Availability
Showing In Stock Items. Show All 11 Items.
Summit Bucks
S&S Cycle offers MK-Series Performance crankcases for a variety of Harley-Davidson Touring and Softail street bikes from 2017 and up. These assembly replacements enable you to build massive power easily and reliably, particularly with M8 engines, and stock cases can't provide the necessary quality base. MK-Series crankcases are designed to allow for larger bores, scrape more oil than stock, have a larger volume sump, and fit in a stock frame without modification. Order the model recommended for your application.
Not Yet Reviewed
$2,849.95
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$5,038.95
—
$5,565.20
Dart LS Next cast iron bare blocks integrate the robust heritage of a traditional Chevy small block with the performance potential of the late model LS engine architecture. The blocks are designed to rectify some of the former LS's more noticeable shortcomings on the bottom end—while still supporting high-flow and efficient cylinder heads developed for Gen III and IV platforms. They're available in multiple engine block styles, including stock/OEM standard deck and aftermarket. Dart LS Next blocks are back and better than ever! Highlight features of the LS Next cast iron bare blocks include: * Cast with premium cast iron alloy * Conventional style 4-bolt steel main caps * Full main webbing for maximum bottom-end strength * Extended cylinder barrels at the bottom to provide greater piston support for all combinations * Extra-thick Siamese cylinder bores * Blind head bolt holes don't go through into the water jacket * Provision for oil restrictors in the lifter valley * Revised low-restriction priority main oiling system * Pro-Stock/Pro-Mod big block style stepped main oil galley * External oil filter (must be used with stock or aftermarket oil pumps) * Dual starter mounts * Expanded water jacket on #1 cylinder for additional cooling capacity * LSX-style lifter bosses and dog bone provision are provided
Not Yet Reviewed
$3,999.99
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
Summit Bucks
Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These brand new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included
( 11 )
$3,349.99
Ford Performance Parts 2018 Gen 3 5.0L Coyote production cylinder blocks are original equipment for the 2018 Mustang GT 5.0L. They feature a plasma-transferred wire arc spray weld liner coating. This provides improved durability and heat transfer, reduced friction, and weight savings compared to previous Mustang GT aluminum blocks. All Ford Performance 2018 Gen 3 5.0L Coyote production cylinder block features are finish-machined, including head deck and crank bore. Features and items: * 93.0mm bore * Cylinder bores are finish-honed and ready to assemble * Cross-bolted nodular iron main bearing caps—uses 12mm cylinder head bolts * Block has provisions for piston oil squirters (included) * Plugs and dowels
Not Yet Reviewed
$1,304.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
