Availability
Showing In Stock Items. Show All 115 Items.
The industry-leading camshaft designers at COMP Cams set out to engineer a camshaft specifically for the requirements of open wheel modified racers. They had to take on the daunting task of building maximum horsepower, while still taking into consideration the tire restrictions, chassis technology, engine combinations, and common rule packages found in open wheel modified racing sanctioning bodies, such as IMCA. The Open Wheel Modified Traction Control Camshaft Series is comprised of 10 solid flat tappet and mechanical roller grinds for small block Chevys. These powerful camshafts are separated into four categories, each of which is optimized for open wheel modified racing. A combination of proven camshaft design technologies and the most innovative and aggressive lobe profiles in the industry has produced camshafts that deliver an extremely wide powerband, pulling hard off the corner and all the way down the straightaway. A further benefit of the broad horsepower curve of these cams is that they minimize tire spin, creating legal traction control. These innovative grinds have been extensively track-tested, and they have been proven to run faster than any camshaft that has ever been tested for this type of racing. COMP Cams OWM T/C Series offers a cam for just about every open wheel modified racer.
Not Yet Reviewed
$574.95
On Sale
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 47 )
$531.95
—
$549.95
COMP Cams computer-controlled cam and lifter kits are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these kits will fit your engine's needs.
( 9 )
$587.95
Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.
( 4 )
$634.99
—
$636.99
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 253 )
$509.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 12 )
$548.95
—
$726.95
Moroso drag/road racing oil pans are made with thick, precision laser-cut steel rails, and feature a 7 quart capacity that moves oil away from your rotating assembly, offering excellent oil control and horsepower savings. The pans' race-proven diamond shape, four trap door assembly, and anti-slosh baffles keep your oil contained in the oil pump pickup area during road and drag racing. Moroso drag/road race oil pans have a billet aluminum adapter with a 1/4 in. NPT sensor port that allows a 13/16th thread Moroso or OEM filter to be mounted in the stock location--no need to run a remote oil filter. These pans use a stock dipstick.
( 40 )
$526.99
—
$622.99
Make your engine rebuild more affordable with Summit Racing™ coated forged pistons! They offer the strength of a forging at a cast piston price. They're forged from 4032 aluminum, an alloy containing silicon—which controls the thermal expansion for tighter piston-to-wall clearances. This unique alloy and design reduces piston wobble, limits noise, improves piston ring seating, and increases the overall life of skirts and pin bores. The special coating on these forged pistons adds extra protection from both skirt scuffing during cold starts or on an overheated engine. These sets are available in dozens of models/options to fit applications from 1967 and up. Summit Racing™ coated forged pistons will meet your engine demands!
( 35 )
$504.99
—
$519.99
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 144 )
$501.13
—
$643.31
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 418 )
$509.99
—
$742.99
Moroso offers a variety of wet sump baffled oil pans for road racing, drag racing, street and strip, and Circle Track applications. They're available for a variety of year/make and engine applications. Control your vital lubricant in extreme driving situations with a replacement or upgrade Moroso wet sump baffled oil pan.
( 23 )
$514.99
—
$723.99
Take your engine's performance to new heights with PRW Elite Series stainless steel full roller rocker arms, are engineered for maximum strength, speed, and precision. They are built for serious racers and performance enthusiasts who demand superior control and durability. Precision engineered with Direct Oil Feed Technology, a tight-fit nose roller axle, and E-Coated stainless steel rocker bodies, this series delivers smoother motion, increased RPM potential, and unmatched long-term reliability under extreme conditions. Features: * Rated up to 1000 lbs. open spring pressure * Direct Oil Feed Technology for enhanced lubrication and performance * 25% narrower roller reduces valve-end mass for higher RPM response * Precision-machined nose roller axle for smooth, friction-free motion * 12-Point polylocks included for secure, hassle-free installation
Not Yet Reviewed
$503.16
—
$580.58
These Manley NexTek valve springs are better-designed valve springs using state-of-the-art machinery for purpose-built racing engines. They're manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature a proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. The Manley NexTek valve springs are smaller diameter and lightweight, allowing engines to rev higher faster. They have an extended tip thickness designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading.
( 4 )
$529.04
—
$647.49
Milodon drag race oil pans ensure an ample supply of lubricant under rapid acceleration. These pans have a full-length louvered windage tray and double trap doors to provide a positive oil control system. This results in consistent oil pressure and significant horsepower output increases. They also feature durable steel construction and a gold iridited finish.
( 18 )
$552.93
—
$709.95
These Summit/Federal Mogul Premium engine rebuild kits will make your performance rebuild easy and inexpensive. Everything you need is in one affordable package. They're available with or without pistons (cast, hypereutectic, or forged, depending on the application), chromoly faced compression rings, and exclusive SS-50 oil control rings, as well as main, cam, and rod bearings. Various oil pump configurations are available, depending on the applications, along with top-quality gaskets and freeze plugs.
( 5 )
$517.78
—
$714.85
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 203 )
$541.95
—
$622.95
Summit Racing™ has combined a race-proven Moroso oil pan with the proper Summit Racing™ oil pump. We even include a pump pickup screen and pump shaft! Get maximum oil control in one convenient package!
( 5 )
$510.95
—
$513.98
Milodon Circle Track oil pans ensure an ample supply of lubricant for left-hand turn applications. They feature durable steel construction and a gold iridited finish. These oil pans were designed for IMCA and hobby stocks. Though they appear stock on the outside, they contain sufficient horizontal baffling to control 100 percent of the oil, allowing for an ample oil supply under all racing conditions. A full-length windage tray is mounted in the oil pans with quarter-turn fasteners for easy removal. A matched pickup is located in the right rear corner position for maximum oil availability.
( 1 )
$639.95
—
$709.95
Milodon 4x4 truck and off-road oil pans are designed for tough trucks and extra-rough terrain. The sump for these pans has been moved to the rear, for better oil control and more front differential clearance in long travel applications. These pans feature full horizontal baffling for oil control, and a large capacity to help control oil temperature. Unlike the competition, Milodon gives you an internal and external finish for corrosion protection. Milodon delivers a tough pan, whether your truck is used for street or full-on off-road racing.
( 30 )
$519.95
Canton Racing drag racing wet sump oil pans are designed to provide the best oil control and power savings possible for each application. Canton Racing drag racing wet sump oil pans are available in several chassis configurations for all levels of performance from Bracket to Pro Drag, and most are available in steel and aluminum.
( 44 )
$518.00
—
$729.00
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$509.99
—
$674.99
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$731.95
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$503.99
—
$747.99
These Summit/Federal Mogul Economy engine rebuild kits will make your performance rebuild easy and inexpensive. Everything you need is in one affordable package: * Cast, hypereutectic, or forged pistons (depending on the application) * Cast iron compression rings and exclusive SS-50 oil control rings * Main, cam, and rod bearings * Various oil pump configurations are available, depending on the applications * Top-quality gaskets * Freeze plugs * Plastigage * Assembly lube
Not Yet Reviewed
$527.92
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
