Availability
Showing In Stock Items. Show All 59 Items.
Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.
( 4 )
$634.99
—
$636.99
Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.
( 141 )
$522.95
—
$664.95
Baxter Performance oil filter relocation kits offer a range of benefits that elevate your engine's performance and protection. This innovative combo kit includes the cartridge-to-remote oil filter adapter and the 6-port remote mount. The cartridge-to-remote oil filter adapter allows you to effortlessly relocate your oil filter and convert it into a convenient spin-on oil filter format, featuring 3/4 in.-16 threads. This allows the ability to add an oil cooler not otherwise available for the Pentastar engine and is perfect for supercharged and turbocharged modification or high engine torque conditions that produce high oil temperatures. It also provides greater oil retention in engine and faster oil pressure at startup. The top mounted remote adapter is equipped with Schrader valve for complete oil evacuation of the oil filter and added oil cooling system back to the sump for oil change. It also, backflows oil pump pickup tube screen to dislodge contaminants and debris prior to draining oil pan. The included custom bracket allows you to relocate the oil filter mount to the driver's side of the engine, positioned just above the front differential—this strategic placement enhances both accessibility and maintenance convenience. Key features: * Crafted with precision—constructed from anodized machined aluminum, guaranteeing durability and longevity * Equipped with -10AN male fittings * Addition of Viton® seals ensures a secure and reliable seal—preventing leaks and ensuring peak performance * Custom bracket relocates the oil filter mount to the driver's side of the engine
Not Yet Reviewed
$679.46
Howards Cams Rattler camshafts build solid power and a classic sound while retaining drivability. They feature wider lobe centers and use a more aggressive ramp rate to help with air velocity. Although their design is for high-performance street use, they also work well with a stock torque converter. Howards Cams recommends using their Rattler camshafts with a converter stalling above 1,800 rpm and a set of steeper rear-end gears.
( 25 )
$506.99
—
$516.99
March Performance Ultra Style serpentine systems are designed to convert your standard V-belt pulleys to a single ribbed serpentine belt. The kits are available for Mopar, Chevy, Ford, Oldsmobile, Pontiac, and Buick engines—so they are likely to have your application covered. These systems include billet aluminum pulleys that are clear powdercoated, along with the correct brackets and mounting hardware. March Performance Ultra Style serpentine systems are available with or without power steering to suit your specific vehicle.
( 11 )
$636.99
—
$729.99
March Performance small block Chevy Ultra serpentine conversion kits will make it easy to convert your old V-belt pulleys. They bolt to the front of any 1969 or later small block Chevy heads and are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. The included bracket kits come complete with stainless steel tensioning rods and chromoly rod ends for high performance operation. Required mounting hardware is included and is powdercoated to eliminate polishing in those hard-to-reach places. Matching serpentine pulleys are precision CNC-machined from 6061 T-6 aluminum. These pulleys will not fracture like common cast pulleys because they are hard coated in the high-wear areas on their high water flow ratio pulleys. The street rod ratio increases water flow and fan speed. This helps at critical low-speed driving.
Not Yet Reviewed
$697.99
Cam Motion Street King Stroker LLR Series LS camshafts are designed for maximum street performance and street/strip applications in cars using 402-418 cu. in. LS engines equipped with either cathedral port, LS1-style heads; or LS engines with rectangular port, LS3, L99, or L92-style heads. The options are available for either factory-style intake and high-flow aftermarket long runner intake manifolds; or single-plane and other short runner intake manifolds. The Street King Stroker will have a rough idle and explosive midrange and high-rpm power. These units are designed for the enthusiast who wants the most aggressive camshaft for maximum power from their street-driven stroker engine. Street Kings require intake and exhaust modifications for maximum flow. Headers, high flow exhaust, intake system upgrades, increased stall speed torque converter, and increased rear axle ratios are required to achieve maximum performance. Street King Stroker LLR Series LS camshafts are designed with Cam Motion's renowned smooth cam lobe, providing quiet valvetrain operation and excellent upper rpm stability. These models are offered in Cam Motion's top-of-the-line 8620 camshaft cores.
