Filters
Make your engine rebuild more affordable with Summit Racing™ coated forged pistons! They offer the strength of a forging at a cast piston price. They're forged from 4032 aluminum, an alloy containing silicon—which controls the thermal expansion for tighter piston-to-wall clearances. This unique alloy and design reduces piston wobble, limits noise, improves piston ring seating, and increases the overall life of skirts and pin bores. The special coating on these forged pistons adds extra protection from both skirt scuffing during cold starts or on an overheated engine. These sets are available in dozens of models/options to fit applications from 1967 and up. Summit Racing™ coated forged pistons will meet your engine demands!
( 33 )
$376.99
—
$542.99
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 325 )
$250.99
—
$498.99
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$255.99
D.S.S. E Series forged pistons are fully forged and machined from a 4032 alloy material with precision-honed piston pin bores and include heavy-duty piston pins. The pistons are full-floating or press-fit compatible and use double true arc pin locks, forged oil drainbacks, double valve notches, and diamond turned piston skirts. Get high-quality pistons at a great price--try a set of D.S.S. E Series forged pistons today!
( 59 )
$409.95
—
$509.95
Speed-Pro forged pistons are made from extruded VMS-75 aluminum alloy that's forged under 3,000 tons of pressure to "near-net" shape. After that, they're machined to their final configuration. These pistons offer excellent strength and durability—and are capable of taking the punishment that's dished out on the street and in competition. They're available for a wide variety of applications, including OE replacements and all-out racing engines.
( 71 )
$335.99
—
$592.99
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 134 )
$252.99
—
$584.99
Informed decisions can pay big dividends. Put your money on the solid performance of KB Performance Claimer pistons. These pistons offer quality and high performance for the power that you need, even when you're building on a budget. Claimer pistons mix a hypereutectic alloy displaying long wear characteristics and unique thermal properties with permanent mold casting processes to produce strong but lightweight pistons for optimal racing performance. Order the size and options needed for your application.
( 27 )
$252.99
—
$379.99
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 67 )
$266.99
—
$604.99
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 61 )
$251.99
—
$563.99
Money is power, and the smart money is on KB Performance Claimer piston and ring kits. These kits offer quality and high performance for the power that you need, even when you're building on a budget. Claimer pistons mix a hypereutectic alloy displaying long wear characteristics and unique thermal properties with permanent mold casting processes to produce strong but lightweight pistons for optimal racing performance. Pistons are given an anti-friction coating and supplied with Tru-Arc lock rings so that you can run full floating or press fit. Informed decisions can pay big dividends; put your money on the solid performance of KB Performance Claimer piston and ring kits.
( 10 )
$306.99
—
$345.99
These JE Pistons Premium Race series piston rings offer unbeatable performance. They feature high-quality materials suitable for high-horsepower needs. When you need performance, JE Pistons has you covered.
( 22 )
$256.07
—
$319.99
ICON FHR Series pistons for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. ICON FHR pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ring land. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 5 )
$399.99
—
$540.99
Speed-Pro piston and ring kits include either cast, hypereutectic, or forged pistons and a set of matching moly-faced piston rings. The pistons include new wrist pins and come available in standard bores as well as oversized bores to fit your specific engine combination. Save yourself some extra money and get matching components in one package. The Speed-Pro piston and ring kits will help get your engine fired back up in no time.
( 6 )
$329.99
—
$363.99
ICON Pistons FHR (Forged Head Relief) Serie features VMS 75 alloy, true arc-style lock rings, broached pin holes, and breakthrough oil returns—all designed to be easy on your wallet! In addition, most flat-top, dish, and dome styles are available in an offset pin design, which will help to quiet those street motors. Sets with KTM after the product number will include piston rings. ICON FHR Series pistons are offered for a wide variety of specific make/model and engine applications.
( 10 )
$451.99
—
$554.99
Total Seal CS AP Advanced Profiling ring sets feature conventional top rings, conventional second rings, and standard-tension oil rings. Total Seal CS AP Advanced Profiling ring sets are ideal for street, race, mild nitrous, and mild forced induction applications.
( 12 )
$281.78
—
$543.32
JE Pistons Pro Steel piston rings utilize a high-strength, alloy-steel top ring that provides superior bore conformity. This is complemented by the outstanding seal and wear characteristics of a high-velocity, plasma-moly inlay coating. The top ring weighs under 10 g as a result of reduced ring radials and short axial heights, helping to minimize cylinder wall drag. The optional second ring's Napier hook profile design helps to improve oil control and efficiency.
( 6 )
$257.56
—
$324.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 51 )
$251.99
—
$502.99
Dynamite for your pistons! TNT piston rings from Total Seal feature the latest in hybrid ductile iron ring technology. The centrifugally spun, heat-treated ductile iron top ring is specifically designed to withstand the explosive rigors of nitrous oxide and forced induction environments. They're quick seating, easy on the cylinder walls, and available with optional PVD face coatings for further reductions in friction and increased wearability. These Total Seal TNT piston rings are available in sets with conventional, gapless top, or gapless second rings, or individually.
( 1 )
$295.51
—
$599.55
These Scat I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. Scat Pro Comp I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers, and special hollow dowels with huge 7/16 in. ARP cap screw bolts to greatly increase strength and horsepower capabilities.
( 59 )
$544.99
D.S.S. Competition Engine offers E Series forged piston and ring kits for a variety of applications, including many Chevy and Ford V8 small block engines from 1963 and up—an ideal choice for a budget performance engine build. Forged and machined from premium wear-resistant 4032 alloy, these pistons are the low-cost alternative to cast hypereutectic pistons. They're loaded with features, such as: fully CNC-machined piston tops; forged in oil drain backs; diamond turned skirts; full floating or press-fit heavy-duty wrist pins; double true arc pin retaining locks; and more. Available with flat top or dish style pistons, in a wide range of size and stroke options, the kits are sold in sets of 8. Additional details: * Ring set included * Fully machined piston crown * Lightweight design * Precision-honed pin bores * Forged side reliefs * Boost and NOS ready (mild levels)
Not Yet Reviewed
$479.95
—
$509.95
Total Seal CRG Classic race piston rings are built around Total Seal's ductile iron, plasma-moly coated conventional top rings. They have conventional cast iron second rings and 3-piece, Gold Power low-tension stainless steel oil rings. These ring sets are ideal for race applications and mild levels of nitrous or forced induction.
( 3 )
$294.63
—
$381.99
Manley performance piston rings feature a high performance, ductile-iron top ring with a plasma-moly inlay. The second rings are constructed from reverse-twist cast iron, and the oil rings are 3-piece, standard-tension rings. Manley performance rings are available in both standard and file fit sizes. Choose the set designed for your engine application.
( 5 )
$264.58
—
$443.55
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$252.99
—
$529.99
TS1 Street and Race piston rings from Total Seal feature ductile iron conventional top rings, gapless second rings, and the correct 3-piece oil rings for your application. Ensure proper sealing and cylinder pressure in your next engine with Total Seal TS1 Street and Race piston rings.
( 5 )
$268.86
—
$500.52
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
