Availability
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$299.99
—
$374.99
$269.99
—
$337.49
KB Performance V-Twin piston and ring kits bring all of the knowledge and experience of a legendary engine builder to the world of high performance motorcycles. These pistons use the latest manufacturing techniques and standards to ensure quality and maximum available performance. The kits are offered in hypereutectic 390 alloy and forged 4032 low-expansion alloy. KB Performance V-Twin piston and ring kits are available for Harley-Davidson® and Indian motorcycles in a variety of engine sizes and compression ratios.
( 19 )
$251.99
Milodon external oil systems allow for the bypassing of irregular and restrictive stock internal oil passages. They also allow for the placement of the pickup in an optimum position, plus the use of free-flowing braided line. These kits are available with static or swivel pickups with single or dual lines, and with oil pumps with different levels of output. They provide the optimum in oiling for all types of competition and come complete with all necessary bolts, fittings, O-rings, etc., for installation. A Milodon oil pan, windage tray and oil pump drive shaft will complete the package. In some cases, notching the frame is required.
( 4 )
$414.95
—
$479.95
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 799 )
$259.99
Summit Racing™ Pro Series stainless rocker arms will pay big dividends in performance! The arms are machined from premium-quality material to provide high yield strength and resist deflection, as well as extraordinary fatigue resistance. They feature full complement friction-reducing needle bearings—and incorporate an exceptional design that provides plenty of clearance for higher open valve spring pressures. Each rocker body includes polished top lines and is carefully assembled and inspected to provide the finest rocker arms available in today's racing and high performance industry. Order the set with size and ratio recommended for your engine application.
( 36 )
$314.99
—
$357.99
A car with thumping, high performance idle is sure to grab your attention. COMP Cams is bringing the muscle car sound back, and it's nastier than ever with their Big Mutha' Thumpr hydraulic flat tappet cam and lifter kits. With the meanest sound in the Thumpr line, Big Mutha' street/strip kits produce a very rough idle. And you can rest assured that the aggressive muscle car attitude of your Thumpr-equipped car will be backed up by proven horsepower performance. The kts include camshaft, a set of matched lifters, assembly lube, decals, and instructions.
( 15 )
$390.95
BTR V2 Series camshafts are designed for excellent performance and drivability. The V2 is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment. The maximum heat treatment depth is achieved by using cam cores made within a few thousandths of final grind size. Numerous grinds for turbo, supercharged, and naturally aspirated engines are available for your project—all backed by years of experience, knowledge, and a passion for power. BTR V2 Series camshaft features include: * Revised camshaft center lines for increased average torque * Engine dyno verified to produce more power * Each "stage" has a specific cam core * Maximum heat treatment penetration
( 2 )
$389.99
—
$409.99
Improved Racing set out to design the best air-oil separating catch cans specifically for the factory supercharged vehicles. Focused on three simple design goals: maximized efficiency, durability, and ease of use, the development of the CCS oil catch cans happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters. The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85 to 90 percent. For comparison, none of the competitor's catch cans tested showed a peak efficiency of more than 60 percent. The CCS oil catch cans are durable, made from high-quality, reliable components and, as with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions. Keep contaminants out of your intake to increase octane and keep your engine clean with Improved Racing CCS oil catch can kits. Select the kit specifically designed for your application needs. Product details: * The CCS features tangential entry port for cyclonic separation for maximized efficiency—separates as much vapor from crankcase blow-by fumes as possible with minimal restriction * Other features include stainless steel filter with multiple filter seals, primary seal, bell mouth exit plenum, anti-splash-back funnel with spiral drain groves, and 7.0 fluid oz. or 3.5 fluid oz. reservoir * Quick-turn, easy to service reservoir * Includes mounting bracket and custom made, emissions friendly, quick-connect lines—designed specifically for factory supercharged vehicles * CNC-machined aluminum bracket locks into position every 22.5 degrees—allows for different mounting options specific per the make and model vehicle to offset catch can from engine to clear larger engine covers, evap lines, etc. * Optional drain kit (sold separately) is available to allow for remote draining without removing the catch can—because engine bay fitment is tight on specific vehicles * Fast and flexible mounting bracket system for installation/removal and positioning—tool-free bracket nut can be removed without tools, or snug it down with 5/8 in. wrench * No sight glass needed—just push-up and twist a 1/8th turn to remove the reservoir and look inside, no more fumbling, or endless unscrewing to remove the reservoir * A powerful wave spring keeps the reservoir locked in place—included positive safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed
( 2 )
$299.00
—
$349.00
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 19 )
$251.99
—
$489.99
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$260.99
—
$443.99
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$603.95
$258.95
—
$448.95
Howards Cams and PAC Racing joined forces to engineer Pacaloy mechanical roller valve springs—a premium line designed for high-impact and endurance race applications. Machined from proprietary high-tensile steel, these coils offer a 550 lb. spring rate and will deliver the highest quality performance you can expect from valve springs. Equip your ride with a set of Pacaloys.
