Availability
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 272 )
$50.95
—
$114.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$52.95
—
$110.95
Building a performance street machine? COMP Cams Magnum double row timing sets are built for mild performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double row timing sets are dynamically balanced for smoother operation.
( 113 )
$83.95
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$50.79
—
$114.99
ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.
( 1029 )
$51.99
—
$118.99
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 255 )
$50.99
—
$105.99
PowerBond Premium replacement harmonic balancers offer high-quality for the professional engine rebuilder or shade tree mechanic. Featuring a spheroidal graphite iron casting which is considered near-steel strength material, they use both inserted and pressure-bonded rubber that produces rubber strength that is stronger than competitive balancers. PowerBond Premium replacement harmonic balancers are available for the most popular passenger cars, light commercial trucks, and 4WD applications.
( 208 )
$50.99
—
$114.99
ARP engine bolt kits come in your choice of polished stainless steel or black oxide chromoly steel bolts with 12-point or hex heads. These kits include the bolts and washers for your engine.
( 222 )
$99.99
—
$108.99
ACDelco GM Genuine Parts engine valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For the optimal performance, replace your vehicle's parts with those made by the original manufacturer—ACDelco GM Genuine Parts.
( 1 )
$54.99
—
$62.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 287 )
$50.99
—
$116.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 348 )
$53.99
—
$106.99
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 180 )
$57.95
—
$81.95
Cloyes heavy-duty timing sets supply everything you need from a timing chain—performance and reliability. The cam sprockets are machined from cast iron with billet steel crank sprockets. Cloyes heavy-duty timing sets are available in single or double roller versions and offer .200 in. (for small blocks) or .222 in. (for big blocks) diameter double roller chains. Cloyes heavy-duty timing sets are considered the industry's most reliable workhorses. They're engine- or model-specific; order the set designed for your application.
( 292 )
$50.99
—
$103.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
Canton Racing remote oil filter adapters feature a unique design that permits the two 90 degree inlet and outlet ports to be rotated. This simplifies hose and fitting connections for all applications. They are machined from billet aluminum and come with all necessary hardware and O-ring seals.
( 63 )
$96.44
—
$108.00
On Sale
Summit Racing™ OEM LS valve covers make a great choice to service and maintain your vehicle's LS engine. They are made from premium materials to OEM specifications for proper fit and performance, as well as good looks under the hood. Choose the replacement valve covers for your application.
( 5 )
$59.99
—
$80.99
$57.99
—
$76.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 135 )
$52.99
—
$108.99
BTR Equalizer billet fuel rail kits are designed for use with the Equalizer line of intake manifolds. They're made from the highest quality 6061 billet aluminum, and include steel brackets for the most rigid fitment. The fuel rails are anodized in gloss black with a laser-etched BTR logo and feature -8 AN O-ring boss (ORB) openings on either end. All BTR Equalizer fuel rail kits come with stainless hardware. The kits are available for multiple Chevy small block engine applications from 1997 and up.
( 4 )
$99.99
Jazz up those boring old valve covers with Billet Specialties valve cover breathers. These billet aluminum breathers are designed with performance, longevity, and ease of maintenance in mind. They're available in several eye-catching styles, and have a 2-piece design with a positive O-ring seal that provides easy access to their washable filter. Billet Specialties breathers are available in your choice of regular breathers or those with a standard, replaceable PCV valve.
( 212 )
$52.95
—
$101.95
Proform high-performance gear drive sets offer high-precision timing, eliminating chain stretch. They are machined for noise, easy to install, and fit under stock timing covers.
( 38 )
$100.99
ARP valve cover stud kits will not only assist you with positioning your gaskets, but they will also minimize valve cover deflection, reducing the chance of oil seepage. The kits include studs, nuts, and washers.
( 273 )
$50.99
—
$101.99
Classic Performance offers power steering pump mounting brackets in a variety of styles for short or long water pump styles. They're machined from steel with a protective black finish. Whether you have a stock or Saginaw P Series pump, Classic has a set of universal or application-specific brackets for you.
( 35 )
$58.99
—
$84.99
Crower polylocks for roller-tip, needle-bearing rocker arms are made from high quality, heat treated chromoly steel. These Crower sure lock nuts allow for precise adjustments. They include nuts and Allen head set screws for positive jam nut operation.
( 38 )
$55.99
—
$78.99
Cloyes street true roller timing sets are aimed at the value-driven racer. They have precision-machined, cast iron cam sprockets and induction-hardened, billet steel crank sprockets. The crank sprockets have three keyways for timing adjustment--4 degrees retarded, 4 degrees advanced, and normal. The chains are rugged, double-row types with oversized 0.250 in. rollers that deliver long life and reliability.
( 126 )
$52.99
—
$101.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
