Availability
Showing In Stock Items. Show All 57 Items.
Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal to facilitate cylinder head re-torquing. Hardened and parallel-ground washers are included, and they're rated at 170,000 psi.
Not Yet Reviewed
$627.95
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 14 )
$624.99
—
$709.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 21 )
$874.99
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 798 )
$536.99
PROMAXX Performance designed and developed these cylinder heads from the GM 6.5 diesel casting. They are cast iron direct bolt-on replacements for your 6.5L diesel engine. The assembled heads have straight intake bolt holes in the cylinder head, and will typically use a one-piece intake manifold. Order the model recommended for your Chevy or GMC truck.
( 8 )
$538.00
ATK high performance LS3/L92 25cc as cast aluminum cylinder heads are the perfect budget option for your next LS build. These fully assembled heads are capable of making over 600 hp naturally aspirated out of the box and will come loaded with upgraded components. The springs are set up to be used on up to .650 in. lift camshafts. No reason to swap parts on your new heads when running an upgraded cam! -- Features and benefits: * Bronze valve guides * Dual valve springs for .650 in. max lift * CNC-finished faces and bolt holes for extreme accuracy * 355-T6 high density aluminum * Machined for screw in studs and guide plates * All factory components will fit without modification -- Cylinder Head Specifications INTAKE: * Intake Runner Volume (cc): 252 * Intake Port Location: Standard * Intake Valves Included: Yes * Intake Valve Diameter (in): 2.160 in. EXHAUST: * Runner Volume (cc): 78.8 * Exhaust Valve Diameter (in): 1.600 in. * Exhaust Valves Included: Yes * Exhaust Runner: No * Port Shape: Round * Exhaust Port Location: Standard COMBUSTION CHAMBER: * Combustion Chamber Volume (cc): 69.4 * CNC-Machined Combustion Chamber: No VALVE SPECS: * Intake Valve Angle: 12 degrees (3 degrees rolled) * Exhaust Valve Angle: 12 degrees (3 degrees rolled) * Valve Guides Included: Yes * Valve Guide Material: Manganese Bronze * Valve Seats Machined: Yes * Valve Seat Machine Style: 5-Angle * Valve Seat Material: Chrome Nickle * Valve Stem Seals Included: Yes * Valve Stem Seal Style: Viton® Fluoroelastomer SPRINGS: * Valve Springs Included: Yes * Maximum Valve Lift (in): .650 in. * Spring Pressure Open: 370 @ 1.150 * Spring Pressure Closed: 142 @ 1.800 * Outside Diameter of Outer Spring (in): 1.29 in. * Damper Spring Included: Yes * Number of Springs per Valve: Dual * Retainers Included: Yes * Retainer Material: Chromoly Steel * Locks Included: Yes * Lock Style: 7 Degree ROCKER ARMS: * Rocker Arm Studs Included: No * Rocker Arms Included: N/A * Rocker Arm Nut Thread Size (in): 8 x 1.25 * Rocker Arm Nuts Included: No MISC: * Head Style: Assembled * Cylinder Head Material: Aluminum * Cylinder Head Finish: Natural * Spark Plug Style: Standard * Cover Mounting Style: Standard * Steam Holes Drilled: No * Oiling Style: Through Pushrod * Machined for O-Ring: No * Heat Crossover: No * 10mm Accessory Bolt Holes Machined On Ends of Heads
Not Yet Reviewed
$748.99
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$701.50
—
$780.50
Victor and Victor Jr. Series aluminum heads are designed using the latest induction technology for outstanding performance and maximum horsepower. They're ideal for the small block Ford Windsor, and small and big block Chevys. Victor Jr. Series heads are perfect for many types of competition and ultra-high performance street machines. They include threaded inserts (heli-coil) in rocker stud and exhaust manifold bolt holes. They have hardened seats and bronze valve guides for strength and durability, and a minimum 9/16 in. deck thickness and machined valve cover rails provide a more consistent gasket seal. Victor Series heads are a step above the rest, for even greater gains in horsepower. All of these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports, and specially contoured combustion chambers.
( 2 )
$782.50
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$782.50
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$509.99
—
$599.99
Originally introduced in 1987, the latest versions of these Sportsman II heads from World Products continue to be the industry's most popular cast iron cylinder heads. Features include high-flow 200cc RightCast intake runners, Fast-Burn combustion chambers, and your choice of angled or straight spark plug locations. The ports are extra-thick with plenty of room for porting, and the heads are indexed off the chambers to ensure perfect alignment with the cylinders. Other features include universal end pads that'll accept all early and late model accessories, leak-free machined valve cover rails, and the ability to accept both perimeter and center bolt style valve covers. They are available in bare or complete assemblies with stainless steel valves, valve springs, retainers, locks, umbrella-style valve seals, screw-in studs, and pushrod guideplates.
