Availability
BTR connecting rod bolts are stock replacements for Gen III and Gen IV LS engines. An important connection in your rotating assembly, your rods need the correct fasteners to hold them together. You can be confident that the fit and strength of BTR connecting rod bolts will do the job.
( 4 )
$2.99
ACDelco GM Genuine Parts harmonic balancer bolts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bolts fasten vehicle components together. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles.
( 1 )
$6.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 287 )
$3.99
—
$11.99
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 98 )
$7.99
—
$9.99
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 174 )
$3.99
—
$10.99
The best way to ensure that your oil pump will stay in place is to bolt it on with ARP oil pump bolt kits. They come in your choice of black oxide finished 8740 chromoly steel or stainless steel, and are rated at 170,000 psi tensile strength.
( 56 )
$7.99
—
$8.99
ACDelco GM Genuine Parts engine valve pushrods are available for a wide range of vehicles, including many Chevrolet, Cadillac, and GMC models. These steel replacements are designed, engineered, and tested to rigorous standards, all backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$3.99
—
$9.99
End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation and removal easier. They are available in 170,000 psi high performance kits and 190,000 psi Pro series kits.
( 277 )
$2.99
—
$7.99
No more broken rockers! BTR rocker arms are designed to provide superior movement of inertia, compared to roller tip rockers, for max RPM. Their all-new 1.7 ratio drop-in design is perfect for cathedral port and square port (exhaust only), but will also work on the exhaust side of the L92/LS3 head. Constructed of bare steel, these BTR rocker arms are 46 percent stronger than stock Chevrolet rockers in FEA analysis--and feature an extended tip design that will allow for higher valve lift and improved valve tip durability.
( 2 )
$9.99
ACDelco GM Genuine Parts engine valve springs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. These replacement springs are made from factory materials--and are available for over a thousand vehicle applications from Chevy, Buick, Hummer, Pontiac, Cadillac, GMC, Isuzu, and Saab.
( 1 )
$5.99
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 74 )
$3.99
—
$10.99
BTR camshaft bolt kits will easily end your camshaft timing worries. These fasteners offer easy installation and removal with their reduced head size. If you're installing a new cam or simply upgrading the hardware, order the BTR camshaft bolts recommended for your year/make and engine application.
( 9 )
$2.99
—
$4.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
Brodix Cylinder Heads Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. These valve locks are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Brodix Super valve locks are designed to fit any 10 degree retainer and are recommended for all race applications due to their superior strength.
( 1 )
$2.99
ACDelco GM Genuine Parts replacement bolts are available for a variety of applications, including transmission torque converter housings. Installing factory-recommended hardware helps to ensure the same performance, durability, and service life you expect from General Motors.
( 14 )
$3.99
WIX Filters XP oil filters are engineered for today's toughest driving conditions. WIX XP filters feature wire backed synthetic media that is designed to maximize the protection of full synthetic oil. XP filters are ideal for vehicles subject to towing trailers, high idling conditions, stop-and-go city driving, and harsh driving environments. Outfit your ride with WIX filters XP oil filters.
( 53 )
$7.99
—
$9.99
Improve your vehicle's performance by replacing your clogged PCV valves with new ones from Beck/Arnley. Clogged PCV valves mean poor performance from your car--poor idling, poor gas mileage, and no power. Beck/Arnley quality replacements provide a perfect fit every time for your vehicle. Check and clean your PCV valves periodically, and when you need to replace, choose Beck/Arnley.
( 24 )
$4.99
—
$12.99
Allstar Performance breather socks help catch residual oil discharged from the engine through valve cover breathers. They offer a practical alternative to wrapping dirty shop rags around valve cover breathers! The socks fit over standard 3 in. diameter, 2 1/2 in. tall valve cover breathers and are easily cleaned with a mild detergent. They're available for both standard and shielded breather models.
( 6 )
$7.99
—
$9.99
ATI harmonic balancer bolt kits are comprised of extra-strength chromoly steel bolts that can be used with ATI and other popular dampers. The kits are designed for the balancer to crank attachment to secure the balancer in place and keep it there, even under severe conditions.
( 24 )
$8.75
—
$9.49
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
Allstar Performance Crankshaft Keys will restore proper timing gear and dampener positioning. They are available for short, long, and Vortec applications. Replace worn crankshaft keys with new ones from Allstar.
( 4 )
$4.99
CP Piston wrist pin locks are designed for floating-pin pistons. CP Piston wrist pin locks are manufactured from steel, making these wrist pin locks durable for all of your applications. Get a pair of these wrist pin locks today!
( 4 )
$3.25
Allstar Performance water pump pulley shims are designed for use with large or small water pump bolt patterns to help properly align pulleys. Allstar pulley shims have a dual bolt pattern to fit most GM and Ford water pumps.
( 13 )
$9.99
ACDelco GM Genuine Parts multi-purpose threaded plugs are manufactured to be an exact replacement for your GM vehicle. GM original equipment parts give you peace of mind that the fit, form and function is of the highest standards. Get the same original equipment replacement parts from the same source as General Motors with ACDelco.
( 1 )
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