Not Yet Reviewed
$575.00
All piston engines produce crankshaft torsional vibration. TCI Rattler torsional vibration absorbers counteract those vibrations by using internal rollers that automatically offset the twisting forces and eliminate the root cause of torsional vibration. They are effective for the entire RPM range and extend crankshaft and bearing life while also increasing valvetrain stability. Their design does not utilize viscous fluids and they are lighter than most dampers of the same size and material construction. Rattler vibration absorbers feature steel rollers that fit loosely into a specific number of holes. By using an exact, patented, mathematical relationship, the rollers roll forward during the compression stroke and backward during the power stroke to keep engine speed variation and vibration to a minimum. The rollers are actually centrifugal pendulums that store and release energy back into the crankshaft rather than converting it to heat energy as dampers do. They are not frequency specific, but are based on the number of cylinders or the events per revolution so they are practical for street use, as well as track and drag strip use. Features include: * Standard bolt patterns * Available for internally and externally balanced engines * Etched integral timing marks can't move relative to the crankshaft * Maintains maximum effectiveness at all engine speeds * Virtually no maintenance required * No fluids, elastomers, or friction materials * No pulley or crank trigger shims required * CNC-machined to exact tolerances * SFI 18.1 certified
Not Yet Reviewed
$574.95
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$652.95
S&S Cycle Late Twin Cam Easy Start chain drive camshaft kits offer more performance for less money and more time to enjoy riding. These S&S camshaft kits allow your stock starter to start any engine. Plus, some kits reuse stock components and can be used with stock valve springs. Most Easy Start kits include the cams, gear cover gasket, cam bearings, and instructions. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Late Twin Cam Easy Start chain drive camshaft kits.
Not Yet Reviewed
$540.95
—
$549.95
If you're overhauling an older motorcycle engine or building a lubrication system from scratch, consider the turnkey ease of S&S Cycle oil pump kits. They offer the same width oil supply and return gears as a stock Harley-Davidson® aluminum pump, but these driveshaft gears increase potential oil volume delivery by 25 percent over stock on some engines. S&S pumps are machined with an oil pressure bleed-off passage, relieving pressure build-up on top of the valve to maintain consistent oil pressure. Excess oil is also routed directly to the supply side of the pump to reduce the amount returned to the tank—which means less foaming and cavitation. The kits are available for a variety of bikes, including Big Twin models. S&S Cycle oil pump kits include: * Complete oil pump assembly * Pinion shaft pump drive gear * Oil pump driveshaft gear * Breather gear * Mounting hardware * Fittings and gaskets * Instructions
Not Yet Reviewed
$649.95
Wiseco powersports piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, ATVs, snowmobiles, outboard marine engines, and motorcycles. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with Wiseco powersports piston kits.
( 6 )
$560.97
HardDrive connecting rod assemblies are heavy-duty replacements that meet or exceed OEM specifications. Each assembly includes crank pin and bearings or nut. Select the HardDrive connecting rod designed for your motorcycle.
Not Yet Reviewed
$510.26
Engineered to the highest standards, Feuling Parts race series oil pumps are constructed out of 7075 billet aluminum and high-flow 4140 heat-treated chromoly gearotor gears. They're built to such strict standards and, being made of 7075 billet aluminum, have 50 percent greater strength than 6061 aluminum, with the ability to hold tighter tolerances at high temperatures. These well-engineered pumps can produce 40 percent more pressure than your stock pump and are capable of 60 percent more return volume, to reduce or eliminate blowby and wet sumping. All of these functional improvements add up to a more efficient motor, with cooler temperatures and more hp and torque to the rear wheel. They are available for various models and engine types--find the best fit for your application and get your ride running well-lubricated for that next road trip.
Not Yet Reviewed
$507.95
Biker's Choice rocker boxes top your cylinders with the right fit, function, and value. They're made from quality materials and beautifully finished to add a bit of "curb appeal" to your motorcycle application.
Not Yet Reviewed
$612.99
S&S Cycle Hot Set-Up piston and ring kits include forged pistons, rings, wristpins, and clips. They are available in standard and oversized options for stock or S&S cylinder heads. Select the kit needed for your Big Twin setup.
Not Yet Reviewed
$601.95
S&S Cycle forged piston and ring kits include your rings, piston pin, and circlips. S&S Cycle has many years of experience producing quality pistons for motorcycles. These piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response.
( 1 )
$540.95
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$580.10
$531.35
—
$580.10
Trick Flow® Track Max® hydraulic roller camshafts for big block Mopar engines are designed and dyno-tested to ensure maximum performance. Track Max® camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$520.99
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$773.95
$527.21
—
$743.95
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$726.95
—
$742.95
COMP Cams Xtreme Energy retrofit camshafts are built to take advantage of the latest cam technology—and provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these hydraulic roller tappet cams provide better throttle response, engine vacuum, and top-end horsepower than equivalent cams from other manufacturers. Choose the model and options designed for your engine application.
( 60 )
$549.95
On Sale
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$549.95
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 42 )
$506.95
—
$514.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
