Availability
Showing In Stock Items. Show All 95 Items.
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$68.99
—
$113.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 114 )
$50.99
—
$139.99
Moroso oil filter block-off plates are designed for use with the Moroso dry sump oiling system or external oil pump. They are drilled and tapped to accept a 1/2 in. NPT fitting to provide increased clearance for installing an input pressure line. Mounting hardware and O-rings are included.
Not Yet Reviewed
$85.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 180 )
$58.99
—
$74.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 115 )
$51.99
—
$102.99
Camshaft bearings have a relatively easy life compared to other bearings, but they too, eventually need to be replaced. Get Crown Automotive camshaft bearings if they're scored, showing copper, out of spec, or you want all-new parts. They're designed and manufactured to OEM specs for excellent fitment, dependability, and correct sizing.
( 1 )
$59.99
—
$77.99
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$54.99
—
$79.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$56.99
—
$97.99
Are you doing an engine rebuild? OMIX-ADA main bearings offer the right fit and function to do the job right. They will help reduce the friction between your crankshaft and engine. Get the quality direct-fit main bearings to fit your application from OMIX-ADA.
( 2 )
$89.99
Oil is the lifeblood of your engine, so it deserves a superior reservoir--such as one of these Dorman oil pans. They are constructed of painted stamped steel or natural finish aluminum for long-lasting durability. Each replacement unit is manufactured to OEM specs, ensuring a precise fit that provides an additional layer of efficiency and convenience without any modifications. Leaks, rust, damage, or an engine rebuild are all good reasons to install a new oil pan. Nearly 200 models are available, with various configurations, capacities, and sump styles. Find the Dorman oil pan to fit your car, truck, van, or SUV--and keep the vital lubricants flowing. Oil drain plugs and drain plug gaskets are sold separately.
( 229 )
$51.99
—
$56.99
Jesel camshaft bearings incorporate a lead-based alloy Babbitt material that's applied to a precision centerless ground seamless steel back. This Babbitt material, in conjunction with a dry-film polymer lubricant, protects the bearing surface from damage due to instances such as cold starts, low oil flow, and catastrophic loss of oil pressure. In an effort to reduce oil windage and oil aeration from the camshaft, Jesel offers encapsulated needle-bearing camshaft bearings for a 50 to 70mm cam core. The low friction rollers are designed to operate with a minimal supply of oil. If you will be running a belt drive with this bearing, provisions need to be made to supplement the oil supply to the thrust washers of the belt drive. Order the bearing size needed for your application.
Not Yet Reviewed
$54.00
King introduces the new solution for the aftermarket demand of superior service life and performance in modern engines. The King MC-Series rod bearings were engineered in the wake of ongoing internal combustion engine development—resulting in ever-decreasing minimum oil film thickness values; higher cylinder pressures, temperatures and loads; smaller load carrying bearing surfaces; and lighter components. Additionally, "start/stop" technology produces more frequent mixed lubrication and metal-to-metal contact conditions. The new King MC-Series rod bearings feature a nano-composite polymer coating, known as K-340. It's designed for applying over relatively hard substrates: bronze, aluminum alloys, sputter overlay, and King silver overlay. These bi-metal silicone aluminum sets are available in different sizes for fitment on countless car and truck applications.
Not Yet Reviewed
$91.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$50.99
—
$113.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$56.99
—
$107.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 52 )
$51.99
—
$108.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 7 )
$50.79
—
$114.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$52.99
—
$106.99
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 74 )
$50.99
—
$107.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$56.99
—
$106.99
ACDelco GM Genuine Parts engine valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For the optimal performance, replace your vehicle's parts with those made by the original manufacturer—ACDelco GM Genuine Parts.
( 1 )
$54.99
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$53.99
—
$105.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 45 )
$63.99
—
$85.99
ACDelco GM Genuine Parts oil pump pickups are designed, engineered, and tested to rigorous standards and backed by General Motors. These replacement pickups are true OE parts, delivering the correct fit along with predictable performance. They're available in different styles for hundreds of applications from the 1990s and up. Maintain your GM vehicle with genuine factory parts from ACDelco.
( 5 )
$73.99
If you're building a high-level competition engine, you'll definitely want to consider Speed-Pro Competition Series rod bearings. They were developed in the trenches in NASCAR and Pro Stock competition, so you know they're tough. These bearings are built on premium 1020AK steel backings and overlaid with Speed-Pro's super-duty H-14 alloy. That's covered with a nickel barrier, followed by a thin lead-tin-copper overplate. However, unlike other performance bearings, there is no flash tin layer on top of that. That's because Speed-Pro engineers have determined that such a layer can actually move around under high performance conditions, sometimes resulting in undesirable consequences. Order the set designed for your vehicle and engine application.
( 42 )
$55.99
—
$175.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
