Availability
Showing In Stock Items. Show All 124 Items.
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 41 )
$8.99
—
$10.99
Did you lose or damage a valve cover bolt? Chevrolet Performance has you covered with these replacement valve cover bolts. They are just like your factory originals, so you have no worries about fit or appearance--everything will be just how the engineers at Chevy intended. Chevrolet offers these replacement valve cover bolts for most of their popular engines, so finding the right one will be easy.
( 15 )
$6.99
Moroso PCV grommets with integral baffles are designed for those using extra-tall valve covers without the integral oil control baffles. The special oil-resistant design keeps oil out of the PCV valve. They'll work with all GM PCV valves and will fit any valve cover with a 1.22 in. diameter hole.
( 20 )
$9.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
Trans-Dapt valve cover stud kits make your job easier. These studs assist in keeping the gasket in position during assembly. These kits include studs and serrated locknuts to make your valve cover and gasket installation hassle-free.
( 17 )
$9.99
Spectre valve cover oil fill caps are designed to be pushed into your standard 1.25 in. valve cover breather hole. They include a rubber grommet and can be installed in just seconds. The caps are available in your choice of steel or aluminum, so you can match up what's best for your engine style.
( 29 )
$8.99
—
$11.99
These chrome plated accessories are perfect for Edelbrock's Signature Series valve covers, or any valve cover with a 1.250 in. breather hole. Edelbrock's high standards for quality will complement your engine compartment's functional beauty.
( 10 )
$13.95
Moroso PCV grommets are for the street enthusiast using Moroso valve covers and wishing to install a positive crankcase ventilation system. The grommets work with all GM PCV valves and will fit all valve covers with a 1.22 in. hole.
( 16 )
$10.99
—
$11.99
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$11.05
$6.08
—
$10.03
Trans-Dapt Performance breather grommets help to prevent oil leakage into the valve covers and are designed for use with most breathers. They are available in breather and PCV styles to fit your application needs. Some grommets require their bottoms to be cut before use.
( 17 )
$2.99
—
$4.99
These oil fill caps from Trans-Dapt are a great looking way to add some class under the hood while topping-off your oil system. They're available in a variety of styles and finishes to suit your needs.
( 16 )
$5.99
—
$6.99
Summit Racing™ valve cover grommets are designed to control oil leakage into breather caps and keep oil from getting all over your valve covers. The baffled grommets help to eliminate oil blowby, as well. These inexpensive replacements are made to fit most stamped or diecast valve covers. Order the size and style preferred for your application.
( 157 )
$3.99
—
$9.99
MotoRad produces these oil filler caps for nearly every domestic and import vehicle on the road today. MotoRad is the leading supplier of oil filler caps for both the original equipment market and the automotive aftermarket, ensuring you of a quality product.
( 1 )
$2.99
—
$9.99
Help deter those unwanted leaks with Dorman valve cover grommets. They're manufactured from oil-resistant rubber to be durable against severe heat and fluctuating temperatures under your hood. Plus, their beveled design ensures a secure, airtight seal. Choose the style and size designed for your vehicle application.
( 70 )
$2.99
—
$6.99
If you're looking for a nice set of valve cover hold-downs, than look no further. Proform offers these chrome valve cover hold-downs that definitely add a nice touch to your engine compartment.
( 11 )
$8.99
—
$9.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$2.99
—
$9.99
ACDelco GM Genuine Parts PCV valves are an emission control component. These valves are a GM recommended replacement for your vehicle's original part. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These GM Genuine Parts PCV valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 4 )
$3.99
—
$8.99
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$11.95
—
$16.22
$7.77
—
$9.70
Spectre's T-Bar valve cover hold-downs are made of anodized aluminum and are designed for quick removal and installation of valve covers. These T-bar hold-downs are 3 1/2 in. tall and have 1/4 in.-20 x 1 in. studs.
( 5 )
$10.99
Dorman PCV breather hoses can help maintain engine life and performance. They are direct replacements to keep your vehicle running in top form. Brittle or clogged hoses can cause emission problems. New PCV breather hoses, tubes, and elbows from Dorman are original equipment solutions designed to head off problems and prolong your positive crankcase valve's proper operation. Preserve your PCV system--install new breather hoses from Dorman.
( 27 )
$3.99
—
$7.99
Metro Moulded rocker arm cover plugs are manufactured to meet and exceed OE specifications. These quality neoprene plug reproductions deliver the right fit, function, and form for your vehicle.
( 3 )
$8.99
Billet Specialties offers these valve cover grommets as service replacements for your Billet Specialties valve covers and breathers.
( 9 )
$10.95
Crown Automotive provides a variety of performance parts and accessory hardware for your vehicle, including valve cover fasteners. The hardware is generally the top choice for professional engine builders because of its ability to properly position a gasket and guide the valve cover into place. Each valve cover fastener features the appropriate rolled threads and precise finishing to help ensure proper valve cover sealing which deters unwanted leaks.
Not Yet Reviewed
$5.99
Add a bit of flash and function to your engine with Trans-Dapt Performance chrome valve cover bolts. These OE-quality replacement fasteners are machined from steel for plenty of strength, and chrome plated for great accessory looks under the hood. They're available in a variety of thread sizes, lengths, and hardware quantities. Anchor your valve cover with chrome bolts from Trans-Dapt.
( 33 )
$5.99
—
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
