Engines & Components | Summit Racing

Summit Racing™ Pro LS Connecting Rods

Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers

4.9 out of 5 stars ( 20 )

$699.99

Scat Pro Comp I-Beam Connecting Rods

These Scat I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. Scat Pro Comp I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers, and special hollow dowels with huge 7/16 in. ARP cap screw bolts to greatly increase strength and horsepower capabilities.

4.75 out of 5 stars ( 63 )

$504.99

—

$678.99

Melling Performance Oil Pumps

Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.

4.66 out of 5 stars ( 199 )

$513.99

—

$638.99

Melling Select Billet Aluminum Oil Pumps

If you are serious about building the ultimate wet sump system, then these Melling one-piece billet aluminum oil pumps with their integral screen pickup are the only way to go. These pumps not only eliminate the potential disaster of the oil pump pickup falling off, but they also offer smoother oil flow with less internal drag, resulting in an actual increase of 5 to 6 hp. Melling Select billet aluminum oil pumps will fit in your existing Moroso, Milodon, and Stef's wet sump pans, there is no need to buy a new pan or to modify your old one. Melling Select billet aluminum oil pumps offer the absolute latest in cutting-edge technology. Additional features include: * Billet aluminum housing and cover with anodized hardcoat * Standard or high volume billet spur gears * Multiple pressure settings * Chromoly driveshaft extended into the pump cover for support * Integral pickup screen assembly with stainless steel wire mesh * Robust CNC-manufactured design * Chromoly intermediate shaft, optional pressure relief springs, and instructions

3.0 out of 5 stars ( 2 )

$599.99

—

$650.99

Scat Pro Stock I-Beam Connecting Rods

Scat Pro-Stock I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength-adders found in H-beam designs. They are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, and special hollow dowels with ARP cap screw bolts to greatly increase strength and horsepower capabilities.

4.78 out of 5 stars ( 60 )

$502.99

—

$579.99

Enginetech Remanufactured Crank Kits

Enginetech offers remanufactured crank kits for a variety of Chevrolet, GMC, Saturn, Isuzu, Chrysler, Dodge, Jeep, Mitsubishi, Ford, Ram, Subaru, and Toyota engines from 1982 and up. These engine components include a crankshaft, along with the matching set of main and rod bearings needed to properly install and support it within the engine during a rebuild. Crankshafts convert the pistons' reciprocating motion into rotational motion, which powers the vehicle. These remanufactured models are available in forged steel, nodular iron, or cast iron—in a range of stroke and other options.

Not Yet Reviewed

$504.99

—

$716.99

Callies Street Series Camshafts

Callies Street Series camshafts are high performance camshafts engineered to deliver exceptional results across a wide range of street and street/strip builds, from mild upgrades to aggressive performance combinations. Each camshaft is precision ground from billet steel cores on state of the art CNC equipment and heat treated for outstanding strength and long term durability. Rigorous quality control, including precision measurements and laser scanning, ensures cam lobe geometry is consistent and meets Callies' exacting standards. With profiles ranging from mild naturally aspirated street applications to fully built naturally aspirated, supercharged, and turbocharged setups, the Street Series offers solutions for everything from waking up a stock engine to supporting the most demanding high performance cars and trucks.

Not Yet Reviewed

$501.00

—

$657.00

RaceTec AutoTec Forged Pistons

RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts

5.0 out of 5 stars ( 1 )

$689.00

Instant Rebate

Mahle PowerPak Piston and Ring Kits

Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.

4.95 out of 5 stars ( 22 )

$741.28

Canton Racing Drag Racing Wet Sump Oil Pans

Canton Racing drag racing wet sump oil pans are designed to provide the best oil control and power savings possible for each application. Canton Racing drag racing wet sump oil pans are available in several chassis configurations for all levels of performance from Bracket to Pro Drag, and most are available in steel and aluminum.

3.73 out of 5 stars ( 45 )

$672.00

—

$702.00

March Performance Sport Track Chevy Serpentine Pulley Kits

These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.

3.7 out of 5 stars ( 60 )

$500.99

—

$532.99

Instant Rebate

Mahle PowerPak Plus Piston and Ring Kits

What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.

4.0 out of 5 stars ( 6 )

$743.11

Instant Rebate

Mahle Twisted Wedge® PowerPak Piston Kits

Add race-proven Mahle PowerPak pistons to the bolt-on performance of your Twisted Wedge® cylinder heads for a winning combination of power for your Ford. Specifically designed PowerPak piston kits complement the unique chamber and valve angles of your Trick Flow® Twisted Wedge® Ford cylinder heads. These forged aluminum alloy piston kits feature lightweight slipper skirts, machined crowns, CNC-finished pin bores, low drag ultra-flat rings, German steel pins, and race-proven round wire locks. The pistons are deburred and coated with dry phosphate to protect against micro-welding in the ring grooves and pin galling during initial startup. Piston skirts are given Mahle's proprietary Grafal anti-friction coating for additional performance. With specific pocket location and depths to match your Trick Flow® heads, these assemblies enable the use of aggressive cams, allowing you to pull every last bit of horsepower from this high-powered pair. These PowerPaks are available for all of the most popular flat top and inverted dome applications. Give your Ford an edge to victory with Mahle Twisted Wedge® PowerPak piston kits.

Not Yet Reviewed

$711.40

13 Results Found For "support"