Engines & Components - bearings KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

World Products Merlin IV Engine Blocks

World Products has made improvements to virtually every area of the new Merlin IV engine blocks—with the goal of producing the most technologically advanced and best-performing iron BBC block available today! New features include thicker main webs for increased strength and thicker cylinder walls which are nominally .310 in. @ 4.600 in. bore. In addition to the standard BBC 9.800 in. and 10.200 in. deck heights, new heights measuring 9.500 in., 9.850 in. and 10.250 in. are now available. The World Products Merlin IV engine blocks are also available with a 2.120 in. BBC cam journal and standard .842 in. lifter bores, or with a 2.283 in. journal for a 55mm Babbitt cam and .904 in. lifter bores. World Products has added a front oil feed for dry sump systems, and relocated the lifter oil feeds and restrictor provisions to the front of the blocks.

5.0 out of 5 stars ( 3 )

$5,173.48

BluePrint Engines GM 496 C.I.D. 600 HP Stroker Dressed Long Block Crate Engines

BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed long block crate engines with aluminum heads provide reliable high-end performance. They are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 496 c.i.d. stroker dressed crate engines are dyno-tested and the results are shipped with engine . Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * Valve covers, oil pan, and timing cover * Brass freeze plugs * 30-month/50,000-mile warranty

4.0 out of 5 stars ( 1 )

$10,199.00

BluePrint Engines Ford 408 C.I.D. 450 HP Stroker Base Crate Engines

BluePrint Engines offers Ford 408 c.i.d. 450 hp Stroker base crate engines—with or without carburetor, distributor, and intake manifold. Here are the basic features and specs: * Horsepower and torque: 450 hp / 470 lbs.-ft. * Compression ratio: 10.0:1 * Hydraulic roller cam * New cast steel crankshaft * Forged pistons * Forged I-beam 6.200 in. connecting rods * Brand new Blueprint engine block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 4-bolt main * 4.000 in. bored * One-piece rear main seal * Mech fuel pump provision: Yes * 4.000 in. stroke * External 28 oz. balance front and rear -- CYLINDER HEADS: * Aluminum cylinder heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners -- CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration @ .050 - 114 degree lobe separation -- IGNITION TIMING: * 34 degrees total at 3500 rpm -- ALSO INCLUDES: * Oil pan, dipstick, timing cover and valve covers * Dyno tested and shipped with results * Some models also include carburetor, distributor, and intake manifold

5.0 out of 5 stars ( 1 )

$8,099.00

—

$9,099.00

BluePrint Engines Ford 347 C.I.D. 415 HP Dressed Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan

4.5 out of 5 stars ( 8 )

$8,199.00

—

$10,799.00

BluePrint Engines Ford 347 C.I.D. 415 HP Base Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp base stroker long block crate engines. They are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * 10 to 1 compression * Valve covers * Painted oil pan * Brass freeze plugs

2.0 out of 5 stars ( 4 )

$7,499.00

Fleece Performance Freedom Series LTR Aluminum Engine Blocks

Fleece Performance Freedom Series LTR is a premium aluminum Gen V LT standard deck race block designed for high performance applications. Cast from a proprietary 356 T-6 aluminum ingot, the Freedom Series LTR engine blocks are engineered with precision and designed for durability to deliver unmatched strength and compatibility with OEM LT accessories. Reinforced from top to bottom, the blocks are built for maximum performance with added features, like cross bracing in the lifter valley, maximized crankshaft saddle radius, and a 40 percent larger footprint for the main cap contact surface to the skirt wall. Whether you're upgrading for competitive racing or seeking peak performance, the Fleece Performance Freedom Series of engine blocks ensure reliability and excellence in every detail, making them a perfect choice for serious enthusiasts and professionals alike. Features: * Cross-braced lifter valley: -- Provides added structural integrity and individual drain backs for improved reliability * Heavy-duty deck thickness: -- A robust 0.750 in. deck thickness for enhanced durability * Enhanced design: -- Additional stock to the front and rear valley walls for increased strength -- Minimum 0.625 in. skirt wall thickness -- Complete reinforced exoskeleton combined with Hot Isostatic Pressing (HIP) ensures the highest quality casting available * Billet main caps: -- Billet construction ensures stability and precision fitment -- Utilizes 8740 alloy M10 main studs and side bolts along with dowels on the inner studs of the block for superior clamping and reliability -- Exclusive domed main cap design provides maximum crankshaft support * Maximized crankshaft saddle radius: -- Optimized for performance under high-stress conditions * Lightweight: -- Weighs only 120 lbs. with main caps -- Strong yet lightweight solution * Priority oil system: -- Oil rifling provides priority oil feed to critical bottom-end components -- Reduces heat, wear, and risk of failure * Ductile iron sleeves: -- Durable wear-resistant surface with improved shock absorption Engine block is shipped with: * Durabond GMP-9 cam bearings * LTR rear cover, rear cover gasket, and hardware * Plug kit * Precision ground 1018/1020 steel cam thrust plate * Transmission dowel pins * Oil galley barbell plug * Rear main seal

