Availability
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty
Not Yet Reviewed
$8,999.00
—
$10,999.00
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with exciting performance. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer, fuel pump and feed line, 750 cfm carburetor, and front accessory drive * 30 month/50,000 mile warranty
Not Yet Reviewed
$9,949.00
Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results
( 59 )
$7,949.00
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
Manufacturer Rebate
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
Get the most out of your Ford 4.6L 2V with Trick Flow® Twisted Wedge® top-end engine kits. Each kit is carefully tuned to deliver the right amount of horsepower and torque. Take the time and guesswork out of designing a winning combination and save some hard-earned cash. Twisted Wedge® top-end engine kits for Ford 4.6L 2V are built around a set of dyno-proven Twisted Wedge® cylinder heads with 185cc intake runners and your choice of 38cc or 44cc CNC-profiled and bowl-blended combustion chambers. You also get a hydraulic roller camshaft set, matching followers, lash adjusters, timing chains, a valve spring compressor tool, and intake and head gaskets.
( 3 )
$5,001.75
—
$5,101.75
BluePrint Engines Pro Series Chevy LS 376 c.i.d. 495 hp EFI truck long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared for those wanting maximum horsepower and durability. Features, specs, and contents: * 495 hp, 490 ft.-lb., compression ratio 10.7:1 * Cast Iron block with 6-bolt main * Nodular iron crankshaft * Connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal balanced rotating assembly * BluePrint LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.59 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller cam -- .553 intake/.553 exhaust lift -- 218 intake/224 exhaust duration at .050 -- 113-degree lobe separation, 110ICL * L92 truck intake manifold * Fuel injectors and rail * Truck water pump * Truck harmonic balancer * LS low-profile aluminum oil pan * GM-style smart coil packs * Spark plugs and wires * Valve covers * Oil pump * Dipstick
Not Yet Reviewed
$10,949.00
Callies Ultra billet crankshafts are intended for use in cutting edge applications where durability and innovation are a must. They are machined from premium grade (Para-Pure) Timken alloy steel formulated to create a level of toughness that is unmatched in the crankshaft industry. Each Ultra billet crankshaft is uniquely machined with Callies' Ultra-Shed counterweight profiles. The Ultra-Shed leading edge profile gently moves oil away from the oncoming counterweight while the directional trailing edge directs oil away from the oncoming rod journal. Callies' Aero-Shed super finish will give you a crankshaft that is totally stress-riser free and incredibly aero efficient. When these processes are combined, the result is a crankshaft with the lowest coefficient of drag in the industry. Callies has developed a wide range of part numbers for a variety of popular engines. Choose the Ultra billet crankshaft created for your engine.
Not Yet Reviewed
$5,065.00
—
$7,543.00
BluePrint Builder Series 632/815HP Blackout Reaper crate engine and 4L80E transmission combos take away the hassle of properly pairing a carbureted Chevy Gen VI big block 454 performance engine and 4-speed automatic transmission for your build. These powerful assemblies deliver 815 horsepower and 775 lbs.-ft. of torque with BluePrint aluminum cylinder heads and hydraulic roller camshaft to go with forged pistons, a forged crankshaft, and forged connecting rods. The front accessory drive includes the alternator, power steering pump, A/C compressor, and water pump for the cast iron block which features a tall deck. When you are looking for a new powertrain, go with the authority in crate engines and order your very own BluePrint Builder Series 632/815HP Blackout Reaper crate engine and 4L80E transmission combo. More product features and details include: * Compression ratio of 11.0:1 * Camshaft offers 0.698 in. intake/exhaust lift with 272 intake and 282 exhaust duration at 0.050 in. lift and a 110 LSA * Stroke is 4.750 in. with 6.635 in. long connecting rods * Block is a one-piece rear main seal, 4-bolt main setup with a 4.600 in. bore and mechanical fuel pump provision * Rotating assembly is internally balanced and features H-beam connecting rods * BluePrint PS8012 cylinder heads provide a 119cc combustion chamber, 2.300 in. intake and 1.880 in. exhaust valves, plus 358cc intake/125cc exhaust runners and a 0.300 in. raised exhaust port (compared to OEM casting) * This combo also includes the 1,250 cfm carburetor, electric fuel pump, single plane satin finished aluminum intake manifold, spark plugs/wires, valve covers, Pro Billet distributor, harmonic balancer, thermostat with housing, and an oil pan * Spark plug model BPP7938 NGK 7938 BKR5E (0.750 in. reach, 14mm thread, 5/8 in. hex, plug; gapped to 0.035 in.) * Harmonic balancer is non-weighted Transmission features and details include: * Electronic transmission controller * Lockup capable * Torque converter with 3,800-4,200 rpm advertised stall rating * Flexplate (non-weighted) and starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), and 2.077:1 (reverse) * Builder's responsibility to verify clearances for exhaust routing, shift linkage, steering components, etc. * Low profile front accessory design may require fabrication for power steering hoses, alternator wiring, and any additional fittings Other notes: * Recommended fuel is 91 octane and recommended break-in oil is BPP710 * Initial timing is 10-16 degrees * Total timing is 32-34 degrees by 2,500 rpm * Firing order is 1-8-4-3-6-5-7-2 * Not for EGR * Recommended headers include those made by Ultimate Headers, Hedman Husler race headers, and Sanderson headers
Not Yet Reviewed
$29,999.00
These Crower Ultra Light forged steel crankshafts are precision-machined from premium 4340 NT forgings with ultra-light profiling, pendulum undercutting, center counterweight removal, four lightning holes, and radius edges. The smaller outside diameter quickens throttle response, reduces stress and wear, creates less drag in oil, and increases horsepower and torque. Crower Ultra Light forged steel crankshafts are built to order; please specify the required length and main journal size when ordering.
