Availability
All of the moving parts under your hood needs hardware to hold them securely in place. That's where ICT Billet steps in. Their line of power steering brackets allow you to mount various types of pumps, working with both serpentine and V-belt pulleys. Crafted from aerospace-grade aluminum, the bracket kits also come with spacers and bolts for proper installation. ICT Billet power steering brackets are available for fitment on a wide range of car and truck makes/models.
( 124 )
$72.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$52.99
—
$103.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$76.99
—
$106.99
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 27 )
$52.99
—
$65.99
Clearance
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$58.99
—
$107.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 315 )
$84.99
—
$92.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$85.99
—
$109.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 217 )
$85.99
ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. They are heat-treated and threads are rolled to provide up to ten times more fatigue strength. This makes them far superior to standard OEM fasteners in terms of durability, and fully capable of handling the extra stress of high-combustion engines.
( 67 )
$89.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$97.99
—
$106.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$59.99
—
$101.99
Continental timing belt tensioners are the highest quality, most reliable, and performance driven on the market. All Continental timing belt tensioners are designed to meet or exceed OEM specifications and stand up to the harshest automotive conditions.
Not Yet Reviewed
$61.99
—
$102.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 35 )
$81.99
Earl's Performance oil cooler block-off plates are billet covers—built with an extra 1/8 in. NPT port that can be used for an oil pressure gauge or a turbo oil supply port. The 1/8 in. port is located on the top to provide extra header clearance. These oil cooler block-off plates are designed to fit most GM LS/LT oil pans. Earl's Performance oil cooler block-off plate feature: * Billet aluminum construction with black anodized finish * Includes block-off plate, O-ring seal (no gasket required), and mounting screws
( 9 )
$56.19
—
$63.15
ICT Billet freeze plug retainer plates keep your cylinder head freeze plugs from blowing out when running turbochargers with high amounts of boost—potentially causing high internal cooling system pressures. Order the model recommended for your year/make and engine application. Product details: * Made aerospace-grade billet aluminum * Compatible with all GM Gen III and IV cylinder heads * Includes four freeze plugs and mounting bolts (enough for both cylinder heads, front and rear) * Install the retainer plates over the top of the existing freeze plugs in your heads. These can be mounted on the front and rear of each cylinder head.
Not Yet Reviewed
$87.99
Comp Cams camshaft gear and lock plate kits will help you upgrade with their 58x LS cam gear, lock plate, and three premium-grade bolts. Chevrolet LS engines are a popular way to power anything with wheels. So if you're planning to add more power to yours (nitrous, a turbocharger, or even a supercharger), you might want to upgrade your 1-bolt camshaft to a 3-bolt design so it can handle the increased power. Take your Chevrolet LS engine to the next level with the Comp Cams camshaft gear and lock plate kit designed to fit your application!
Not Yet Reviewed
$60.95
Total Seal TS1 gapless 2nd street and race piston ring sets are the preferred choice for race engine builders. These ring sets start with a ductile iron top ring, and feature gapless 2nd rings, and 3-piece standard-tension oil rings. The TS1 gapless 2nd street and race piston ring sets are designed for use in all applications, including mild nitrous, boost, turbo, and forced induction applications. From extreme horsepower race engines to powerful stationary engines for industrial use and everything in between, Total Seal can help you to improve the efficiency and durability of your performance engine.
Not Yet Reviewed
$59.83
—
$89.00
Total Seal M2 tool steel top rings are engineered to be tough. Manufactured from the most advanced tool steel, these piston rings feature uniform barrel face profiles for smooth, quick seating. They hold an axial tolerance of .00015 in., are tested to be 100 percent light tight in their respective bore sizes, and are available in gapless and conventional styles with or without Total Seal's proprietary C-69 PVD face coating for additional friction reduction. M2 tool steel top rings are designed for your extreme applications, like Top Fuel, Pro Mod, nitrous or turbo, and similar applications.
Not Yet Reviewed
$70.02
—
$95.48
Total Seal Maxseal gapless top piston ring sets are designed to cut blowby to negligible levels via their gapless ring technology that utilizes a narrow rail to bridge the normal end gap, sealing off the path blowby otherwise would take. Featuring a Maxseal gapless top ring, Napier 2nd ring, and standard-tension oil ring, Total Seal sets are ideal for use in all applications, including mild nitrous, boost, turbo, and forced induction applications. Order the piston ring set to fit your application.
( 1 )
$57.91
—
$78.59
Clearance
Ajusa offers rocker arms for a wide range of applications—including vehicles from Ford, Lexus, Nissan, Chrysler, Dodge, Plymouth, Mercedes-Benz, and Eagle. The steel replacement arms are available in non-roller or roller tip styles for the intake or exhaust position. These rocker arms are made from factory materials and specifications to ensure proper fitment and long-lasting performance. Since 1972; Ajusa has been a leading international manufacturer of gaskets, head bolt sets, lifters, and turbo components. They carry the world's largest range for European and Asian apps worldwide marketplace.
Not Yet Reviewed
$124.99
—
$129.99
$58.50
—
$61.50
JE Pistons HNS hardened nitrous series rings are specially designed for use with turbo and nitrous applications. They have 20 percent more tensile strength than conventional ductile iron top rings. They're available in various heights in both standard and reduced radial widths.
( 2 )
$50.12
—
$58.97
Clearance
Ajusa offers hydraulic lifters for a wide range of applications—including vehicles from Volkswagen, Audi, Dodge, Eagle, Citroen, Peugeot, Dacia, Lada, Nissan, Toyota, Land Rover, MG, Rover, Triumph, Acura©, Ford, Honda©, Hyundai, Isuzu, Kia, Mazda, Mercury, Subaru, Alfa Romeo, Audi, BMW, Chevy, Chrysler, Freightliner, Jaguar, Jeep, Mercedes-Benz, Ram, Mitsubishi, Plymouth, and Lincoln. The lifters are available in hydraulic flat tappet, hydraulic roller, or hydraulic lash adjuster style. These replacements are made from factory materials and specifications to ensure proper fitment and long-lasting performance. Since 1972; Ajusa has been a leading international manufacturer of gaskets, head bolt sets, lifters, and turbo components. They carry the world's largest range for European and Asian apps worldwide marketplace.
Not Yet Reviewed
$116.99
$52.50
—
$63.99
Clearance
Are people not looking twice at your sport compact? Give them more than a little surprise by installing a set of Wiseco sport compact pistons. These pistons are forged from either 4032 or 2168 aluminum alloy and are precisely CNC-machined to their final configuration. Where appropriate, designs incorporate the strength to deal with nitrous, turbos, or blowers. Chromoly wrist pins and Spirolox retainers are included. Order the size designed for fitment on your vehicle.
Not Yet Reviewed
$195.99
$79.50
Clearance
These small block Chevy 350/400 inverted dome top pistons by SRP are made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. The ring land and crown thickness have been specifically engineered for mild turbo, supercharged, and nitrous applications. Their forced pin oiler provides increased wrist pin lubrication. A pin fitting, double Spiro locks, and a wall wrist pin are included. The CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings, which are sold separately.
Not Yet Reviewed
$149.99
$69.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
