Filters
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 6 )
$256.99
—
$284.99
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$292.99
—
$424.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$254.99
—
$319.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 248 )
$316.99
—
$396.99
If you liked the results you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series main bearings. Built on unplated steel backings, for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. Unlike Vandervell main bearings, Clevite V-Series main-bearing sets use a single-piece thrust bearing, so you don't need separate, assembled thrust bearings. Extra-clearance variations are available to provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$254.99
—
$287.99
Clevite engine bearings have helped power every single NASCAR champion since 1948 to Victory Lane, setting the pace for quality and reliability in the most demanding of settings. Their V-Series main bearings typically have low to medium eccentricity and a hardened steel back with a high crush for better seating and retention. They also do not have flash plating on the steel back to provide better dimensional accuracy and bore contact, using a lead-indium overlay which offers better conformability than lead-tin copper overlay with slightly reduced wear resistance. For daily drivers, and racers on tracks around the country, Clevite continues to be the brand of choice for engine builders with the coated V-Series main bearings best suited to match their application.
Not Yet Reviewed
$274.99
—
$295.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$252.99
—
$263.99
Clevite's M-Series main bearings are special-purpose items. They have a nominal 0.006 in. thick babbit layer on hardened-steel backings and are intended for engines that have severe crankshaft deflections. They have enlarged chamfers and, for some applications, both the oil holes and the oil grooves are enlarged.
( 1 )
$284.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 96 )
$255.99
—
$331.99
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 6 )
$250.99
—
$308.99
Dura-Bond offers replacement cutters for their Quick Bore System. Dura-Bond has revolutionized the process of rebuilding aluminum heads with its Quick Boring System, an O.H.C. cutter system for aluminum cylinder heads that enables you to bore a complete cylinder head and install new repair bearings in less than half the time. These quality replacement cutters will help you to maintain proper performance from your Quick Bore System (sold separately). Order the cutters recommended for your engine type.
( 1 )
$460.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$254.99
—
$326.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 39 )
$297.99
—
$339.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 171 )
$261.99
King CP-Series main bearings are direct replacements for your vehicle. Stronger and more forgiving, these OEM replacement main bearings feature tri-metal construction with a copper/lead material on steel with a .001 in. copper/lead/tin overplate. These main bearings are available half-grooved or full-grooved to fill your oiling preference. Replace those worn bearings before you ruin your crank. Choose bearings that you know will fit right and provide miles of service—CP-Series main bearings from King.
Not Yet Reviewed
$375.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 13 )
$279.99
—
$304.99
King TFC-Series engine main bearings feature a special factory applied nano-composite polymer coating—with no added thickness! The Top Fuel Line represents the culmination of the innovative and goal oriented research and production from King Engine bearings House. These bearings are available for a wide range of vehicles, especially year/make and engine applications from the 1960s and '70s. Additional details: TOP FUEL BEARINGS with K-40 POLYMER COATING: This coating composition was specially designed for engines experiencing continuous metal-to-metal contact, which is characteristic of the extreme loading and conditions found in various categories of drag racing. K-40 is used for Top Fuel, Funny Car, Pro Mod and similar applications—where bearings are required to resist metal-to-metal contact and deformation. Extreme loads cause the oil film to break down, allowing contact between the bearing and crankshaft surfaces. Maintaining low friction, even during the conditions of metal-to-metal contact, is crucial to the life of any engine bearing. King TFC bearings are designed to withstand the loading generated from 10,000 hp Top Fuel engines. TFC winning attributes: * HIGH STREGTH STEEL: able to withstand extreme loads * SPECIAL DUCTILE BRONZE LINING: will not crack under significant plastic deformation caused by high power engine (10,000 hp) * EXTRA THICK BABBIT LINING: strengthened by copper, excellent conformability * K-40 POLYMER LAYER: provides excellent anti-friction and anti-seizure properties during metal-to-metal contact
Not Yet Reviewed
$281.99
—
$357.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 92 )
$276.99
—
$296.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
