Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
65 Results Found For "rod"
Showing In Stock Items. Show All 77 Items.
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 168 )
$9.50
—
$9.99
BTR Connecting Rod Bolts
BTR connecting rod bolts are stock replacements for Gen III and Gen IV LS engines. An important connection in your rotating assembly, your rods need the correct fasteners to hold them together. You can be confident that the fit and strength of BTR connecting rod bolts will do the job.
( 4 )
$2.99
Sealed Power CP-Series Rod Bearings
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$5.99
—
$9.99
Chevrolet Performance Connecting Rod Bolts
What better way to secure your connecting rods than with genuine Chevrolet Performance bolts? Your rods are an important connection in your rotating assembly--making the fasteners that hold them together even more important. Choose the strength of Chevrolet Performance connecting rod bolts.
( 3 )
$3.99
—
$6.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 289 )
$6.99
—
$9.99
Melling Pushrods
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 78 )
$1.99
—
$9.99
ACDelco GM Genuine Parts Pushrods
ACDelco GM Genuine Parts engine valve pushrods are available for a wide range of vehicles, including many Chevrolet, Cadillac, and GMC models. These steel replacements are designed, engineered, and tested to rigorous standards, all backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the model recommended for your application.
Not Yet Reviewed
$4.99
Sealed Power A-Series Rod Bearings
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$5.99
—
$9.99
Mopar Replacement Pushrods
Mopar Replacement pushrods are genuine OE-replacements. That means your Chrysler, Dodge, Jeep, or Ram will receive the perfect part to repair and/or restore your vehicle's performance and safety, just as it should be.
Not Yet Reviewed
$9.99
BTR One-Piece Pushrods
BTR one-piece pushrods deliver the quality you want for your build. Brian Tooley Racing precision-formed pushrods are constructed from SAE 4130 chromoly tubing, centerless ground to exacting tolerances, and case hardened to Rc 60. These sets are available in several choices of diameter and many options for length.
( 211 )
$9.99
Cam Motion Chromoly Pushrods
Maintain reliable valvetrain operation using a set of these Cam Motion chromoly pushrods. They are manufactured from durable chromoly steel to meet today's engines' higher valve spring pressures and rpm range. The pushrods are available in different diameters and wall thicknesses, so you can choose what's best for your engine's valvetrain configuration.
( 19 )
$8.41
ACDelco GM Genuine Parts Engine Connecting Rod Bolts
ACDelco GM Genuine Parts engine connecting rod bolts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
Not Yet Reviewed
$4.99
COMP Cams High Energy Pushrods
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 244 )
$8.95
—
$9.95
Clevite AL-Series Rod Bearings
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 29 )
$3.99
—
$9.99
Trick Flow® Adjustable Pushrod Length Checker Replacement Cup-Style Ends
Trick Flow® adjustable pushrod length checker cup-style ends can be used to replace lost or damaged ends—or to convert a Trick Flow® ball end-style pushrod length checker to a measuring tool for engines that use cup-style pushrods. The ends are available to fit 5/16 in. and 3/8 in. diameter pushrods.
( 6 )
$7.99
Crown Automotive Connecting Rod Bolts
Engine braking (using one's gears to slow down) puts peak stress on the lower end bolts. Crown Automotive replacement connecting rod bolts are made of sturdy steel and can withstand greater pressures when properly torqued to the correct specs. Quality rod bolts are so crucial in engines that spin, and Crown is an industry leader in superior aftermarket parts.
( 2 )
$4.99
—
$9.99
Melling Performance PRO-Line Pushrods
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 12 )
$8.50
—
$9.99
Tilton Replacement Master Cylinder Pushrods
Tilton replacement master cylinder pushrods are constructed from sturdy steel for several Tilton master cylinder series. They are available in two lengths. Find the one that's right for your application. All pushrod lengths are interchangeable between all Tilton flange mount master cylinder types.
( 1 )
$7.65
Howards Cams Performance Series C1010 Pushrods
Howards Cams Performance Series C1010 pushrods are manufactured from .060 in. wall C1010 low-carbon steel material. They provide over 20 percent more column strength than OEM pushrods. Their advanced design eliminates ball breakage. They are heat-treated for use with guideplates and are designed for up to 500 lbs. of valve spring pressure.
( 59 )
$3.99
—
$8.99
King CA-Series Rod Bearings
Need bearings? See the specialists at King. Their CA-Series rod bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. When it comes to bearings, there is only one King Engine Bearings.
( 4 )
$7.99
—
$8.99
Crown Automotive Pushrods
Pushrods are one of the internal engine parts that can bend or experience metal fatigue over time. Crown Automotive steel replacement rods will help you with maintenance or a complete engine rebuild. These rods are available in a variety of lengths for proper fitment on your application.
( 4 )
$3.99
—
$8.99
Eagle Rod Cap Alignment Sleeves
Eagle rod cap alignment sleeves precisely align the cap of the rod with the beam to ensure a perfect big end bore size and crush, so bearings fit perfectly. They are available individually or in quantities.
Not Yet Reviewed
$7.99
Clearance
Howards Cams Swedged End Pushrods
Howards Cams swedged end pushrods are engineered for maximum strength and durability. Produced from seamless 4130 chromoly aircraft tubing, each tube is through-hardened to a depth of .010 in. to .015 in. These pushrods are mirror-polished to eliminate the possibility of stress fractures and are finished in black oxide. Strong but light, they are well suited for roller applications. These pushrods are packed in a unique protective storage case.
( 73 )
$12.99
$8.50
Manley Pushrods
Manley pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 10 )
$7.22
—
$8.22
