Availability
Showing In Stock Items. Show All 25 Items.
PowerBond Race performance harmonic balancers bring the advantages of bonded balancers to high-revving and high-horsepower street/race applications where an SFI-approved balancer is required. They have been tested beyond 21,000 rpm without failure, and every balancer features a precision CNC-machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring. They are very light and in most cases, they are only marginally heavier than the original cast iron balancer. The steel inertia ring on the Race Series models is positively protected against forward and backward movement. PowerBond uses our Race Series high-pressure, low-cure that features a natural rubber developed in our laboratory. Every model has easy to read computer etched timing marks and meet SFI specification 18.1.
( 98 )
$251.99
—
$416.99
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$281.95
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 235 )
$282.50
—
$498.90
If you're looking for a cost-effective camshaft solution to delete that pesky DOD—Chevrolet Performance stock replacement non-DOD camshafts are the answer. They're designed to work with OEM valve springs/pushrods in the DOD-equipped Gen 4 trucks. These OEM camshafts are standard equipment on non-DOD 5.3L trucks. Since they come as a single-bolt style, new timing gear won't be necessary. Just swap cams and additional DOD delete parts (sold separately) and you're ready to roll! A fairly stock truck shouldn't require dyno tuning; however, the DOD system must be disabled in ECU for proper functionality. It is advised to consult with your tuner for more information. Order the model recommended for your year/make and engine application. Additional features include: * Hydraulic roller tappet cam * Single-bolt camshaft gear attachment * Computer-controlled compatible * This is the camshaft only (other components sold separately)
( 18 )
$357.99
These Pioneer race balancers bring the advantages of bonded rubber to high-revving race and street/race applications where an SFI-approved balancer is required. Each balancer features a precision CNC-machined AUSI 1045 steel center bonded to an equally strong steel inertia ring. The advanced design makes these balancers very lightweight for all-steel products. The steel inertia ring on these models is positively protected against forward and backward movement and has the added assurance of bonded rubber to eliminate spinning. Every Pioneer race balancer features easy-to-read, computer-etched timing marks.
( 50 )
$316.99
—
$568.99
These COMP Cams Xtreme 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 kit for you. By using an aggressive lobe profile, these cams provide better throttle response and more mid and top-end horsepower.
( 14 )
$416.95
—
$559.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$439.95
—
$570.95
On Sale
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$579.95
$463.96
Summit Racing™ Pro LS Automotive cams are affordable and designed in stages with very specific cam timing for each individual application in cathedral and rectangle port versions. This ensures maximum performance and gives you the idle you are looking for. The lobes are designed for stability at high rpm with the spring pressures found in quality .600 and .670 in. spring packs. Careful design guarantees the cams can be installed with minimal difficulty. Although piston to valve clearance should always be verified, the Stage 2 and 3 cams often allow for additional cylinder head milling. The Stage 4 cams often require no changes but can be degreed slightly different as needed. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for unmatched quality.
( 24 )
$349.99
Summit Racing™ Pro LS Turbo cams are affordable and specifically designed to optimize cam timing with turbochargers. The lobes are stable up to 7,000-plus rpm with the exhaust lobes opening softly against high cylinder pressure for reduced stress on the valvetrain. Overlap has also been reduced in order to prevent reversion, which is typically seen with higher turbine inlet pressures. They come in distinct stages that give you the idle, spool, and power characteristics that match your engine and turbocharger. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for unmatched quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available quality spring packs.
( 8 )
$319.99
—
$349.99
Summit Racing™ Pro LS Single Plane cams are affordable and designed for racing applications where a carburetor and open exhaust are commonly found. These cams have slightly narrower lobe separation to increase torque and compliment short runner intakes. They come in distinct cam timing increments to give you maximum control over the power band. They're also designed with longevity in mind by taking stress off the valvetrain. These lobes remain stable to over 7,000 rpm with a common .600 and .670 lift dual spring kits.
( 21 )
$299.99
Keeping the valvetrain under control is vital to a successful engine program. Callies LS hydraulic roller camshafts feature lobe profiles designed to produce excellent power without sacrificing durability. They are precision ground using Landis CNC grinders, with event timing and lobe profile tolerances verified in Callies ADCOLE inspection gages. With a long history of superior quality grinding experience, Callies is the right choice for all your camshaft needs. Select the LS hydraulic roller camshaft with the specs to meet your build's needs.
Not Yet Reviewed
$423.00
On Sale
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
$487.76
—
$541.95
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$320.99
—
$332.99
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$457.94
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$276.99
—
$359.99
On Sale
COMP Cams XFI RPM high-lift cams have been designed to increase horsepower and extend the rpm range of your engine. Made for applications where a high-lift is necessary, these cams have the power to help you meet your performance goals.
( 3 )
$541.95
$433.56
—
$487.76
BTR camshafts are designed for excellent performance and great drivability. Brian Tooley Racing offers a large number of camshafts and combinations to fit many applications for trucks and cars. Numerous grinds for turbo, supercharged, and naturally aspirated combinations are available for your project, all backed by years of experience, knowledge, and a passion for power.
( 14 )
$389.99
COMP Cams Xtreme fuel injection cam and lifter kits are designed for late model applications, muscle, sports cars, trucks, and more. Ground using faster-opening and more efficient ramp profiles, the kits include a matched set of COMP Cams High Energy lifters to maximize efficiency. If you're working with fuel injection, get the most power out of your engine with COMP Cams Xtreme fuel injection cam and lifter kits. Order the model tailored for your vehicle and engine specs.
( 8 )
$419.95
Howards Cams hydraulic roller camshafts are offered in a wide variety of profiles, from mild to wild. These units are precision-ground from race-quality cores, in-house, on dedicated cam-grinding machines. Each Howards Cams hydraulic roller camshaft is manufactured to the highest quality standards. Order the model designed for your vehicle and engine application.
( 30 )
$414.99
—
$429.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
