Availability
On Sale
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). MSD Timing Tapes help you to recognize the importance of the timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
( 125 )
$8.28
$7.45
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 18 )
$11.29
$10.16
On Sale
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 42 )
$11.85
$10.67
On Sale
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$9.46
$8.51
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$8.26
—
$10.03
$7.43
—
$9.03
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$11.95
—
$16.22
$7.77
—
$9.70
On Sale
These bolts are made of a Grade 8 alloy and are heat-treated for extra strength. They feature a high hex head to prevent socket slippage and an extra-thick washer to allow for a more accurate, uniform torque.
( 7 )
$15.07
$9.80
On Sale
Mr. Gasket baffled breather grommets are designed to virtually eliminate oil breather blowby. No tools are required for installation, as the baffled grommets simply replace the stock grommets. They are made to fit most valve covers that use 1.22 in. O.D. x 1 in. I.D. grommets. These grommets will not work with stud girdles, as they extend 1 1/4 in. into the valve covers.
( 9 )
$7.50
$6.75
On Sale
Holley LS coil offset brackets were designed to help clear high-mounted alternators when ignition coils are mounted onto Holley LS/Tall LS valve covers. These service part replacements/add-ons are for Holley LS valve covers with 72mm-spaced coil mounting provisions and 5th generation LS coil bodies only. Each assembly consists of an LS coil offset bracket and two coil mounting bolts (standard M6 x 1.0 threads, 14mm long). Gain that critical one inch (roughly) of clearance space with Holley LS coil offset brackets.
( 3 )
$6.97
$6.27
On Sale
Brighten and freshen up your engine compartment with a Scott Drake oil cap. These Scott Drake oil caps not only look sharp, but they will also keep oil in its place.
( 97 )
$10.43
$9.39
On Sale
These gleaming, chrome-plated, push-on breather/oil filler caps from Mr. Gasket fit over your oil filler tube. They have a side fitting for easy PCV hose hook up.
( 2 )
$12.93
$7.11
On Sale
Holley LS valve cover bolt kits are hardware assemblies developed specifically for Holley tall LS valve covers. Available as a single service component or a full set of eight, each bolt assembly features a polished valve cover bolt (M6 x 1.0 threads), aluminum spacer, and OE-style grommet. If you're dealing with lost or damaged fasteners for your tall LS valve covers, don't fret—order Holley LS valve cover bolt kits.
( 1 )
$11.19
$10.07
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$11.05
$6.08
On Sale
Replace your old oil filler cap with a chrome plated cap from Mr. Gasket. They are available in a variety of attachment styles to suit your needs, and they add a fresh look under the hood.
( 18 )
$11.95
$6.57
On Sale
Why reuse your old dowel pins when you have machine work done on your block? I can't think of a good reason, especially when these Mr. Gasket dowel pins are inexpensive and readily available. They are made from high quality steel, precision machined and case hardened for accurate cylinder head alignment.
( 4 )
$17.19
$9.45
On Sale
These steel valve cover clamps from Mr. Gasket help distribute bolt pressure more evenly, for better sealing. They're available in several styles, and some come with bolts.
( 3 )
$10.29
$9.26
On Sale
Scott Drake reproduction engine oil dipsticks are manufactured from quality materials, ensuring a proper fit and a unique look. Scott Drake offers an extensive line of oil dipsticks, all featuring easy-to-read markings. They're topped with polished stainless steel, chrome finished, or beautiful billet aluminum handles to give your classic's engine bay original appeal or a custom touch.
( 23 )
$18.65
$10.26
On Sale
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 239 )
$8.95
—
$13.95
$8.06
—
$12.56
On Sale
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$7.95
—
$11.95
$7.16
—
$10.76
On Sale
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 228 )
$10.95
—
$14.95
$9.86
—
$13.46
On Sale
COMP Cams rocker arm hold-down bolts are designed to secure your bolt-down, pedestal mounted roller rockers. They are fully rollerized at the roller tip and trunion, and have a black oxide coating applied for corrosion resistance. The bolts are available in different thread sizes and styles, so they're sure to have a set to fit your specific engine combinations.
( 9 )
$6.95
$6.26
On Sale
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 101 )
$6.95
$6.26
On Sale
COMP Cams camshaft bolts are designed to prevent breakage. They are rated at 170,000 psi and are available for most popular applications. These bolts are the perfect items to top-off any camshaft installation.
( 7 )
$9.95
$8.96
On Sale
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 179 )
$9.95
$8.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
