Availability
Showing In Stock Items. Show All 23 Items.
Summit Racing™ LS rocker arms are high-quality rocker arms that have a pedestal mount, roller fulcrum style, and are made of high-quality ductile iron construction to ensure long-lasting durability and performance. They are moly coated for wear resistance and smoother low friction operation. So, if you're looking for a quality set of rocker arms for your LS motor, Summit Racing™ has the rocker arms for you!
( 2 )
$554.99
Summit Racing™ Pro LS upgraded rocker arms feature high-quality rocker bodies that utilize the factory style pedestal mount. They are made of high-grade cast steel construction to ensure long-lasting durability and performance. This design replaces the factory bearing and powdered metal trunnion and utilizes a captive bearing design and a bearing steel trunnion. These rocker arms are a perfect upgrade for higher rate springs and performance camshafts. Summit Racing™ Pro LS upgraded rocker arms come preassembled with heavy-duty trunnion kits, which saves you time and the additional cost of an installation tool. Features include: • New body casting includes thicker webbing in critical areas for increased strength • Additional oiling provisions for the bearings • Heavy-duty clips or retainers • Durable captive bearing design and bearing steel trunnion
( 25 )
$326.99
—
$328.99
On Sale
Performance-minded engine builders know there's an inherent issue with valvetrain deflection when using stock rocker arm mounting in Chevrolet Gen III-IV-cylinder heads. BTR LS shaft rocker kits are designed to significantly reduce deflection, thereby improving both performance and durability. Each kit features technology typically only found in high-end shaft rocker systems. These shaft rocker systems consist of a billet steel stand equipped with four shafts per cylinder head, fasteners and bearings. The shafts are made from genuine 52100 bearing steel. Each pair of rockers has five fasteners mounting them to the rocker stand, compared to the traditional single bolt per rocker configuration. These shaft rocker kits are ready for assembly using your existing stock rockers. (Rocker arm shafts are also available individually.)
( 15 )
$309.99
—
$469.99
$278.99
—
$422.99
On Sale
"Bolt and go" is hard to believe, and yet the tech-savvy people and operations at Scorpion offer the only direct bolt-on--the LS Race Series rocker arms. You won't have to change your valve covers. These amazing aluminum rocker arms use factory bolts and are torqued to factory specifications. They possess all of the great quality features offered on all Scorpion rocker arms, like solid steel pedestals and black oxide coated steel parts, and they are 100 percent CNC-machined. Scorpion LS Race Series rocker arms are the quietest on the market and can be installed by the garage guy with know-how. Bolt on a set of Scorpions and sting your competition with LS Race Series rocker arms.
( 11 )
$589.88
$513.20
On Sale
Add some punch to your Chevy LS1 engine—install a set of GM LS trunnion-upgraded OEM rocker arms from COMP Cams, the absolute leader in valvetrain technology! These upgraded rocker arms feature a stronger, more durable trunnion and captured bearing design to eliminate cageless needle bearing failure in stock LS rocker arms when loads are increased. Choose the COMP Cams rocker arm application (ratio) that will best fit your goals. Additional features include: * High-quality steel body * Black oxide finish for long-term durability * Increases lift capacity * Utilizes caged roller bearings * Trunnions are secured by snap rings * Meets or exceeds OEM specifications
Not Yet Reviewed
$563.95
$363.95
If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.
( 175 )
$491.99
Our lightweight, CNC-machined aluminum roller rocker arms have premium needle-bearing fulcrums for stable operation, reduced friction and wear, plus increased horsepower. These pedestal-mount rocker arms are an easy upgrade on 1999 and later LS1/LS6 engines and don't require changing valve covers. The rocker arms come with pedestals and have an anodized finish.
( 28 )
$462.99
—
$509.99
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 202 )
$260.95
—
$541.95
PRW Pro Series shaft-mount rocker arm kits are comprised of components from the finest manufacturers in the world. CNC machined billet steel pedestals, ground steel alloy rocker shafts, PRW alloy steel fasteners, and studs and bolts are included in the complete kits for a professional install. Each rocker body is relieved for extra valve spring clearance and anodized for added strength. Choose the kit designed for your vehicle.
( 1 )
$474.10
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 127 )
$335.99
PRW Pro Series billet aluminum rocker arms offer outstanding power and performance advantages for street, strip, and track applications. Laboriously made from high-strength 6061 T-6 aluminum extrusions, each piece is precision CNC-machined, and hand-finished to ensure the quality you expect from PRW. These stud-mount rockers are purposely machined to graciously allow for larger springs and retainers, with full-cage, friction-reducing needle bearings for added durability. PRW Pro Series billet aluminum rocker arms are used around the world by professional racers, engine builders, and hot rod enthusiasts. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Heat-treated steel nose rollers and shafts minimize wear between roller tip and valve stem * Rated at 750 lbs. open spring pressure * Internal oiling system for long-lasting performance * Distinctive blue anodized finish
( 13 )
$261.12
—
$370.01
On Sale
No more broken rockers! BTR rocker arms are designed to provide superior movement of inertia, compared to roller tip rockers, for max RPM. Their all-new 1.7 ratio drop-in design is perfect for cathedral port and square port (exhaust only), but will also work on the exhaust side of the L92/LS3 head. Constructed of bare steel, these BTR rocker arms are 46 percent stronger than stock Chevrolet rockers in FEA analysis--and feature an extended tip design that will allow for higher valve lift and improved valve tip durability.
