Intake ports, exhaust ports, and cylinder heads are 100 percent CNC-ported with finer machine levels and improved port-shaped details for optimum flow characteristics. AFR Eliminator Competition heads will satisfy your big displacement small block Chevy engine's need for more air—and to achieve additional cooling in the center of the head, spread port styles are offered. Eliminator Competition heads come complete and ready-to-run with AFR power-proven components—or choose "bare" (no parts) heads to create your own personal power package! Go with AFR cylinder heads—high performance components built for racers, by racers.
( 4 )
$3,820.95
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,398.99
Utilizing the latest in computer aided solid modeling and CNC machining centers, Callies offers the best designed, highest quality crankshafts, connecting rods, and camshaft inventory available on the market today. Callies understands not everyone has the need or budget for a Magnum or billet crankshaft, but still may want a product with more to offer than their Compstar line. Callies went to work for a solution, which culminated in the creation of their Apex Series of crankshafts. The Apex crankshafts are made on the same forgings that Callies uses to make their Magnum Series but are machined by the supplier that makes the Compstar line. Like Compstar, the Apex crankshafts are finish sized and fully inspected in-house. This results in the best bang-for-your-buck crankshaft on the market. Callies takes pride in staying ahead of the competition with the latest high tech design and manufacturing advantages of their products. Callies Apex LS/LT standard features include: * Made on Callies proprietary Magnum forging * Ultra-pure, premium 4340 material machined by Callies vetted and reliable Compstar supplier * Machined by Callies vetted and reliable Compstar supplier * Nitrided for optimal hardness and wear resistance * Every crankshaft is finished and inspected in-house at Callies Limited stroke and pin size combinations * Limited stroke and pin size combinations
Not Yet Reviewed
$2,493.00
AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.
( 9 )
$2,328.90
Originally introduced in 1987, the latest versions of these Sportsman II heads from World Products continue to be the industry's most popular cast iron cylinder heads. Features include high-flow 200cc RightCast intake runners, Fast-Burn combustion chambers, and your choice of angled or straight spark plug locations. The ports are extra-thick with plenty of room for porting, and the heads are indexed off the chambers to ensure perfect alignment with the cylinders. Other features include universal end pads that'll accept all early and late model accessories, leak-free machined valve cover rails, and the ability to accept both perimeter and center bolt style valve covers. They are available in bare or complete assemblies with stainless steel valves, valve springs, retainers, locks, umbrella-style valve seals, screw-in studs, and pushrod guideplates.
( 4 )
$731.49
—
$994.84
AFR 195cc SBC Eliminator LT 23 degree cylinder heads feature100 percent CNC-ported intakes, exhausts, and chambers, as well as A356 aluminum castings and high-quality components throughout. They are emissions-legal (CARB E.O. #D-250-2 for engines up to 1994). These LT1/LT4 heads are designed for the Gen II reversed-cooled SBC engines from 1992-97, and are machined to accept both center bolt and perimeter bolt valve covers. Their excellent build and flow characteristics are recommended for displacements up to 400 cu. in. with an operating range up to 6500 rpm (6,500 – 6,800 rpm for the Competition heads). AFR 195cc SBC Eliminator LT heads typically include: * 8mm bead lock intake and exhaust valves * Hydraulic dual valve spring * 7 degree chromoly retainers * 7 degree bead lock valve keepers * ARP rocker studs * Adjustable 5/16 in. guide plates * Viton valve seals * Hardened valve spring * Ductile iron intake and exhaust valve seats * 8mm bronze valve guides
( 1 )
$2,499.00
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
PROMAXX Performance goes one up with their Vortec 185cc iron cylinder heads. Popular with street/strip enthusiasts and Circle Track racers, PROMAXX designed these heads to work well on 350-383 applications. They're available bare or assembled; both feature screw-in studs and large diameter spring pockets. In addition, they both accept centerbolt and perimeter bolt valve covers—and are drilled for Vortec and carbureted intake applications. Greater performance at the right price!