( 4 )
$731.49
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your small block Ford engine or upgrade existing components. ATK High Performance 205cc SBF aluminum cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Steel retainers with 7-degree bead lock keepers * Spark plug dimensions: 14mm x .750 in. with gasket seat * Head bolt diameter: 1/2 in.
Not Yet Reviewed
$698.99
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$501.02
—
$782.96
Cylinder Works 4-stroke cylinder heads typically include cam caps and bolts, C630 (nickel/aluminum/bronze) valve seats and guides. For competition valve jobs, these replacements have shortened guides to accept higher lift cams. For your off-road motorcycle rebuild, a 4-stroke cylinder head kit from Cylinder Works is the place to begin. Order the model recommended for your bike application.
( 3 )
$539.70
Bolt on a set of affordable World Products S/R Torquer heads and add some serious muscle to your small block Chevy—up to 30 horses over stock. The heads are available bare or assembled for a variety of applications. These cast iron heads feature: * Power-building 170cc intake runners * Dual-pattern raised, leak-free valve cover rails * Tapped for screw-in rocker arm studs * 2.02 in. intake/1.60 in. exhaust valves * Umbrella valve seals * 1.250 in. valve springs * 7 degree retainers and locks
( 2 )
$652.16
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your small block Ford engine or upgrade existing components. ATK High Performance 185cc SBF aluminum cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Steel retainers with 7-degree bead lock keepers * Spark plug dimensions: 14mm x .750 in. with gasket seat * Head bolt diameter: 1/2 in.
Not Yet Reviewed
$648.99
Wagner Tuning Pro Series cylinder head stud kits replace the original bolts with high-strength Pro Series 18.8 stud bolts with a tensile strength of 1850 N/mm², and they do not need to be replaced after disassembly, but can be reused. Pro Series bolt threads are formed and not cut as is customary in the trade. By rolling the threads, the strength of the tooth flanks can be increased by around 30 percent. All Pro-Series products are supplied with a nickel coating or a burnished finish and are therefore protected against corrosion in the long term, even under the toughest conditions. Pro Series stud bolts have a hexagon socket drive on the head side for screwing in the stud bolts. Thanks to a cone on the engine block side of the stud, these are not supported on the thread flanks when the nuts are tightened, but in the bore of the thread in the engine block. This support protects the threads during frequent assembly of racing engines. Nuts and washers are included in each set, and they also have a tensile strength of 1850 N/mm². Select the kit designed for your vehicle in the finish you prefer best.
Not Yet Reviewed
$599.00
World Products Windsor Jr. heads feature 180cc intake runners that combine high velocity and superior flow to produce excellent torque and throttle response in stock to mildly modified 5.0L engines. The 58cc combustion chambers are sized for true bolt-on compatibility, and have been "tweaked" to optimize efficiency. Windsor Jr. cast iron cylinder heads provide a very cost-effective solution to getting serious power from a Ford 5.0 motor without spending a ton of money. And when it comes to value, you can't beat the assembly packages from World. Top-grade components are used as your assurance of reliability, with World passing bulk buying advantages right through to their customers.
( 7 )
$772.40
Pro-Filer small block Chevy All American cylinder heads have a 23 degree valve angle, providing bolt-on compatibility for stock accessories. They're designed for all-around racing and are offered with 185cc, 195cc, 210cc, 235cc intake ports; 64cc, 68cc, 70cc, or 72cc chambers; and straight or angled spark plug locations. You can order the heads assembled or unassembled for engine builders. End pads are drilled and tapped for accessories, and bronze guides are included to reduce stem wear. Nearly 200 models are available; order the heads with options recommended for your application. Whether you're running on the street, strip, or track, equip your ride with Pro-Filer small block Chevy All American cylinder heads. Additional features: * Revised spark plug location to improve flame travel * Uses gasketed 3/4 in. reach plugs like NGK R5671-7 Series
( 4 )
$775.00
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$690.80
On Sale
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$780.15
$562.80
—
$702.14
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$549.99
On Sale
AFR 200cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, Melling Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one-piece 8mm 21 4N stainless steel valves. The AFR 200cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.
( 2 )
$789.60
$710.64
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$849.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
