Availability
Showing In Stock Items. Show All 124 Items.
Summit Racing™ offers valve cover breathers in a variety of styles, sizes, materials, and finishes. They're designed to fit most stock or aftermarket valve covers. Add a dash of flash under the hood; top off your valve covers with snazzy breathers from Summit Racing™.
( 122 )
$6.99
—
$12.99
Summit Racing™ valve cover grommets are designed to control oil leakage into breather caps and keep oil from getting all over your valve covers. The baffled grommets help to eliminate oil blowby, as well. These inexpensive replacements are made to fit most stamped or diecast valve covers. Order the size and style preferred for your application.
( 157 )
$3.99
—
$9.99
ACDelco Gold PCV valves are high-quality aftermarket components. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These replacements have been manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 39 )
$3.50
—
$8.99
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 41 )
$8.99
—
$10.99
Did you lose or damage a valve cover bolt? Chevrolet Performance has you covered with these replacement valve cover bolts. They are just like your factory originals, so you have no worries about fit or appearance--everything will be just how the engineers at Chevy intended. Chevrolet offers these replacement valve cover bolts for most of their popular engines, so finding the right one will be easy.
( 15 )
$6.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$2.99
—
$9.99
Made from high-quality black rubber, these Proform grommet sets will fit valve covers with 1.22 in. holes. They seal breather caps, oil filler caps, and PCV valves to your valve covers to prevent vacuum leaks and the loss of oil. These kits include two grommets--one for push-in air breathers, and one for PCV valves.
( 23 )
$4.99
—
$7.95
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 37 )
$4.99
Allstar Performance valve cover breathers are offered in shielded and non-shielded versions. These aluminum breathers can be used on valve covers with breather tubes.
( 15 )
$10.99
Moroso PCV grommets with integral baffles are designed for those using extra-tall valve covers without the integral oil control baffles. The special oil-resistant design keeps oil out of the PCV valve. They'll work with all GM PCV valves and will fit any valve cover with a 1.22 in. diameter hole.
( 20 )
$9.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
Trans-Dapt valve cover stud kits make your job easier. These studs assist in keeping the gasket in position during assembly. These kits include studs and serrated locknuts to make your valve cover and gasket installation hassle-free.
( 17 )
$9.99
Trans-Dapt Performance breather grommets help to prevent oil leakage into the valve covers and are designed for use with most breathers. They are available in breather and PCV styles to fit your application needs. Some grommets require their bottoms to be cut before use.
( 17 )
$2.99
—
$4.99
Spectre valve cover oil fill caps are designed to be pushed into your standard 1.25 in. valve cover breather hole. They include a rubber grommet and can be installed in just seconds. The caps are available in your choice of steel or aluminum, so you can match up what's best for your engine style.
( 29 )
$8.99
—
$11.99
These chrome plated accessories are perfect for Edelbrock's Signature Series valve covers, or any valve cover with a 1.250 in. breather hole. Edelbrock's high standards for quality will complement your engine compartment's functional beauty.
( 10 )
$13.95
These valve cover spreader bars from Trans-Dapt spread out to hold down pressure and ensure a leakproof fit. They match the rest of your chrome accessories and are available for a wide variety of applications.
( 31 )
$9.99
Create a positive seal with Chevrolet Performance valve cover grommets. They're precision-made to ensure a secure fit between your valve covers and breather or PCV. Get the right grommets for your GM vehicle from Chevrolet Performance Parts.
( 34 )
$2.99
—
$5.99
Moroso PCV grommets are for the street enthusiast using Moroso valve covers and wishing to install a positive crankcase ventilation system. The grommets work with all GM PCV valves and will fit all valve covers with a 1.22 in. hole.
( 16 )
$10.99
—
$11.99
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$11.05
$6.08
—
$10.03
These oil fill caps from Trans-Dapt are a great looking way to add some class under the hood while topping-off your oil system. They're available in a variety of styles and finishes to suit your needs.
( 16 )
$5.99
—
$6.99
Mr. Gasket baffled breather grommets are designed to virtually eliminate oil breather blowby. No tools are required for installation, as the baffled grommets simply replace the stock grommets. They are made to fit most valve covers that use 1.22 in. O.D. x 1 in. I.D. grommets. These grommets will not work with stud girdles, as they extend 1 1/4 in. into the valve covers.
( 9 )
$7.50
MotoRad produces these oil filler caps for nearly every domestic and import vehicle on the road today. MotoRad is the leading supplier of oil filler caps for both the original equipment market and the automotive aftermarket, ensuring you of a quality product.
( 1 )
$2.99
—
$9.99
Help deter those unwanted leaks with Dorman valve cover grommets. They're manufactured from oil-resistant rubber to be durable against severe heat and fluctuating temperatures under your hood. Plus, their beveled design ensures a secure, airtight seal. Choose the style and size designed for your vehicle application.
( 70 )
$2.99
—
$6.99
If you're looking for a nice set of valve cover hold-downs, than look no further. Proform offers these chrome valve cover hold-downs that definitely add a nice touch to your engine compartment.
( 11 )
$8.99
—
$9.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