Not Yet Reviewed
$312.99
—
$474.99
Mopar Replacement camshafts are a genuine direct fit into every application. No modifications are necessary, as they are the only identical OE replacement. Pick a make/model, select the engine, and your valve train will be firing as the day it came off the assembly line!
( 12 )
$316.50
—
$422.99
RESTOPARTS® Supplied harmonic balancers are original-style parts manufactured to OEM specifications for the proper fit and function in your classic. These factory-correct replacements may feature thick rubber linings between steel center hub and outer rings. RESTOPARTS® also offers 2-piece SFI-tested balancers with heat-treated hubs, hub to damper bolts, and the crankshaft woodruff key. RESTOPARTS® Supplied harmonic balancers are available for different applications. Order the model designed for your vehicle and engine size.
Not Yet Reviewed
$311.99
COMP Cams is proud to offer the finest stud girdles on the market. These stud girdles will tie your studs together, as well as keep them in line.
( 24 )
$289.95
—
$432.95
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$253.99
—
$312.99
Isky hydraulic flat tappet cam and lifter kits are designed for performance-minded car owners who want to use their everyday cars for the street and drags. They produce more power and rpm in road-driven cars, while giving you the power and torque needed to get off the line quickly at the strip. Made from the finest high-quality proferal cast iron billets, these hydraulic flat tappet cams are flame-hardened, super-finished, and Parko Lubrite coated for a long life. Order the model recommended for your vehicle and engine application.
( 19 )
$456.99
—
$499.99
Milodon billet aluminum oil pump covers feature a one-piece design that requires no gaskets or O-rings for installation. They are CNC-machined from billet 6061 aircraft aluminum and then anodized for protection. These covers are available in two styles--one for Hemi-type motor mounts and one for Wedge-type motor mounts. The Milodon billet aluminum oil pump covers are designed for use with external oil pickup line systems.
( 9 )
$254.95
—
$424.95
All of the moving parts under your hood needs hardware to hold them securely in place. That's where ICT Billet steps in. Their line of power steering brackets allow you to mount various types of pumps, working with both serpentine and V-belt pulleys. Crafted from aerospace-grade aluminum, the bracket kits also come with spacers and bolts for proper installation. ICT Billet power steering brackets are available for fitment on a wide range of car and truck makes/models.
( 124 )
$289.99
Peterson Fluid Systems 400 Series filters provide the best filtering available for fuel or oil. Features include an anodized billet body and caps for durability and resistance to fluid corrosion; a stainless steel mesh element for corrosion resistance; and a pleated element for high flow. They are available in -8 thru -20 AN inlet/outlet sizes, as well as a line of accessory end caps to facilitate the use of temperature probes, accessory oiling and fuel return lines. Filter element choices include 45, 60, 75 and 100 micron stainless or 10/20 micron cellulose, with or without bypass.
Not Yet Reviewed
$254.99
—
$324.99
Choose your dry sump oil tank from the pros at Canton Racing. Their selection now includes not only their universal tanks featuring 3-stage de-aeration baffling, but also a sprint-style tank with 4-stage de-areation baffling. All are fabricated from .100 in. thick aluminum, pressure tested, and TIG welded to deliver lightweight yet strong tanks with less possibility of leaks and cracks. Canton Racing focuses on accuracy and reliability to create better quality dry sump oil tanks. Other features of Canton Racing dry sump tanks: * 10 qt. capacities * Spiral runner for oil return * Large fill cap * Integral brackets allow for easy and secure mounting * 1 1/16-12 female bungs for feed and return lines * 1/2-20 drain port with magnetic drain plug * 1/2 in. NPT vent port
( 2 )
$383.00
Since Isky is the world's largest camshaft maker--and one of the most innovative--it stands to reason that they make a good oval track cam. Their oval track hydraulic flat tappet cams are manufactured from the highest quality materials, using Isky's famous craftsmanship to ensure you of a long cam life. You can depend on Isky to provide the horsepower and torque that you need to get off the line and on your way to the winner's circle.
( 11 )
$279.99
—
$376.99
Manley offers AP Premium piston rings from Total Seal to complement their line of Platinum pistons. These AP Premium steel top ring sets deliver superior sealing and maximum horsepower. They incorporate Total Seal's unique and proprietary Advanced Profiling manufacturing, making them ideal for high-horsepower and forced induction/nitrous applications. Order the Manley Total Seal AP Premium piston rings in the application you need.
Not Yet Reviewed
$285.56
—
$380.71
On Sale
COMP Cams Nitrous HP camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 12 )
$549.95
$288.95
—
$439.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
