Availability
Showing In Stock Items. Show All 45 Items.
On Sale
Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.
Not Yet Reviewed
$426.76
$405.42
ATI Super Damper harmonic balancer shells are specifically designed for high-rpm engines. Their proven elastomer is engineered and tuned to eliminate damaging crankshaft harmonics that cause parasitic horsepower loss. These damper shells are built to all-but-eliminate worn parts and timing problems. These are the shells only and must be used with an ATI hub, which is sold separately. Order the model recommended for your vehicle application.
( 17 )
$326.31
Summit Racing™ Performance 4340 forged steel connecting rods come in a variety of applications and options. From a light rod street-strip cruiser to a beefy rod for a 1500 hp big block, you will find just the rod for your combination. As always, Summit Racing™ connecting rods are packed with great features at the best prices. Options and features: * Chevy, Ford, Chrysler, and Pontiac * Big and small blocks * Multiple lengths * H-beams and I-beams * Through-bolts to cap-screws * Press-fit to full-floating * Multiple grades of rod bolts from 8740 through L-19
( 38 )
$319.99
—
$524.99
PowerBond Race performance harmonic balancers bring the advantages of bonded balancers to high-revving and high-horsepower street/race applications where an SFI-approved balancer is required. They have been tested beyond 21,000 rpm without failure, and every balancer features a precision CNC-machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring. They are very light and in most cases, they are only marginally heavier than the original cast iron balancer. The steel inertia ring on the Race Series models is positively protected against forward and backward movement. PowerBond uses our Race Series high-pressure, low-cure that features a natural rubber developed in our laboratory. Every model has easy to read computer etched timing marks and meet SFI specification 18.1.
( 98 )
$251.99
—
$416.99
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 15 )
$288.99
—
$299.99
Summit Racing™ Pro LS Race valve covers are designed for maximum effort applications. They are built tall to clear all types of rocker arm systems including adjustable shaft mounts. Made from cast aluminum for light weight and strength, they include -12 AN vent/ fill locations for catch can or vacuum pump plumbing and utilize built-in baffles to resist oil consumption through the vent or PCV. The valve covers are available in various colors and versions, with or without coil brackets. Select the Summit Racing™ Pro LS Race valve covers for your application needs. Features and benefits: * Available in black, red, or bare aluminum * Special profile clears shaft rockers * Oil fill cap and -12 AN plug included * Available plain and with coil mounts * Uses stock bolts and grommets (not included) * Uses stock gaskets (not included)
( 1 )
$269.99
Clearance
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$524.99
$251.99
—
$581.99
Tune your camshaft timing with COMP Cams adjustable cam gear sets. Your 2 and 4-valve engines have the capacity to make horsepower, but the factory timing gear setup can keep you from accomplishing your goals. COMP Cams adjustable cam gear sets provide up to 12 degrees of camshaft advance or retard, install just like the original factory gears, and work with OE timing chains. The sets feature both a steel hub and a steel outer gear for heightened durability and light weight. The ability to adjust the cam timing is important when your performance engine modifications are completed. Get the most from your engine with COMP Cams adjustable cam gear sets.
( 6 )
$341.95
These American Made titanium retainers from Howards Cams are the ultimate in light weight and strength. When you upgrade from steel to titanium valve spring retainers, you gain speed and power due to the lighter weight and higher strength of titanium. They feature special 6AL 4V titanium manufactured to precise tolerances for maximum strength and durability and are up to 50 percent lighter than steel retainers.
( 1 )
$279.99
—
$289.99
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 69 )
$250.99
—
$472.99
PowerBond Premium replacement harmonic balancers offer high-quality for the professional engine rebuilder or shade tree mechanic. Featuring a spheroidal graphite iron casting which is considered near-steel strength material, they use both inserted and pressure-bonded rubber that produces rubber strength that is stronger than competitive balancers. PowerBond Premium replacement harmonic balancers are available for the most popular passenger cars, light commercial trucks, and 4WD applications.
( 211 )
$316.99
ICON FHR Series pistons for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. ICON FHR pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ring land. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 6 )
$328.50
—
$569.99
Peterson Fluid Systems breather cans feature aluminum construction for light weight. They're fully baffled to keep the oil in—while allowing air to escape. These oil "catch cans" are available in different sizes to work with most applications.
( 1 )
$359.99
ICON FHR Series piston and ring sets for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. Completing these kits are file-fit ring sets that allow custom ring gaps for your specific application, and they are built to handle the abuse of stock street or forced induction to nitrous applications. ICON FHR Series pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ringland. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 1 )
$476.99
—
$517.99
COMP Cams's XD-A pushrods offer a game-changing method for accurately setting lash or pre-load while using non-adjustable-style rockers. These patent-pending pushrods incorporate a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. Proven to 9,000-plus rpm in solid roller LS applications, the system provides a 90 percent increase in bending stiffness for enhanced valvetrain stability. It also allows for lightening of a rocker arm system by 30-plus grams on the backside by removing the adjuster and required support area for threads and seating. The use of lighter rockers with XD-A adjustable pushrods allow higher rpm to be achieved by creating a much more dynamically stable valvetrain system. COMP Cam XD-A pushrods are designed especially for engines with low-mass rocker arms and a light valvetrain with drop-in fitment in LS engines. They can be adjusted over a range of .172 in. in .004 in. increments with shims. Choose the pushrods with the adjustment range needed for your setup.