( 2 )
$299.99
—
$469.99
$269.99
—
$422.99
Take your engine's performance to new heights with PRW Elite Series stainless steel full roller rocker arms, are engineered for maximum strength, speed, and precision. They are built for serious racers and performance enthusiasts who demand superior control and durability. Precision engineered with Direct Oil Feed Technology, a tight-fit nose roller axle, and E-Coated stainless steel rocker bodies, this series delivers smoother motion, increased RPM potential, and unmatched long-term reliability under extreme conditions. Features: * Rated up to 1000 lbs. open spring pressure * Direct Oil Feed Technology for enhanced lubrication and performance * 25% narrower roller reduces valve-end mass for higher RPM response * Precision-machined nose roller axle for smooth, friction-free motion * 12-Point polylocks included for secure, hassle-free installation
Not Yet Reviewed
$531.54
PRW offers Sportsman steel full roller rocker arms for a variety of applications, including select Chevy and Ford engines from 1997 and up. Designed for those who demand the best in precision, strength, and efficiency, these cutting-edge rocker arms take your engine's performance to new heights. They feature direct oil feeding, nose roller axel (which is precision-machined for a tight-fit smooth motion), and E-coated rocker bodies. This all combines to deliver superior power, smoother operation, and unmatched durability under the most demanding conditions. Order the set recommended for your vehicle. Benefits/characteristics: * Rated up to 650 lbs. open spring pressure * Direct oil feed technology * 25 percent narrower roller reduces mass over the valve for additional RPM * 30 percent stronger than OEM body * Bolts included
Not Yet Reviewed
$383.77
PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls
( 33 )
$383.77
PRW offers stainless steel rocker arms for a variety of applications, including many Chevrolet, Ford, American Motors, Oldsmobile, and Pontiac vehicles from the 1930s and up. They incorporate an exceptional design that provides plenty of clearance for large diameter springs. These rocker arms are manufactured from premium quality 17-4ph stainless steel, a superior alloy that is high in nickel and chromium. This rigid premium material provides high yield strength to help resist deflection and has extraordinary fatigue resistance. PRW stainless steel rocker arms feature full cage friction-reducing needle bearings and extra-large trunnions to spread out the load and reduce wear. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to resist the severity of racing and to minimize scrubbing. Each rocker body is hand-polished, assembled, and carefully inspected to provide customers with some of the finest quality rocker arms available to the racing and performance industry. Available as a set with poly locks or sold individually. Product highlights: * Lightweight design * PRW poly locks included * CNC-machined pushrod cups * Heat-treated Cr40 steel rollers and shafts * Manufactured from 17-4ph stainless steel * Features full complement friction-reducing needle bearings * Wide assortment of ratios to suit almost any cam profile
Not Yet Reviewed
$326.14
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 9 )
$474.10
COMP Cams's XD-A pushrods offer a game-changing method for accurately setting lash or pre-load while using non-adjustable-style rockers. These patent-pending pushrods incorporate a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. Proven to 9,000-plus rpm in solid roller LS applications, the system provides a 90 percent increase in bending stiffness for enhanced valvetrain stability. It also allows for lightening of a rocker arm system by 30-plus grams on the backside by removing the adjuster and required support area for threads and seating. The use of lighter rockers with XD-A adjustable pushrods allow higher rpm to be achieved by creating a much more dynamically stable valvetrain system. COMP Cam XD-A pushrods are designed especially for engines with low-mass rocker arms and a light valvetrain with drop-in fitment in LS engines. They can be adjusted over a range of .172 in. in .004 in. increments with shims. Choose the pushrods with the adjustment range needed for your setup.
Not Yet Reviewed
$276.95
Looking for performance? PROMAXX Performance Gold Series valve spring and retainer kits are one of the most widely used and trusted "drop-in" dual spring options. They work with both stock and aftermarket rocker arms—and no cutting or machining is needed on the stock spring pocket. These kits consist of Gold dual springs, titanium retainers, machined locks, machined spring bases, and 16 Viton® rubber seals. Go for the gold: Gold Series valve spring and retainer kits from PROMAXX Performance!
Not Yet Reviewed
$376.00
On Sale
BTR camshafts are designed for excellent performance and great drivability. Brian Tooley Racing offers a large number of camshafts and combinations to fit many applications for trucks and cars. Numerous grinds for turbo, supercharged, and naturally aspirated combinations are available for your project, all backed by years of experience, knowledge, and a passion for power.
( 14 )
$409.99
$368.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