Not Yet Reviewed
$6,836.99
Edelbrock Victor LS3 Top-End kits deliver the ultimate in high performance for street/strip applications. To get great performance out of any engine, all of the components must work together, and for over 30 years, Edelbrock Total Power Packages have solved the parts-matching puzzle. Now, their dyno-matched component Power Package Top-End kits, will get you the best Edelbrock performance in-one-box, under one part number, with "no guesswork" involved. And all of the performance marks are real results from engine dynamometer tests on factory short blocks. Edelbrock Victor Jr. LS3 Top-End kits feature: * Victor Jr. intake manifold * Victor cylinder heads * Rollin' Thunder hydraulic roller camshafts with aggressive profiles for maximum power while retaining great drivability * MSD Ignition Control Module Installation notes: * Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. * Use RTV sealant to properly seal end seals--DO NOT USE end seals gaskets * Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage * NPT/pipe thread fittings require the use of PTFE tape or paste on threads to ensure proper seal * DO NOT overtighten NPT/pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/pipe thread is a tapered thread.
Not Yet Reviewed
$5,900.95
BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. Both versions are also offered with or without a polished front pulley. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile * Front accessory drive with water pump, A/C compressor, alternator, and power steering pump NOTES: * Not for use in pollution-controlled vehicles. * The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
Not Yet Reviewed
$8,249.00
—
$11,249.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 605 horsepower, this standard edition builder series includes a T56 manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 11.1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and T56 transmission combos. Other product features, items, and specifications: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * 4.0665 in. bore * Priority main oiling * 6-bolt main Rotating Assembly: * Forged crankshaft * Stroke – 4.125 in. * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint cast aluminum PS8015 models * Chamber – 70cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift – 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing: * ECM supplied calibration Assembled T56 6-speed Transmission Package: * McLeod Super Street Pro dual-disc clutch * Steel Bell housing * Billet flywheel * Engine guard * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) Other Components: * MLL-BLS4273KBT56 and MLL-BLS4273KT56 engine/trans combos include front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * LS Swap oil pan, windage tray, pickup screen * BluePrint Engines fuel injectors and rail * Low-profile swap oil pan * DBW throttle body * Throttle pedal, and sensors * GM plastic intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Important Notes: Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning. Engine/Trans Package ships assembled.
Not Yet Reviewed
$24,149.00
—
$26,449.00
BluePrint Engines Pro Series Chevy 427 c.i.d. 605 hp dressed stroker long block crate engines are factory dyno tested with a complete MPFI system. These GM LS compatible performance engines are capable of producing at least 585 hp and 520 lbs.-ft. of torque. The PSLS4278CTFK comes with LS cast aluminum intake, coil packs with spark plugs and wires, retro fit oil pan, water pump, harmonic balancer, all sensors to run the engine, gas pedal, with a polished front pulley kit. -- Description: * Horsepower and torque: 585 hp / 520 lbs.-ft. * Compression ratio: 11:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Forged pistons -- Block: * BluePrint Engines high-strength cast iron (LSX style) block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.0695 in. bore * 6-bolt main * 1-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads - PS8015 * 69cc chamber * 2.165 in. Intake / 1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners -- Cam Specs: * Hydraulic roller * .624 Intake / .624 Exhaust lift * 239 Intake / 255 Exhaust duration * at .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission controller required -- Also Includes: * Drive-by-wire throttle body * BluePrint Engines cast aluminum intake manifold * 42 lb. injectors and returnless fuel rail * Harmonic balancer * Valve covers * Retro fit oil pan * Timing cover * Coil packs * Spark plug and wires * Wiring harness * Gas pedal * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor -- Notes: * This engine requires a non-weighted flex plate/flywheel. * Recommended Fuel: 91 Octane. * The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. * BluePrint Engines recommends a 2200+ RPM stall converter. * Retro fit oil pan will fit most 1955-95 GM front engine, RWD, V8 cars. * Not for use in pollution-controlled vehicles or in dry sump applications. * The included LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for the engine; however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The included ECU is unlocked for further refinement at your local dyno shop if required. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$16,049.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and T56 trans combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a T56 manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications: Block: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 6-bolt main Rotating Assembly: * Nodular Iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint aluminum PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift – 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Assembled 6-speed T56 6-speed Transmission Package: * McLeod Super Street Pro dual-disc clutch * Steel Bell housing * Billet flywheel * Engine guard * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) Other Components: * MLL-BLS3763KBT56 and MLL-BLS3763KT56 include front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * BluePrint Engines fuel injectors and rail * Low-profile swap oil pan * DBW throttle body * Loaded intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF and Dyno calibration are maintained with the above ECU / tuning. Engine/Trans Package Ships assembled.
Not Yet Reviewed
$20,599.00
—
$22,899.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX trans combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a TKX manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX trans combos. Other product features, items, and specifications: Block: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 6-bolt main Rotating Assembly: * Nodular Iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint aluminum PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift – 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Assembled TKX 5-speed Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throw-out bearing * Bell housing * Billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) Other Components: * MLL-BLS3763KBTKX and MLL-BLS3763KTKX include front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * BluePrint Engines fuel injectors and rail * Low-profile swap oil pan * DBW throttle body * Loaded intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF and Dyno calibration are maintained with the above ECU / tuning. Engine/Trans Package Ships assembled.
Not Yet Reviewed
$19,799.00
—
$22,099.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
