Availability
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 114 )
$4.99
—
$21.99
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 49 )
$7.99
—
$10.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 108 )
$5.99
—
$7.99
If you've lost or damaged your piston pin lock rings, Speed-Pro has you covered. They offer replacements for all of their pin lock and Spirolox-style lock rings.
( 10 )
$2.99
—
$3.99
Summit Racing™ valve cover grommets are designed to control oil leakage into breather caps and keep oil from getting all over your valve covers. The baffled grommets help to eliminate oil blowby, as well. These inexpensive replacements are made to fit most stamped or diecast valve covers. Order the size and style preferred for your application.
( 148 )
$3.99
—
$9.99
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 36 )
$7.99
—
$8.99
Summit Racing™ offers valve cover breathers in a variety of styles, sizes, materials, and finishes. They're designed to fit most stock or aftermarket valve covers. Add a dash of flash under the hood; top off your valve covers with snazzy breathers from Summit Racing™.
( 120 )
$5.99
—
$12.99
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter trays—or buckets—will register your lifters to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 39 )
$9.99
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 39 )
$7.99
—
$9.99
Summit Racing™ offers camlock plate and cam bolt kits for a variety of Chevrolet big block, small block, and LS engine applications from the 1950s and up. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. They include Grade 8 camshaft bolts and a locking plate that locks them into place after they're torqued to spec. Keep your cam and timing gear locked securely together; order the kit recommended for your vehicle.
( 46 )
$2.99
—
$8.99
Who needs ugly timing cover bolts when you can have a nice chrome set from Summit Racing™? These bolts not only fasten your timing cover, they add to the overall effect of you other chrome accessories.
( 25 )
$5.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 50 )
$1.99
—
$11.99
Our Summit Racing™ cam buttons will keep your camshaft from walking back and forth in your block, which can lead to inaccurate timing and premature timing chain wear. The buttons are available in a variety of materials, sizes, and styles. They install with a standard cam bolt locking plate. Order the model recommended for your vehicle and engine application.
( 30 )
$4.99
—
$11.99
Oil pan pressure relief valve plugs are typically used to delete the secondary pressure relief valve when the Active Fuel Management (AFM) and/or the Variable Valve Timing (VVT) has been deleted. Our Summit Racing™ LS Oil Pan Pressure Relief Valve Plugs feature steel construction, a black finish, internal Allen-style head, and include an aluminum crush washer to deliver a complete seal into most LS pans with a secondary pressure relieve valve.
( 1 )
$6.99
Replace your dingy old timing pointer with one of our Summit Racing™ chrome plated timing pointers. These pointers look great with other chrome accessories, and the easy-to-read graduations will allow you to verify your engine's timing at a glance.
( 63 )
$4.99
—
$6.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 34 )
$4.99
On Sale
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 41 )
$10.30
$9.27
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 32 )
$4.99
—
$10.89
Our precision timing tape is designed to allow you to accurately time street or high performance engines and properly set the valve lash.
( 228 )
$4.99
These Wiseco piston lock rings are designed for floating-pin pistons. Engines produced with press-fit pins can be converted to the "floating" type, providing that the piston has provisions for a lock ring retainer. Floating pins are preferred by most serious engine builders.
( 15 )
$2.62
—
$4.99
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 95 )
$7.99
—
$9.99
On Sale
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$8.23
$7.41
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 44 )
$9.99
—
$11.99
These Summit Racing™ replacement rocker arm ball and nut kits are made for stamped steel rockers. When rebuilding an engine, it is recommended to replace the rocker studs along with the rocker ball and nuts.
( 25 )
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