Not Yet Reviewed

$6,750.00

BluePrint Engines GM 383 C.I.D. 410 HP Stoker Dressed Long Blocks with Aluminum Heads

BluePrint Engines GM 383 c.i.d. 410 hp stoker dressed long blocks with aluminum heads are great choices for those who demand a drivable, reliable high performance engine. All small block Chevy 383 rotating assemblies are balanced within 2 grams on a state-of-the-art computerized balancer. In addition, each engine is dyno-tested and is then shipped with a documentation of the engine's high performance power curve. Key features and parts may include: * Handpicked seasoned block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Passenger side dipstick * Drilled and tapped for clutch linkage * BluePrint cast steel crankshaft * OEM-type connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Valve covers * Oil pan and timing cover * HEI distributor * Carburetor * Aluminum intake manifold * BluePrint Engines 30 month/50,000 mile warranty

4.8 out of 5 stars ( 5 )

$7,099.00

Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines

Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system

Not Yet Reviewed

$5,947.99

—

$7,152.99

Ford Performance Parts 427 C.I.D. 535 HP Long Block Crate Engines with Z2-Series Cylinder Heads

Drop a Ford legend reborn into your project and experience the power of Ford Performance Parts 427 c.i.d. 535 hp long block crate engines. Built on Ford's Boss 351 blocks, these American-made engines are designed to provide you with big performance in a small block package, along with great drivability. The iconic 427 c.i.d. displacement, but on a Windsor platform—they offer all the powerplant you want at a price that you'll love! Technical information: * 535 hp at 5,600 rpm * 545 lbs.-ft. of torque at 4,500 rpm * Engine type: 351 based small block Ford * 4.125 in. bore x 4.00 in. stroke * 9.5 in. deck height Boss 351 block * SCAT forged steel crankshaft * SCAT forged steel H-beam connecting rods with ARP bolts * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * Camshaft lift: .594 in. intake/.618 in. exhaust * Camshaft duration at .050 in: 242 degrees intake/248 degrees exhaust * Ford Performance aluminum "Z2" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * PAC 1219X ovate beehive valve springs * 10.5:1 compression ratio (nominal) * Roller rocker arms; 1.65:1 ratio * Ford Performance SFI-approved vibration damper; may require a spacer for pulley alignment * Cast aluminum, black wrinkle finish, Ford Racing script valve covers; fit most non-EFI applications * Steel oil pan with windage tray and scraper; 9-qt. capacity * Premium unleaded fuel recommended * Ignition timing: 32 degrees at 4,000 rpm * 5,600 maximum recommended rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Intake gaskets and pilot bearing included * Standard rotation water pump included * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor not included * MSD distributor recommended (modifications for intake clearance necessary) * Steel distributor gear required * Built with currently available parts * Photo and specifications may vary * Available in front or rear sump configurations

5.0 out of 5 stars ( 2 )

$12,159.09

BluePrint Engines Fuel Injected Ford 408 C.I.D. 450 HP Stroker Engines

BluePrint Engines Fuel Injected Ford 408 c.i.d. Stroker engines are complete long block dressed engine assemblies with EFI. They deliver 450 hp and 470 lbs.-ft. of torque. The engines feature a compression ratio of 9.8:1, aluminum heads, hydraulic roller cam, cast steel crankshaft, and forged pistons. Here are additional specifications: BLOCK: * Hand-picked seasoned block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 2-Bolt Main * 4.000 in. Bored * One-Piece Rear Main Seal * Mech fuel pump provision: Not applicable on "CTF" models ROTATING ASSEMBLY: * New cast steel crankshaft * 4.000 in. stroke * Forged I-Beam 6.200 in. connecting rods * Forged pistons * External 28 oz. balance front and rear CYLINDER HEADS: * BluePrint Aluminum Cylinder Heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration at .050 - 114 degree lobe separation IGNITION TIMING: * 34 degrees total at 3500 rpm ALSO INCLUDES: * Intake manifold * Distributor * EFI system * Oil pan, timing cover and valve covers * Dyno tested and shipped with results WARRANTY: * 30 month / 50,000 mile NOTES: * Not for use in pollution controlled vehicles. * Does not include fuel pump. * Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.

