Availability
On Sale
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 151 )
$102.95
—
$130.95
$92.66
—
$117.86
On Sale
Building a really high performance street vehicle? COMP Cams Magnum double roller timing sets are built for maximum performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double roller timing sets are dynamically balanced for smoother operation.
( 237 )
$102.95
—
$114.95
$92.66
—
$103.46
On Sale
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 219 )
$106.95
—
$117.95
$96.26
—
$106.16
On Sale
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$102.95
$92.66
On Sale
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 168 )
$101.95
—
$117.95
$91.76
—
$106.16
On Sale
Trail-Gear alternator brackets allow you to upgrade your power and secure it properly to your motor with no major modifications. These TG brackets are designed to bolt a GM-style one-wire alternator to your 20R, 22R or 22RE motor, and will work with your stock alternator belt. Made from heavy-duty steel, the brackets will work with many GM-style alternators. Say goodbye to your small, underpowered OEM Toyota alternator; bolt on the ample power needed with the strength and fit of Trail-Gear brackets.
( 13 )
$102.09
$76.57
On Sale
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 322 )
$108.95
—
$120.95
$98.06
—
$108.86
On Sale
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. When ultimate strength is required, as with high-rpm roller cam applications, Hi-Tech Race studs are just what you need. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. All COMP Cams Hi-Tech studs have generous radii and feature a black oxide finish.
( 23 )
$118.95
$107.06
On Sale
COMP Cams Hi-Tech Roller Race timing sets are designed for extreme racing applications. They feature double-row chains with oversized rollers for extra strength and reliability, plus crank sprockets with three keyways. These three choices allow you to set cam timing at normal, 4 degrees advanced, or 4 degrees retarded. Hi-Tech Roller Race sets are dynamically balanced for smoother, more accurate operation, with less fluctuation.
( 44 )
$109.95
—
$118.95
$98.96
—
$107.06
On Sale
COMP Cams gear drive sets are precision-constructed from aluminum, steel, or fiber materials. They're quality-tested for strict tolerances and timing accuracy.
( 15 )
$102.95
—
$135.95
$92.66
—
$122.36
On Sale
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 85 )
$191.95
$105.95
On Sale
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 237 )
$110.95
—
$112.95
$99.86
—
$101.66
On Sale
The latest technology in racing engines includes larger diameter cam journals and needle bearings. COMP Cams now offers these sometimes hard-to-find bearings in complete sets or as individual bearings. Not only will these bearings decrease friction, but they will also hold oil control much more closely. These bearings are steel jacketed and encapsulated for ease of installation.
( 3 )
$119.95
$107.96
On Sale
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 288 )
$116.95
$105.26
On Sale
Featuring precision tolerances and superior final machining, COMP Cams Sportsman stainless steel valves offer outstanding performance and durability for high-rpm, high-horsepower engines. They are manufactured from 21-4N high-strength, one-piece stainless steel. They also feature a chrome polished stem, hardened tips, and high-flow underhead for minimum flow restriction. Recommended for hydraulic, mechanical, or roller lifter camshaft cylinder heads, COMP Cams Sportsman stainless steel valves provide you with the reliability and performance that you require.
( 7 )
$111.95
—
$123.95
$100.76
—
$111.56
On Sale
Trail-Gear offers power steering pulleys in a variety of configurations in universal and vehicle-specific applications. The 4- and 6-groove replacements are machined from aluminum and anodized for looks and protection. Select the size and style you need.
( 6 )
$72.82
$54.62
On Sale
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$109.95
$98.96
On Sale
Edelbrock's valve spring retainers are made of superior-quality steel, and are machined and heat-treated for strength. They have a black oxide finish for rust and corrosion protection. And when matched with Edelbrock's valve stem lock kits and valve springs, Edelbrock valve spring retainers will give you the reliable valvetrain performance you need for your street rod, daily driver, or competition vehicle.
( 9 )
$100.95
—
$113.95
$90.86
—
$102.56
On Sale
Trail-Gear Rock Assault ram pump brackets allow for easier mounting. These sturdy brackets with bolts will secure your steering pump on 20r, 22r, and 3.0L motors. Order the model that's compatible with your vehicle application.
( 1 )
$74.62
—
$97.45
$55.96
—
$73.09
On Sale
These COMP Cams Pro Magnum hydraulic lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper positioning of the internal piston as the lifter inevitably "pumps up." This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 38 )
$118.95
—
$130.95
$107.06
—
$117.86
On Sale
These COMP Cams belt drive replacement components are designed for use in the ultimate in cam timing systems. These components provide competition engine builders with the most accurate valvetrain replacement components available today. COMP Cams has all of the parts you'll need, from cam gear bolts to shims, washers, gears, and more.
( 10 )
$110.95
—
$114.95
$99.86
—
$103.46
On Sale
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 448 )
$119.95
—
$131.95
$107.96
—
$118.76
On Sale
Edelbrock offers E-Series head bolt kits to install one set of cylinder heads. Each bolt kit includes the necessary bolts and washers for your application. E-Series bolts have a yield tensile strength of 190,000 psi for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. These cylinder head bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock "E" stamped into the hex head. Order the E-Series head bolt kit designed for your application needs.
( 4 )
$111.95
—
$113.95
$100.76
—
$102.56
On Sale
Your D.I.D Racing Chain cam chains are ready to be tested by you! You'll be able to run your ride without fear because D.I.D's engineers are continuously improving their chain designs in order to handle the tremendous horsepower loads of today's high performance engines. When you want to replace your cam chain, replace it with a proven winner. Install D.I.D Racing Chain cam chains on your ride and get aggressive without fear!
( 1 )
$55.99
—
$88.97
$51.51
—
$80.07
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
