Availability
Summit Racing™ offers valve cover breathers in a variety of styles, sizes, materials, and finishes. They're designed to fit most stock or aftermarket valve covers. Add a dash of flash under the hood; top off your valve covers with snazzy breathers from Summit Racing™.
( 121 )
$6.99
—
$12.99
Summit Racing™ valve cover grommets are designed to control oil leakage into breather caps and keep oil from getting all over your valve covers. The baffled grommets help to eliminate oil blowby, as well. These inexpensive replacements are made to fit most stamped or diecast valve covers. Order the size and style preferred for your application.
( 154 )
$3.99
—
$9.99
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 39 )
$8.99
—
$10.99
Did you lose or damage a valve cover bolt? Chevrolet Performance has you covered with these replacement valve cover bolts. They are just like your factory originals, so you have no worries about fit or appearance--everything will be just how the engineers at Chevy intended. Chevrolet offers these replacement valve cover bolts for most of their popular engines, so finding the right one will be easy.
( 15 )
$6.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 51 )
$1.99
—
$11.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 36 )
$4.99
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$9.46
Allstar Performance valve cover breathers are offered in shielded and non-shielded versions. These aluminum breathers can be used on valve covers with breather tubes.
( 15 )
$10.99
Control what your PCV system allows back into your highly tuned combustion chamber with Keyser Manufacturing valve cover breathers. They prevent less-than combustible byproducts from being recycled into the combustion chamber, causing a buildup of crud on your valves and a less-than-optimal mixture in your combustion chamber. These breathers allow vapors to escape while catching any sludge, preventing it from leaking over your engine block.
( 6 )
$8.99
—
$10.99
Moroso PCV grommets with integral baffles are designed for those using extra-tall valve covers without the integral oil control baffles. The special oil-resistant design keeps oil out of the PCV valve. They'll work with all GM PCV valves and will fit any valve cover with a 1.22 in. diameter hole.
( 20 )
$10.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
Edelbrock oil fill hole plugs are designed to plug the oil fill hole on any of Edelbrock's Signature series or similarly designed valve covers with a 1.25 in. hole. They're made of high-quality material with chrome finish and recessed Edelbrock script logo.
( 19 )
$15.95
Improve your vehicle's performance by replacing your clogged PCV valves with new ones from Beck/Arnley. Clogged PCV valves mean poor performance from your car--poor idling, poor gas mileage, and no power. Beck/Arnley quality replacements provide a perfect fit every time for your vehicle. Check and clean your PCV valves periodically, and when you need to replace, choose Beck/Arnley.
( 24 )
$3.99
—
$18.99
MotoRad crankcase breather caps provide the oil circulation and air ventilation that your engine needs to run properly. Made from heavy-duty steel, MotoRad caps perform well under pressure. Many of these direct fit, high-quality crankcase breather caps are given a zinc plated finish for optimal rust resistance. Get replacements that perform and fit like the originals--MotoRad crankcase breather caps.
( 1 )
$4.99
—
$9.99
Edelbrock PCV valve cover grommets are available for a variety of applications, including dozens of Jeep and American Motors vehicles from the 1960s and '70s. These rubber accessories are ideal and affordable components to complement your V8 intake manifold.
( 6 )
$14.95
Moroso breather grommets with integral baffles are designed for use with valve covers that do not have an oil control baffle system. They are made from oil-resistant rubber and will fit into any valve cover with a 1.22 in. diameter hole, replacing the OEM-style grommets. The built-in baffles provide oil control. Note: These breather grommets will not clear stud girdles.
( 28 )
$11.99
Anchor your valve covers in style! Edelbrock black valve cover hold-down tabs are designed to be used on all Edelbrock Signature series and other similar-design steel valve covers. Available for big and small block Chevy applications, these hold-down tabs add a nice finishing touch to your setup. Order the set designed for your application.
( 12 )
$13.95
Moroso PCV grommets are for the street enthusiast using Moroso valve covers and wishing to install a positive crankcase ventilation system. The grommets work with all GM PCV valves and will fit all valve covers with a 1.22 in. hole.
( 15 )
$10.99
—
$11.99
Trans-Dapt Performance breather grommets help to prevent oil leakage into the valve covers and are designed for use with most breathers. They are available in breather and PCV styles to fit your application needs. Some grommets require their bottoms to be cut before use.
( 16 )
$2.99
—
$4.99
These valve cover spreader bars from Trans-Dapt spread out to hold down pressure and ensure a leakproof fit. They match the rest of your chrome accessories and are available for a wide variety of applications.
( 31 )
$9.99
These chrome plated accessories are perfect for Edelbrock's Signature Series valve covers, or any valve cover with a 1.250 in. breather hole. Edelbrock's high standards for quality will complement your engine compartment's functional beauty.
( 10 )
$13.95
These Spectre valve cover grommet sets can be used to convert twist-in breather cap installations into push-in types and will accept PCV valves. They will fit all types of valve cover applications. The Spectre valve cover grommet sets include one air breather rubber grommet and one PCV rubber grommet. Make installation of your valve cover breathers easy with one of these Spectre valve cover grommet sets.
( 39 )
$6.99
—
$8.99
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$11.95
—
$16.22
$7.77
—
$9.70
Spectre valve cover oil fill caps are designed to be pushed into your standard 1.25 in. valve cover breather hole. They include a rubber grommet and can be installed in just seconds. The caps are available in your choice of steel or aluminum, so you can match up what's best for your engine style.
( 29 )
$8.99
—
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
