4 Results Found For "msd"

Showing In Stock Items. Show All 9 Items.

Individual Parts

Part Groups

Results 1 - 4 of 4

BluePrint Engines Pro Series Chevy 454 C.I.D. 563 HP Dressed Long Block Crate Engines

For those wanting maximum horsepower and durability that's pretty much ready to go, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp dressed long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 dressed long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer * MSD Pro billet distributor * 950 cfm carburetor * Aluminum intake manifold

Not Yet Reviewed

$11,199.00

ATK High Performance Ford 302 375 HP Stage 3 Long Block Crate Engines with EFIes with EFI

ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel

Not Yet Reviewed

$7,284.99

Manufacturer Rebate

Chevrolet Performance L8P 6.6L 400 C.I.D Engine Assemblies

By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.

Not Yet Reviewed

$8,948.80

Ford Performance Parts X2347 Street Cruiser Dressed Long Block Crate Engines

The most popular crate engine size just got better and easier with Ford Performance Parts X2347 Street Cruiser dressed long block crate engines. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam/cylinder head/intake manifold/carburetor combination that runs on pump gas. Guesswork and installation issues are eliminated with a complete intake and distributor package that has been developed and tested by Ford Performance engineers. The X2347D engines are hand-assembled and dressed out with the best aftermarket performance parts translating into 360 hp and 400 lb.-ft. of torque at the crank! Ford Performance X2347 main features: * 4.030 in. bore and 3.400 in. stroke * Boss 302 8.2 in. deck height block * SCAT forged steel crankshaft * SCAT forged steel I-beam connecting rods * Forged Mahle pistons with floating wrist pins * Ford Performance aluminum, 64 cc chamber cylinder heads * 1.94 in. intake valves, 1.54 in. exhaust valves * 9.6:1 compression ratio * Edelbrock Performer RPM Air Gap manifold * Holley Street Avenger 570 cfm carburetor * 1.6:1 ratio roller rocker arms * Ford Racing black satin aluminum valve covers * MSD billet distributor * Ford Racing 9mm black spark plug wires * Hydraulic roller Comp Cams .533 in. lift intake and exhaust with 206 degree duration intake and exhaust at .050" lift * Double roller timing chain set * Ford Racing SFI-approved harmonic damper * High performance front or rear sump 7-quart capacity oil pan with windage tray and scraper * Maximum recommended rpm: 6,000 rpm * Internal balance; use neutral balance flywheel

Not Yet Reviewed

$14,029.71

Page 1 of 1