Availability
Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!
Not Yet Reviewed
$19,555.99
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed fuel injected long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * EFI system * Distributor * Valve covers, oil pan, and timing cover * 30-month/50,000-mile warranty
Not Yet Reviewed
$14,349.00
—
$14,499.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$19,749.00
—
$23,049.00
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed carbureted long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Cast iron 454 big block * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness * 4.250 in. stroke, bored .060 in. over * Standard deck Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons, 10.1 to 1 Compression ratio * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * 850 cfm carburetor * Aluminum intake manifold * Valve covers, oil pan * 30-month/50,000-mile warranty * Dyno test results shipped with engine
( 3 )
$13,349.00
—
$13,449.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$23,299.00
—
$26,499.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$21,249.00
BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods * Hypereutectic pistons * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications require a special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$17,999.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$19,049.00
—
$22,449.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and a T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 6-speed Transmission Package: * McLeod Super Street Pro twin-disc clutch * Steel bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) * Torque converter with 2,200–plus rpm stall Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$23,399.00
—
$26,709.00
Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,504.09
—
$19,504.09
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 trans combos. Product description and specifications: Block: * High-strength cast iron (LSX style) * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * Chamber – 69cc * 2.165 in. Intake /1.590 in. Exhaust Valves * 259cc Intake / 102cc Exhaust Runners Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other Components: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water Pump * Engine harness and ECU kit * Injectors and Fuel Rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611) not included. Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ rpm stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$22,049.00
Our Summit Racing™ 1966-72 Mopar B-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, and polyurethane transmission mounts, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Mopar B-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,417.29
—
$19,417.29
Our Summit Racing™ 1970-74 Challenger and Barracuda Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap headers, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Challenger or Barracuda. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,755.24
—
$19,755.24
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 427 c.i.d. 605 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without LS engine controller package with wiring harness and gas pedal. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 605 hp/565 lb.-ft. * Compression ratio: 11:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 in. -- 114-degree lobe separation angle -- 3-bolt cam * Forged steel crankshaft -- 4.125 in. stroke -- 6.125 in. connecting rods * Forged pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0685 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * #42 fuel injectors and returnless fuel rail * Coil packs * Spark plugs and wires * Valve covers * Timing cover
Not Yet Reviewed
$16,049.00
—
$17,049.00
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump
( 1 )
$13,349.00
—
$13,749.00
BluePrint Builder Series 383/436HP Standard Edition carbureted crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a carbureted Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition carbureted crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * External front/rear * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (750 cfm) * Fuel pump * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications are special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$15,899.00
BluePrint Engines GM 400 C.I.D. 508 hp Drop-in-Ready EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines will replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 508 hp/473 lb.-ft. * Cast iron block * 4-bolt main * 4.125 in. bore * Forged crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum cylinder heads--64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * Roller cam * .555 intake/.576 exhaust * 236 intake/242 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, intake manifold dual plane, valve covers, oil pan, timing cover, water pump, spark plugs and wires, distributor, harmonic balancer * 30 month/50,000 mile warranty
( 1 )
$9,449.00
—
$11,399.00
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty
Not Yet Reviewed
$8,999.00
—
$10,999.00
BluePrint Pro Series Chevy LS 376 c.i.d. EFI supercharged deluxe long block crate engines deliver 700 hp and 640 lbs.-ft. of torque. They include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, nodular iron crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, a polished or black finish accessory drive system, and more. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron 6.2L block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Compression ratio: 9.5:1 -- Rotating Assembly: * Forged crankshaft * 3.622 in. stroke * 6.125 in. connecting rods with 150,000 psi bolts * Forged pistons * Internally balanced front and rear -- Cylinder heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc Intake / 102cc exhaust runners -- Cam specs: * Cam type: Hydraulic Roller Cam * .612 intake / .585 exhaust lift * 225 intake / 238 exhaust duration * @.050-113 degree lobe separation -- Also includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Throttle pedal * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.
Not Yet Reviewed
$22,499.00
—
$22,599.00
BluePrint Pro Series Chevy LS 427 ci.d. EFI supercharged deluxe long block crate engines deliver 800 hp and 780 lbs.-ft. of torque. They also include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, forged crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, and a polished or black finish accessory drive system. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers * Compression ratio: 11:1 -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc intake / 102cc exhaust runners -- Cam Specs: * Hydraulic roller * .624 intake / .624 exhaust lift * 239 intake / 255 exhaust duration * At .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration -- Also Includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Magnuson TVS2650 supercharger * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$25,249.00
—
$25,349.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