Not Yet Reviewed
$276.95
Quality you can see, power you can feel—Vertex Replica piston kits are choice replacements for precision performance. Available in 2- and 4-stroke, the Replica piston kits feature both cast and forged manufacturing processes, supplying the highest quality to meet your needs. And, Vertex offers A, B, C, and D sizes, so you can choose the proper fit for your cylinder. The difference in the sizes is 0.01mm (0.0004 in.) increments, with A being the smallest and D the biggest. Vertex Replica piston kit notes: * 2-stroke piston kits are gravity cast aluminum alloy with 18 percent silicone content, which produces an extremely light but very strong piston * 4-stroke pistons are forged from 2618 or 3032 alloys for superior strength and durability * All pistons are heat-treated with a T-5 hardening and tempering cycle * All piston skirts are treated with a high-tech molybdenum disulfide (MOS2) coating for faster break-in time and increased piston life * Standard pistons and rings are OEM replacements * Kits include piston, rings, wrist pin, and circlips
Not Yet Reviewed
$252.86
—
$273.56
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$365.99
—
$547.99
Dualoy cast pistons are designed for diesel and medium-duty gas engines. They're cast from aluminum and machined in-house to maintain the highest level of quality and consistency. The diesel applications feature an iron ring insert in the top ring groove designed to accept the Keystone-style top ring. Dualoy piston sets are available for most popular diesel light or medium-duty truck applications and engine codes.
Not Yet Reviewed
$455.99
—
$531.99
Vertex offers Big Bore piston kits for a variety of applications, including Kawasaki off-road bikes from the 1990s and up. All pistons are heat-treated with a T-5 hardening and tempering cycle, and all piston skirts are coated with a high-tech molybdenum disulphite coating for faster break-in time and increased piston life. Cast piston kits are gravity cast aluminum alloy (not forged) with 18 percent silicone content—which produces an extremely light but very strong piston. Forged pistons are forged from 2618 aluminum for superior strength and durability. Forged high-compression pistons improve power and torque across the entire RPM range. Big Bore pistons increase engine displacement, torque, and peak horsepower. Forged Replica pistons are forged OE replacements. Replica pistons and all rings are OEM replacements.
Not Yet Reviewed
$252.41
—
$296.06
On Sale
Manley TensileMax steel valve spring retainers are designed for serious engine builders. They're as light as standard titanium retainers and within 2 to 4 grams of lightweight titanium versions. The tough alloy retainers are specially heat-treated to provide a hardness of Rc 52-54 and prevent retainer wear. Manley's exclusive process yields a part that delivers optimum balance between ultimate strength, fatigue strength, hardness, and ductility. A unique impingement process developed specifically for the TensileMax alloy and hardness range improves fatigue strength and promotes better oiling between the engine valve spring and retainer. They are available in a variety of sizes, individually or in larger sets.
Not Yet Reviewed
$471.12
$447.56
On Sale
Complementing your Jimny front bumper should be Low Range Off-Road's Jimny rear bumper, offering the next level in aesthetics and performance. Thoughtfully designed to absorb impact, and protect your vehicle from damage both on and off the trail, these rear bumpers are made from 3/16 in. laser-cut steel. Featuring bolt-on installation, they require no welding and include a 2 in. receiver (not rated for towing) and taillights. LROR's Jimny rear bumpers are available in bare steel or with a durable black powdercoat finish. Choose your favorite.
Not Yet Reviewed
$458.85
$390.02
Vertex GP Racers Choice Piston kits include piston, rings, wrist pin, and circlips. The GP Racer's Choice pistons have T-box forgings, unique shaped dome profiles, surface treatments, and increased compression ratios to produce more power, strength, and durability. All pistons are heat-treated with a T-5 or T-6 hardening and tempering. All piston skirts are coated with a high-tech Molybdenum Disulphite coating for faster break-in time and increased piston life. The forged pistons are forged from 2618 aluminum for superior strength and durability—and improve power and torque across entire rpm range. The cast piston kits are gravity cast aluminum alloy (not forged) with 18 percent silicone content, which produces an extremely light but very strong piston, while Big Bore pistons increase engines displacement, torque, and peak horsepower. Forged replica pistons are forged OE replacements. Replica pistons and all rings are OEM replacements. Select the kit for your application needs.
Not Yet Reviewed
$252.41
—
$317.66
One of the best ways to develop more power is to rev your engine higher. Trick Flow® titanium valve spring retainers will help you lighten your valvetrain so that you can safely and reliably get those revs. They're made from light-but-strong titanium and are available for either double or triple springs.
( 2 )
$288.99
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 334 )
$259.99
—
$405.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
