Filters
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 66 )
$622.99
—
$659.99
Are you looking for affordable high performance for your street machine? Wiseco Pro Tru Street pistons are right up your alley! These forged 4032 aluminum pistons are complete with chromium alloy steel piston pins and Spirolox. Oversized, symmetrical, radiused valve pockets allow for maximum flow around the valves during overlap—and accommodate oversized valves and high-lift cams. Wiseco's proprietary ArmorGlide skirt coating extends piston life, increases horsepower, reduces noise, and offers much tighter dimensional tolerances than typical spray-on coatings. Choose the set designed for your vehicle and engine application. World-class, precision-machined high performance pistons—that's Wiseco value!
( 42 )
$550.99
—
$680.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great 2618 forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$617.99
—
$655.99
Trick Flow® forged pistons are specifically designed to work with Trick Flow® Twisted Wedge® and Track Heat® cylinder heads for Chevrolet and Ford engines. These fully skirted, lightweight pistons are precision-machined from premium 2618 aluminum alloy. They perfectly match the unique chamber and valve angles of the Twisted Wedge® heads, making them ideal for more serious engine buildups.
( 10 )
$714.99
Speed-Pro forged pistons are made from extruded VMS-75 aluminum alloy that's forged under 3,000 tons of pressure to "near-net" shape. After that, they're machined to their final configuration. These pistons offer excellent strength and durability—and are capable of taking the punishment that's dished out on the street and in competition. They're available for a wide variety of applications, including OE replacements and all-out racing engines.
( 71 )
$502.99
—
$689.99
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 19 )
$576.24
—
$871.14
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 67 )
$502.99
—
$699.99
D.S.S. Racing SX-Series forged pistons are the perfect find in your hunt for horsepower! Why? They're American-made, high-quality, lighter than stock, and value-priced! D.S.S. SX forged pistons offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons are more than capable of getting your engine blower, turbo, and nitrous ready! Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons.
( 6 )
$559.95
—
$599.95
ICON pistons have introduced a new forging line: the FHR (Forged Head Relief) Series. This new line features VMS 75 alloy, true arc-style lock rings, broached pinholes, breakthrough oil returns, and 5/64 in. ring packs—all designed to be easy on your wallet! In addition, most flat-top and dish applications are available in an offset pin design, which will help to quiet those street motors. The included piston rings will seal mild to high-compression engines, help to protect against oil blowby, and feature standard ring end gap for an easy installation.
( 3 )
$518.99
—
$711.99
SRP big block Chevy high-compression dome top pistons have a hollow dome design that fits most open chamber STD GM, Dart, and Brodix heads. They're forged from premium 2618 aluminum alloy with CNC-machined domes with radiused valve reliefs that provide optimum flame travel. The pistons include a pin fitting, double Spiro locks, and a wall wrist pin. Their CNC-machined grooves accept 1/16, 1/16, 3/16 rings, which are sold separately. SRP pistons will fit tall decks when used with .400 in. long ends, but will not fit GM Signature Series or Edelbrock cylinder heads. Pin upgrades are available. Dozens of models are available, with bore, stroke, rod length, and style options. Select the set that best suits your vehicle and engine application.
Not Yet Reviewed
$799.99
ICON Pistons FHR (Forged Head Relief) Serie features VMS 75 alloy, true arc-style lock rings, broached pin holes, and breakthrough oil returns—all designed to be easy on your wallet! In addition, most flat-top, dish, and dome styles are available in an offset pin design, which will help to quiet those street motors. Sets with KTM after the product number will include piston rings. ICON FHR Series pistons are offered for a wide variety of specific make/model and engine applications.
( 10 )
$508.99
—
$814.99
Mahle PowerPak Piston Kits and ring kits include forged pistons with steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines.
Not Yet Reviewed
$545.34
—
$871.14
Wiseco RED Series piston kits are available for a wide range of popular domestic V8 platforms—for applications from drag racing to Circle Track. These forged pistons utilize race-engineered design to offer the strength and durability that performance engines need, with precision-machined features to provide a competitive edge. RED Series offers the ultimate balance of performance and value. Order the piston set recommended for your year/make and engine family. Features include: * Engineered, forged and machined from 2618 aluminum for tensile strength needed in performance racing and power adder applications * Dedicated forgings allow for optimized, engine-specific strutted design to maximize strength-to-weight characteristics * ArmorGlide skirt coating reduces operating friction, noise, and skirt and cylinder wear * Horizontal slot oiling in pin bores maintains optimal wrist pin and small-end lubrication, critical for long service life * Accumulator groove helps maintain consistent ring seal and power * Each part number includes premium rings * Available for a variety of engines, such as SBC, LS, Ford Coyote, and more
( 1 )
$799.99
Mahle Motorsports offers GM LSX Combo PowerPak piston and ring kits, designed for high-output, naturally aspirated, power-adder applications. These Combo PowerPak kits offer the best of strength in an all-forged aluminum alloy piston to allow for increased detonation resistance, and a combination valve pocket design that will cover LS1, LS3 and LS7 cylinder heads. Features and benefits of these LSX Combo kits include: * PowerPak pistons are all dual-coated with Phosphate coating to provide the piston's characteristic gray appearance (dry lubricant provides a lubricant film protection in the pin bores and ring grooves) * Each slipper skirt is treated with Grafal; Mahle's proprietary coating to reduce wear, drag, scuffing, friction, and piston noise * If the valve pocket layout is unknown when assembling the short block, these pistons will accommodate an LS1-style cathedral port, LS3-style rectangle port, and also LS7-style cylinder heads * With listings for flat tops, dishes, and domes, these Combo PowerPak piston kits will not lock you into a single configuration, allowing for changes that can be made, as needed * Compression ratios are available from 10:1 and cruise all the way up to 14:1 with bore options ranging from 4.000 in. to 4.185 in.
( 3 )
$762.16
—
$838.28
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 134 )
$502.99
—
$879.99
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$663.00
—
$821.00
You don't need a king's ransom to rule the track. ICON premium forged piston and ring kits deliver high performance racing pistons crafted from high-strength 2618 primary aluminum alloy and matched with performance rings, creating remarkable value-packed kits. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple wound spiral lock rings, and their proprietary diamond-finished skirts. Heavy-duty ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! ICON premium forged pistons and ring kits will help you reign victorious without spending a lot of cash.
( 18 )
$512.99
—
$886.99
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 4 )
$650.66
—
$871.14
These Scat I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. Scat Pro Comp I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers, and special hollow dowels with huge 7/16 in. ARP cap screw bolts to greatly increase strength and horsepower capabilities.
( 59 )
$544.99
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$518.99
—
$884.99
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$504.99
—
$879.99
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 8 )
$559.95
—
$719.95
D.S.S. Racing SX-Series forged pistons and rings are the perfect find in your hunt for horsepower! Why? They're high-quality, lighter than stock, and value-priced! D.S.S. SX forged piston and ring kits offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons and rings are more than capable of getting your engine blower, turbo, and nitrous ready! Kit includes a DSS DM piston ring set featuring ductile moly steel top rings and flex vent oil rings. Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons and rings.
( 4 )
$714.95
—
$754.95
Manley Street Master pistons are made of high quality forged aluminum and provide you with a perfect blend of economy and high performance power. They mimic your OEM design with a 1.22mm offset wrist pin location for smooth and quiet start-ups. They have a perfect ring groove to skirt squareness, pressure balanced grooves, a full banded skirt designed for increased skirt stability, and include 2.5 in. premium chrome moly pins with round wire locks. If you're looking for highly durable and dependable pistons, Manley Street Master pistons are your answer.
( 1 )
$614.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
