Filters
Summit Bucks
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$64.99
—
$107.99
Summit Bucks
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 51 )
$50.99
—
$107.99
Summit Bucks
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 5 )
$50.79
—
$114.99
Summit Bucks
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 275 )
$50.99
—
$107.99
Summit Bucks
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 248 )
$50.99
—
$107.99
Summit Bucks
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 9 )
$50.99
—
$105.99
Summit Bucks
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$52.99
—
$109.99
Summit Bucks
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 171 )
$50.99
—
$105.99
Summit Bucks
Mahle Original timing chain kits are OE quality replacements in an aftermarket box. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and double roller. Order the kit designed for fitment on your specific model or engine application.
( 3 )
$51.99
—
$112.99
Summit Bucks
COMP Cams Hi-Tech Roller Race timing sets are designed for extreme racing applications. They feature double-row chains with oversized rollers for extra strength and reliability, plus crank sprockets with three keyways. These three choices allow you to set cam timing at normal, 4 degrees advanced, or 4 degrees retarded. Hi-Tech Roller Race sets are dynamically balanced for smoother, more accurate operation, with less fluctuation.
( 44 )
$79.95
—
$116.95
Summit Bucks
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 10 )
$50.99
—
$105.99
Summit Bucks
Mishimoto oil filter adapters are designed to allow you to install an aftermarket oil cooler on your engine. They are manufactured from quality materials and available in a variety of configurations and styles to fit the specific oil system you are working on.
( 6 )
$66.95
—
$79.95
Summit Bucks
Mahle Original oil pump screen assemblies are an integral part of your engine's oiling system. They're manufactured to meet or exceed OEM standards to fit your vehicle without issue. The assemblies are available with a variety of tube diameters and pickup installation methods—such as bolt-in, press-fit, and screw-in. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$52.99
—
$64.99
Summit Bucks
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 31 )
$50.99
—
$102.99
Summit Bucks
ACL Duraglide main bearing sets provide improved load-carrying capabilities and durability for higher horsepower engines. Although they are slightly different in composition than the ACL's Race Series, Duraglide bearings have all the advantages that come with tri-metal bearings. The high-quality copper, lead, and tin construction allow them to perform where OE bearings can't, making them perfect for muscle cars, street rods, or any other high horsepower engine builds. Select the set sized for your re-build application.
Not Yet Reviewed
$72.99
Summit Bucks
ACL Performance offers cam bearing sets for a wide range of vehicles from 1955 and up. The high performance tri-metal engine bearings are designed to withstand higher RPM conditions. Each direct-fit replacement bearing features a high-strength overlay plate with reduced thickness for improved fatigue properties. Oder the set recommended for your year/make and engine application. Additional details: *Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil film * 3/4 in. grooved main bearings GROOVED MAIN BEARINGS to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts
( 1 )
$67.99
—
$95.99
Summit Bucks
Mahle has you covered for all your oiling system needs. Mahle Original oil pumps meet or exceed OEM standards for quality and function. They are available in stock pressure and volume, as well as high-pressure and high-volume for select applications. Mahle Original oil pumps are available for a variety of domestic and foreign car and truck applications.
( 3 )
$52.99
—
$112.99
Summit Bucks
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
Not Yet Reviewed
$60.99
—
$79.99
Summit Bucks
Mahle Original pump shaft sleeves are designed to add stability to oil pump driveshafts. They're factory-style replacements that meet or exceed all OE specifications. Mahle manufactures their shaft guides from premium materials to obtain the best in reliability and performance. Order the model recommended for your engine application.
( 3 )
$51.99
Summit Bucks
Clevite G-Series bearings feature a tri-metal construction--a soft lead-alloy outer layer, a copper-lead center, and a rugged steel backing. They will withstand the friction, dirt, misalignment, wear, corrosion, and heat that chew away at bearing and journal life. Shouldn't they be in your engine?
Not Yet Reviewed
$52.99
—
$105.99
Summit Bucks
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$50.99
—
$107.99
Summit Bucks
Your D.I.D Racing Chain cam chains are ready to be tested by you! You'll be able to run your ride without fear because D.I.D's engineers are continuously improving their chain designs in order to handle the tremendous horsepower loads of today's high performance engines. When you want to replace your cam chain, replace it with a proven winner. Install D.I.D Racing Chain cam chains on your ride and get aggressive without fear!
( 1 )
$55.99
—
$88.97
Summit Bucks
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 26 )
$50.99
—
$105.99
Summit Bucks
As much time, energy, and money as we invest in our vehicles, it makes sense to care for them properly and perform as much preventative maintenance as possible. Mishimoto -AN inline pre-filters offer a simple way to add an extra filtration stage for your transmission, differential, or engine oil pump system. Available in popular -AN sizes from 6 AN to 12 AN, these units are compact enough to fit in cramped engine bays and are highly effective at removing contaminants. A 150-micron sintered bronze internal filter removes contaminants from lubricating fluids, and an integrated rare-earth magnet ensures any metallic debris is captured before entry into the pump. These two filtration stages help extend the life of your fluid pump and associated components. Plus, these pre-filters are precision designed for minimal pressure drop, ensuring ample fluid flow. Mishimoto inline pre-filters have a sleek, durable, corrosion-resistant anodized finish, and are designed to be completely serviceable, allowing for easy disassembly and cleaning or complete filter replacement. Select the size needed.
Not Yet Reviewed
$59.95
—
$61.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
