Availability
Pro-Filer small block Chevy All American cylinder heads have a 23 degree valve angle, providing bolt-on compatibility for stock accessories. They're designed for all-around racing and are offered with 185cc, 195cc, 210cc, 235cc intake ports; 64cc, 68cc, 70cc, or 72cc chambers; and straight or angled spark plug locations. You can order the heads assembled or unassembled for engine builders. End pads are drilled and tapped for accessories, and bronze guides are included to reduce stem wear. Nearly 200 models are available; order the heads with options recommended for your application. Whether you're running on the street, strip, or track, equip your ride with Pro-Filer small block Chevy All American cylinder heads. Additional features: * Revised spark plug location to improve flame travel * Uses gasketed 3/4 in. reach plugs like NGK R5671-7 Series
( 4 )
$775.00
—
$1,075.00
Whether you need high performance for the street, strip, or your boat, it's tough to beat Pro-Filer small block Ford cylinder heads. They're precision-cast from aerospace A356 aluminum alloy for incredible reliability, have a solid rocker boss and revised valve location for a highly stable valvetrain, and use .750 in. raised exhaust ports. These 20 degree valve angle heads have 205cc rectangular precision as-cast intake ports, 63cc CNC-machined heart-shaped combustion chambers, and a 5-angle performance valve job. Manganese bronze valve guides assist in extending valve life, while revised spark plug locations improve flame travel. For greater strength and power, install Pro-Filer Small Block Ford cylinder heads. Additional features: * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder * For 347 c.i.d. and larger engines * Does not include valves, springs, retainers, etc.
( 2 )
$861.86
—
$984.95
Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads raise the performance level over as-cast small block Chevy heads. Their 68cc CNC-machined combustion chambers and 235cc CNC-ported intake runners allow for the use of 2.125 in. O.D. intake valves over 335 cfm of airflow. Each unit is cast from aerospace A356 aluminum alloy and includes improved solid rocker bars for stability, drilled and tapped end pads, and revised spark plug locations for improved flame travel. For all-around performance on land or sea, install Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads. Additional Information: * Bronze guides for reduced stem wear * Available with or without water jackets * For 400+ c.i.d. engines * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder
( 1 )
$886.16
Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 14 )
$874.99
Summit Racing™ Pro LS forged steel crankshafts deliver industry-leading fit, finish, and durability at an affordable price. Order the model recommended for your year/make and engine application. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Core hardened to optimum strength, then tempered to remove stresses * Nitride hardened, which results in less distortion, excellent case depth, and more fatigue life * Profiled counterweights reduce windage * Precision stroke and indexing * Lightening holes are drilled in the rod journals for quicker engine acceleration * Gun-drilled Main Journals for quicker engine acceleration * Each crank is magnetic particle tested to ensure it's free of flaws * Large radius fillets for increased strength, narrowed rod bearings for reduced friction * Straight shot oiling for maximum lubrication just prior to maximum load angle * Maximum journal tolerances of +/- .0001 in. ensure consistent bearing clearance * Micro-polished journals with chamfered oil holes for maximum durability and bearing life * Optimized counterweight placement for reduced twisting at high RPM and ease of balancing * High-quality reluctor rings are installed with precision fixturing * Extra 3/16 in. front keyway for blower cars
( 12 )
$839.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 20 )
$849.99
—
$874.99
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$786.00
—
$1,051.00
Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 15 )
$849.99
—
$899.99
FLOTEK's 290cc big block Chevy cylinder heads with 112cc combustion chambers are recommended for moderate street or street/strip BBCs with displacements up to 509 cu. in. operating at or below 6,500 rpm. It may be necessary to check clearance and slightly modify some domed aftermarket pistons due to the efficient heart-shaped combustion chamber on these heads (most of the newer designed dome profiles will clear). FLOTEK recommends removing material from the piston and not the cylinder head, as the combustion chamber shapes are very critical to flow—altering the cylinder head can unfavorably affect flow and power performance. FLOTEK's medium-sized 290cc oval port cylinder heads are designed for 3/8 in. pushrods with 0.120 in. wall thickness. They're available assembled or bare for a variety of engine applications. NOTE: This item is not sold as a pair; this is a single cylinder head.
( 1 )
$799.00
Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.
( 22 )
$867.95
Transform your LS1 into a powerhouse! Trick Flow® GenX® 220 cylinder heads for GM 5.7L LS1 engines are a great value in performance. The cathedral port heads incorporate features of Trick Flow® fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as their competition ported heads. The special Fast As Cast® runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5 degree valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings and sold individually.
Not Yet Reviewed
$849.99
—
$1,149.99
These H-beam connecting rods are the strongest Scat connecting rods available. These Scat H-beam connecting rods are perfect for supercharged and nitrous applications. These rods incorporate a special doweled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications.
( 41 )
$753.99
—
$990.99
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,106.50
These Edelbrock Performer LT1 cylinder heads are designed for the 1992-97 LT1 engines. They produce approximately 24 hp more than factory-stock LT1 heads, and raise peak power levels by 500 rpm. They work with stock or aftermarket self-aligning roller rocker arms. These Edelbrock Performer LT1 aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 1 )
$1,087.50
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$779.24
—
$816.92
Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section
Not Yet Reviewed
$832.99
—
$980.99
When you need lighter-than-standard-weight crankshafts, check out Compstar mid-weight crankshafts from Callies. These cranks are deep nitride hardened and feature drilled rod journals and profiled counterweights for piston clearance. They have a consistent grind and polish, as well as a precise stroke and index. Better by design, Callies Compstar mid-weight crankshafts offer you competitive pricing without compromising quality.
( 3 )
$854.00
Manley Pro Series crankshafts can make your short block bulletproof. They feature forged 4340 construction and undergo a multi-step heat-treatment process and are then nitrided for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed. Manley Pro Series crankshafts have micro-polished large .125 in. radius journals, gun-drilled mains, and lightened rod journals for weight reduction. The counterweights are fully profiled and they are designed for internal balancing.
( 10 )
$850.17
—
$1,042.34
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
Isky Red-Zone Max Endurance roller lifters are designed to withstand a massive amount of abuse without letting you down. In racing or high performance engines, radical cam profiles and huge spring pressures take their toll on lifters--that's where these Red-Zone lifters come into play. These lifters are designed around Marathon roller bearings that utilize a larger diameter pin and a shock-absorbing race that are able to withstand huge spring pressures and sustained high rpm without prematurely wearing out. Add to that Isky's exclusive full spectrum three-point oiling system that delivers a continuous oil supply to the lifters, and over the nose of the cam, and you end up with one of the toughest and most reliable lifters available. Don't risk the race or your engine to inferior lifters--upgrade to these Isky Red-Zone Maximum Endurance roller lifters!
( 3 )
$779.99
—
$1,084.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$926.99
—
$937.99
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound that you demand, COMP Cams' engineering team proudly introduces the Thumpr Series hydraulic roller cam and lifter kits. They are designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. They're designed to maximize the rough-idling characteristics of the cams, giving you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. They are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits feature a cutting-edge hydraulic roller design that delivers a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 16 )
$816.95
—
$1,190.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 386 )
$759.95
—
$1,083.95
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$867.95
—
$947.95
Modal Header