Not Yet Reviewed

$9,799.00

Chevrolet Performance 350 C.I.D. Base Long Block Crate Engines

Chevrolet Performance's 350 c.i.d. base long block crate engines are their most popular choice—because no one else can deliver as much performance for this kind of value. Chevrolet Performance believes that everyone should be able to afford a high-quality GM V8 without going broke. Got a tired, old Chevy that needs a lift? Then these replacement engines are just right for you. Chevrolet Performance 350 base long block engine assemblies start with a 4-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable, while still providing good airflow through the engine.

5.0 out of 5 stars ( 4 )

$5,472.99

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$22,449.00

Chevrolet Performance LSX Bowtie Engine Blocks

Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead

5.0 out of 5 stars ( 1 )

$5,038.95

—

$5,565.20

BluePrint Engines Marine GM 383 C.I.D. 405 HP Base Stroker Long Block Engines with Cast Components

Do you need a replacement engine for your boat? Try one of these BluePrint Engines marine GM 383 c.i.d. 405 hp stoker long block crate engines to get the job done. They feature quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * SCAT cast iron crankshaft * Keith Black hypereutectic pistons * GM heavy beam connecting rods * Hastings moly rings * Balanced rotating assembly * Melling high-volume oil pump * COMP Cams roller lifter camshaft * Heavy-duty double roller timing set Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Brezinski cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Dyno-tested--and shipped with results

1.0 out of 5 stars ( 1 )

$7,499.00

ATK High Performance Ford 347 Stroker 450 HP Stage 3 Long Block Crate Engines

If you don't have the time or means for a build, ATK High Performance Ford 347 Stroker Stage 3 long block crate engines are the answer. They'll help anyone looking for a complete motor with reliable, on-street high performance. These fully-dressed (Stage 3) engines work with power accessories, produce a noticeable idle, and include all the Stage 2 components. They may also add in the following parts (among others): carburetion, filters, and spark system. ATK Ford 347 Stroker 450 hp Stage 3 long block crate engines specs: * 440 lbs.-ft. torque * Seasoned OE roller block * 4.040 x 3.400 bore/stroke * 347 c.i.d. displacement * Nodular iron crankshaft (3.400 in. stroke; one-piece externally balanced; 28 oz.) * 4340 forged I-beam connecting rods (5.400) with ARP bolts * Forged flat-top pistons with four valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 231/235 duration at 0.050, 0.544 in./0.565 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart Pro 1 aluminum cylinder heads with 58cc/195cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. front sump OE oil pan * 430 lbs.

3.0 out of 5 stars ( 2 )

$8,099.99

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,701.99

Chevrolet Performance CPP LT1 6.2L Long Block Crate Engines

Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal

Not Yet Reviewed

$10,641.52

Chevrolet Performance 502 C.I.D. Short Blocks

If you want big block power for your ride but want to have a say in the final product, Chevrolet Performance has the solution. Their 502 c.i.d. short blocks can be configured to deliver all of the muscle you want. The heart of these powerhouses is the same short block that GM uses for their 502 c.i.d., 502 hp bruiser—so you know they can crank out the power. Chevrolet starts with a Gen VI 4-bolt main block with a one-piece rear main seal and priority oiling for the main bearings. To that, they add: an externally balanced, forged crank that's shot-peened and magnafluxed; forged steel "dimple" connecting rods; forged aluminum pistons; a single-roller heavy-duty timing chain set; and a hydraulic roller camshaft. The cam has 0.527 in. of intake lift and 0.544 exhaust lift, with 110 degrees of lobe separation. Duration at 0.050 in. of lift is 224 degrees for the intakes, and 234 for the exhausts. These long blocks come complete with a powdercoated cast aluminum timing cover (will not accommodate double-row chains); aluminum cylinder heads and valve covers; a 6 qt. truck-type oil pan (will not fit Chevelle, Camaro, Nova, or Impala); a 14 in. flexplate; and an 8 in. harmonic balancer.

5.0 out of 5 stars ( 1 )

$7,715.76

ATK High Performance Ford 347 Stroker 450 HP Stage 2 Long Block Crate Engines

Start your build with ATK High Performance Ford 347 Stroker Stage 2 long block crate engines. They'll help anyone looking to complete their build with reliable, on-street high performance. These mid-dressed (Stage 2) engines work with power accessories, produce a noticeable idle, and may include (among other parts) an intake manifold, distributor, water pump, front damper, and flexplate. ATK Ford 347 Stroker 450 hp Stage 2 long block crate engines specs: * 440 lbs.-ft. torque * Seasoned OE roller block * 4.040 x 3.400 bore/stroke * 347 c.i.d. displacement * Nodular iron crankshaft (3.400 in. stroke; one-piece externally balanced; 28 oz.) * 4340 forged I-beam connecting rods (5.400) with ARP bolts * Forged flat-top pistons with four valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 231/235 duration at 0.050, 0.544 in./0.565 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart Pro 1 aluminum cylinder heads with 58cc/195cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. front sump OE oil pan * 375 lbs.