( 14 )
$822.00
—
$1,022.00
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$5,749.99
Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings
Not Yet Reviewed
$5,499.99
VEGE Chevrolet 350 C.I.D. Vortec remanufactured long block crate engines are reverse engineered to ensure that any original defects are removed, saving you time and money. Each crate engine can produce 290+ hp and 375+ ft.-lbs. of torque when it's equipped with a high-rise dual plane intake and 650 cfm carburetor. Start your budget-minded build with an excellent foundation--a VEGE Chevrolet 350 c.i.d. Vortec remanufactured long block crate engine. Engine specifications: * Block: Seasoned GM 350 c.i.d. block -- 2-bolt main -- One-piece rear seal * Bore/stroke: Up to 4.060 in. x 3.480 in. * Displacement (cu.in): 350 c.i.d. * Crankshaft: OE cast * Rods: OE reconditioned PM rods * Pistons: Hypereutectic 9.4:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: -- 191/194 at 50 -- .414 intake/.428 exhaust -- 111 LSA * Cylinder heads: -- OE Vortec 64cc -- 1.94 intake/1.50 exhaust * Rocker arms: Stamped steel 1.5 ratio * Oil pan: Stock 5 qt. * Valve covers: Chrome center bolt * Timing cover: Chrome Note: Can work with factory Vortec system or used as a retrofit with Vortec dual plane intake and carburetor.
Not Yet Reviewed
$3,099.99
ATK High Performance Chrysler 408 Magnum 465 hp Stage 3 long block crate engines are a great way to upgrade your old Mopar-equipped vehicle. These Magnum-based 408 c.i.d strokers have a lopey idle and great low/mid-range power, just perfect for a muscle car or truck. The technical specs for ATK Chrysler 408 Magnum Stage 3 crate engines are: * Horsepower: 465 hp * Torque: 535 ft.-lbs. * Block: seasoned OE 1993-2001 Magnum block * Bore/stroke: 4.040 x 4.000 * Displacement: 408 c.i.d. * Crankshaft: nodular iron 4.000 in. stroke internally balanced * Connecting Rods: 4340 forged I-beam with ARP 8740 Bolts * Pistons: forged * Piston rings: moly rings * Compression ratio: 10.1:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 229/233 @.050 in., .520 intake/.515 exhaust * Camshaft bearings: installed and clocked to OEM position * Cylinder heads: Edelbrock Performer RPM aluminum 58cc/176cc 2.02/1.60 * Freeze plugs: brass installed and sealed * Rocker arms: billet aluminum 1.6 full roller * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. center sump * Weight: 430 lbs.
( 2 )
$9,882.99
ATK High Performance GM 383 Stroker 415 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 415 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * Scat nodular iron crankshaft * Scat I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$6,098.99
Howards Cams Reaper billet steel crankshafts are more robust than most because they have a uniform and non-stress grain structure. These cranks start with E4340 aircraft-quality bar stock material and are precision CNC-machined. They feature bearing journals with large fillet radii (chamfered bearings required) and weight-reducing holes in all rod journals. Reaper crankshafts are available for fitment in a variety of big block applications. Additional product details: * Computer-designed center counterweights for reducing bearing loads and improved balance * Fully stress-relieved and shot-peened * Nitrided for superior wear-resistance * Rod and main bearing journal surfaces are micro-polished * Double keyways for dampers
Not Yet Reviewed
$1,659.99
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
ATK High Performance GM 383 Stroker 500 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 500 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$8,198.99
Spruce up your Ford Flathead-powered hot rod with March Performance Ford Flathead-style track serpentine conversion kits! If your rod still has the old V-belts, these kits are the best way to get modern serpentine belt reliability with no-slip operation, along with the comfort of air conditioning--and gorgeous styling, too! They feature a compact design with an inward mounted alternator and A/C units, making them perfect for use with tall, narrow hoods. Their 105 amp alternator provides all of the electrical power you need, and two water pumps provide excellent cooling. Two idlers guarantee all the belt wrap you need for no-slip performance. These kits are available with or without a unique center mounted remote power steering pump.
( 2 )
$2,433.99
Eagle rotating assemblies can take a lot of worry out of your engine building project. Eagle's heavy-duty rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. Perfect for the most extreme competition engines, including exotic fuels, heavy nitrous, and high boost, Eagle's HD rotating assemblies are equipped with Eagle's forged 4340 center-counterweighted crank (when available), forged H-Beam rods with ARP 2000 or L19 bolt upgrade and purpose-built heavy duty pistons. The pistons used in Eagle's heavy-duty assemblies are built for high boost levels or bucket-loads of nitrous. Every part is top-of-the-line and ready to support whatever you want to throw at it. Most all assemblies are available balanced or unbalanced if you'd rather your machine shop balance it. Along with crank, rods, pistons, every assembly includes bearings from either King or Clevite and rings suited to the intended application. Externally balanced assemblies balanced by Eagle will also include a harmonic damper and flexplate (or flywheel for some Fords) from Pioneer. Order the model designed for fitment on your year/make vehicle and engine application.
Not Yet Reviewed
$3,366.99
On Sale
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 125 )
$649.99
$599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
