Filters
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 381 )
$56.99
—
$149.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 9 )
$55.95
Summit Racing™ LS Rear main seal housings are the correct housings for all LS models. These aluminum housings are ideal for replacing damaged housings and building a new project from scratch. Summit Racing™ LS rear main seal housings are designed for a correct fit and quality performance.
( 16 )
$50.99
ARP High Performance Series main bolts are rated at 180,000 psi and a popular premium replacement for OEM fasteners. Designed to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 171 )
$53.99
—
$92.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 72 )
$99.99
Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.
( 2 )
$78.74
ARP Pro Series main bolts are application-specific and rated at 190,000 psi. Designed for use in competition engines, as well as to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 13 )
$59.99
—
$102.99
Dial-in your bellhousing alignment to the engine block with Lakewood offset dowel pins. These adjustable pins can correct improper alignment. They're offered in a variety of offsets, lengths, and diameters for nearly a dozen makes, including Chevy, Oldsmobile, Pontiac, Buick, Ford, Lincoln, Mercury, and Mopar models. Stock pins for Ford and GM applications are also available. Lakewood bellhousing dowel pins are simple, affordable keys to aligning the transmission housing with your engine.
( 25 )
$51.59
—
$66.45
Get your 5.0L Coyote buttoned up with one of these Ford Performance Parts engine block hardware kits. They'll have your rotating kit bolted in with the included main cap bolts, and you'll keep the piston temperature under control with the piston cooling nozzles. The kits also include the transmission dowels, front and rear cover dowels, cylinder head dowels, and timing chain guide dowels. Plus, you get one 3/4 in. cup plug, one 13.84mm cup plug, and one 14mm cup plug.
( 1 )
$89.99
The final detail to enhance the appeal of your LS engine--Summit Racing™ LS finned aluminum valley covers. Fabricated from aluminum, they are available with a natural or polished finish, or black powdercoated with machined fin tops for great contrast and looks. The material, finishes, and classic fin design of our Summit® LS intake valley plates offer the ideal touch to dress up your engine area.
( 1 )
$60.99
—
$65.99
Earl's Performance oil cooler block-off plates are billet covers—built with an extra 1/8 in. NPT port that can be used for an oil pressure gauge or a turbo oil supply port. The 1/8 in. port is located on the top to provide extra header clearance. These oil cooler block-off plates are designed to fit most GM LS/LT oil pans. Earl's Performance oil cooler block-off plate feature: * Billet aluminum construction with black anodized finish * Includes block-off plate, O-ring seal (no gasket required), and mounting screws
( 9 )
$54.89
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 13 )
$94.99
—
$103.99
Whether you're looking for more power or simply trying to refresh the motor, there will come a time when you'll need Summit Racing Equipment® LS engine hardware kits. These kits include brass freeze plugs and main cap side bolts for your LS engines. Your rebuilt engine will not be complete without Summit Racing Equipment® LS engine hardware kits.
( 2 )
$57.78
Melling cylinder sleeves are available for a variety of bore sizes to fit all sorts of cylinders. They are great for fixing damaged cylinders. Get your cylinder sleeves from Melling on order today!
( 57 )
$50.99
—
$107.99
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 46 )
$60.99
ARP Powersports engine and accessory bolt kits contain professional-quality fasteners. They're manufactured with premium materials and finishes that are nominally rated at 180,000 psi tensile strength—superior to OEM bolts and better than hardware grades. Motorcycles run at very high rpms and put tremendous stress on lightweight parts. The task is holding your engine and accessories together during those times. ARP Powersports fasteners are a convenient and easy way to assemble your engine with confidence, knowing that ARP is up to the challenge. Choose the kit designed for your specific bike.
( 1 )
$91.99
Replace those worn-out main studs with these main stud kits from Summit Racing™! Our main stud kits contain alloy steel bolts that have been heat-treated to a 180,000 psi tensile strength rating. Summit Racing™ main stud kits are a great choice for high strength and high quality at a value price.
( 7 )
$55.99
—
$79.99
If you've dressed up your engine but there's just something missing, add some style in an unlikely place with a finned cast aluminum valley pan cover from Top Street Performance. The lightweight covers are available in a choice of black and polished finishes. Order the model for your application. Notes: Will fit LS1 and LS6 engines. No knock sensor or displacement on demand provisions.
Not Yet Reviewed
$59.25
—
$69.14
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 7 )
$86.99
When using a remote-mounted water pump, you have to make the connection to the block. The easiest way to do that is with Philadelphia Racing Products AN block adapters. They're CNC-machined from 6061 billet aluminum and anodized for protection and appearance. Each adapter is O-ringed for a tight seal and includes stainless hardware.
Not Yet Reviewed
$64.99
—
$79.99
On Sale
QuickTime offers bellhousing accessories, including these dowel pins, to help you to complete your project. They're made from quality material and are designed to correct the improper register bore alignment of bellhousing to your engine crankshaft center line.
( 4 )
$70.75
—
$72.49
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$51.95
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$67.95
—
$107.99
House your rear main seals in genuine Chevrolet Performance retainers. These aluminum retainers are the perfect replacements for your Chevy, offering the best fit and function. For proper sealing and leak prevention, always choose the originals and rest assured your rear main seal retainers will provide long-lasting Chevrolet performance.
( 1 )
$70.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