Not Yet Reviewed

$7,364.99

BluePrint Engines Ford 302 C.I.D. 370 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 370 hp dressed long block crate engines feature hand-picked seasoned blocks, align-honed main bearing bore, and cylinders honed on computer-controlled machines to within .0002 straightness/roundness—and sonic tested for thickness. Key features: * 2-bolt main * 1-piece rear main seal * Mechanical fuel pump provision * Upgraded 5.090 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint aluminum cylinder heads with 60cc chambers * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners * Hydraulic roller camshaft: .543 intake/.554 exhaust lift, 218/226 duration at .050 with 112-degree lobe separation * Timing: 10-16 degrees initial, 32-34 total * 600cfm carburetor or Sniper EFI system * Dual plane, satin aluminum intake manifold * Distributor * Valve covers * Timing cover * 50 oz. 6.4 in. diameter harmonic balancer * Dyno test results shipped with engine * Painted Ford blue

Not Yet Reviewed

$8,451.43

Callies Mopar Drag Pak Engine Blocks

A good foundation can make your build a success. Callies Mopar Drag Pak engine blocks are Gen III cast aluminum engine blocks officially licensed by Mopar and produced by Callie's sister company, Energy Manufacturing. Start your build with the right "Energy"—a Mopar Drag Pak engine block. Drag Pak block specs: * 9.25 in. deck height * 6.1 timing drive, No VCT solenoid * .937 keyway lifter bushings, require finish hone * 60mm RB cam bore, bearings not included * Delivered with 4.120 in. bores, require finish honing to 4.125 in. * 4140 q/t billet main caps * 4-bolt M1 and M5, 6-bolt M2 to M4 * 1/2 in. head studs available

Not Yet Reviewed

$10,502.00

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$5,153.99

—

$5,542.99

Callies Mopar Hellephant Engine Blocks

A good foundation can make your build a success. Callies Mopar Hellephant engine blocks are Gen III cast aluminum engine blocks officially licensed by Mopar and produced by Callie's sister company, Energy Manufacturing. Start your build with the right "Energy"—a Mopar Hellephant engine block. Hellephant block specs: * A-355 aluminum * 9.25 in. deck height * 6.2/6.4 timing drive, VCT solenoid * Standard lifter pattern, .842 lifter bores * Standard cam bore, bearings installed * Delivered with 4.120 in. bores, require finish honing to 4.125 in. * 4140 q/t billet main caps * 4-bolt M1 and M5, 6-bolt M2 to M4 * M12 head studs available

Not Yet Reviewed

$9,364.00

Ford Performance Parts 351 Aluminum Windsor Engine Blocks

Ford Performance Parts 351 Aluminum Windsor engine blocks feature cast iron sleeves and are available in 9.2 in. or 9.5 in. deck heights. The 9.2 in. version of Ford's Z351 aluminum Windsor blocks is great for smaller displacement builds without the penalty of a taller deck. Both versions are cast from high strength 356-T6 grade aluminum and use splayed, 4-bolt, steel main caps on number 2-3-4 main bearings. The blocks are user friendly and designed to use conventional Windsor components like cams, timing chains, timing chain covers, oil pans, and oil pumps. With a weight of as little as 106 lbs., they can be nearly 90 lbs. lighter than an iron Ford Performance Parts BOSS 351 block. Additional features include: * 2-bolt main caps on number 1 and 5 main bearings * ARP studs on all inner main caps * ARP bolts on number 2-3-4 splayed outer positions * 4.110-4.115 in. bore as delivered--finish at 4.125 in. * 2.75 in. crankshaft main journal diameter (351C) * 2.9415-2.9425 in. diameter finished main bearing bore * Lifter bores finished 0.8753-0.8768 in. * 2.2032-2.2052 in. diameter cam bearing bores * Use cam bearing PN M-6261-J351 or M-6261-R351 * Wet sump oiling system * Maximum stroke 9.2 in. deck height: 4.000 in. * Maximum stroke 9.5 in. deck height: 4.250 in. * Weight 9.2 in. deck height: 106 lbs. * Weight 9.5 in. deck height: 118 lbs.

4.5 out of 5 stars ( 2 )

$6,509.99

31 Results Found For "bearings"