Availability
Showing In Stock Items. Show All 97 Items.
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 245 )
$435.95
—
$514.95
$353.95
—
$462.95
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$464.95
—
$549.95
$417.95
—
$493.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$299.95
—
$749.95
$252.95
—
$454.95
On Sale
Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.
( 104 )
$286.95
—
$478.95
$258.25
—
$430.95
On Sale
Holley Muscle Series valve covers are a blast from the past inspired by 1970s-era GM factory L82/LT1/Z28-equipped engines. They fill your desire with the iconic finned design and retro styling cues. You can choose from four finishes to best match your small block. Order the pair recommended for your year/make and engine application. Product features include: * Cast aluminum construction and fin design create strength and rigidity to offer years of leak-free performance * Standard height * Twist-in oil fill knockout (cap included) on one cover * Recessed area to place the included adhesive-backed Holley emblem or any round emblem of your choice on the other cover * Pre-installed internal oil baffles on both covers * PCV grommets
( 32 )
$381.95
—
$449.95
$292.95
—
$388.95
On Sale
Holley harmonic balancers are offered for a variety of internally or externally balanced applications; in versions for engines requiring weighted or non-weighted balancers. All are accurately balanced and carefully machined for correct fit. Holley harmonic balancers feature clear, white, easy-to-read timing marks against a painted black background.
( 1 )
$334.95
—
$663.95
$301.45
—
$365.95
On Sale
Holley GM Gen-V LT engine swap oil pans are designed for LT engine swap installations in classic car and truck chassis' requiring more oil pan to chassis clearance around the front half of the oil pan. GM's new Gen V LT direct injected engines are starting to find their way into a large variety of vehicles. They make great power and are very durable and reliable. Unfortunately, the factory oil pans don't always fit or they hang too low for today's hot rods. The solution? Holley's GM Gen-V LT swap engine oil pans! They will provide maximum clearance to the chassis and ground, plus, they provide an OE-style fitment for durability and proper sealing. Features: * These oil pans are perfect for: 1967-1992 Camaro/Firebird, 1968-1974 Nova/Apollo/Ventura/Omega, 1978-1987 G-body, 1964-1972 A-body, and 1973-1987 Chevy/GMC Full Size Trucks * Designed to provide more oil pan to chassis clearance around front half of the oil pan * Allows for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-Body oil pan can be used * Provides OE-style fitment—OE oil filter mounting, OE oil cooler port provision, OE engine NVH suppression, OE flange gasket and sealing, proper structural rigidity, and OE bell-housing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provides maximum clearance for vehicles where the steering linkage is behind the engine cross-member * Oil cooler port provision * Cast and machined aluminum * 1/2 in. NPT port—ideal for Turbo oil return or PCV oil return * Optional hinge door baffle (available separately) * Complete kit includes: windage tray, sump baffle, OE-style pick-up tube, sump port plug, oil filter stud, billet oil passage cover, etc.
( 2 )
$516.95
—
$549.95
$464.95
—
$493.95
On Sale
Mopar's popular Gen III Hemi engines are ideal for swapping into muscle cars since they are durable, reliable, and make great power. The factory oil pans that come on these engines usually do not fit and hang too low for your swap. Holley Gen III Hemi retrofit oil pans' cast aluminum construction and integrated windage tray combined with the O-ring sealing provide an attractive leak-free solution for your engine swap. With the included pickup assembly and mounting bolts, Holley Gen III Hemi mid-sump engine swap oil pans have everything you need for installation.
( 7 )
$487.95
—
$534.95
$438.95
—
$480.95
On Sale
Holley's 2-piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies, and a Ford style overcover that hides the unsightly LS coils and messy wiring harness. This allows the full performance benefits of coil-on-cover ignition setups without the robotic styling. These coil covers also feature cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, plus dress-up hardware and rubber grommets for the coil covers. The modular LS valve covers are available in three custom finishes: natural cast, polished, and satin black. Features: * Cast aluminum 2-piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies * Retain the performance of factory coil-on-cover ignition without the unsightly styling * Coil cover features vintage Ford valve cover styling and cast-in wiring provisions * Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750 in. lift cam with stock-style rocker arms * Base features internally baffled ventilation system * No coil relocation, wire harness extensions, or custom spark plug wires required * Includes low-profile billet oil fill cap * Includes all necessary coil mounting provisions and dress-up hardware
Not Yet Reviewed
$481.95
—
$573.95
$432.95
—
$515.95
On Sale
Vehicles that endure prolonged sessions of braking, turning, and accelerating need extra protection from oil starvation. That's where Holley retrofit oil pan baffle kits for the GM LS engines come in handy. They are designed to maintain proper oil level at the oil pump pickup during vehicle accelerations, both lateral and linear. The baffle maintains the oil at the oil pump pickup preventing loss of engine oil pressure during maximum cornering in a high performance touring or road racing, as well as under hard acceleration in drag racing vehicles. The baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow towards the oil pump pickup but not away.
( 4 )
$349.95
—
$380.95
$314.95
—
$342.85
On Sale
5.0L Ford Coyote engines are popular engines being swapped into classic Ford muscle cars and trucks. Weiand Coyote swap oil pans are specifically designed for the installation of Gen 1 and 2 or Gen 3 Coyote engines into 1965-79 Ford F-Series trucks. The pans feature high-quality pressure-tight cast aluminum construction with an OE appearance and clean exterior styling. Select the correct pan for your swap. Features of Weiand Coyote swap oil pans: * Complete kit includes a hinged-door sump baffle, OE-quality pick-up tube, and mounting hardware * Maintains oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and mild on-track applications * Installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and oil windage control characteristics * Pick-up tube is based on the OE design, manufactured with smooth bends minimizing any possible flow restriction to the oil pump inlet * Bolt-in hinged-door baffle maintains oil at the pick-up, providing consistent oil pressure to the engine * Three cast-bosses, one on each side and one at the front-left, may be drilled and tapped for a hose fitting if turbocharger or breather can oil returns are required * Sump design is made for the original truck chassis front crossmember or for Crown Vic front suspension conversions
Not Yet Reviewed
$499.95
$448.95
On Sale
Holley M/T valve covers are flashbacks to 1972. Nothing was cooler than cruising in your hot rod with a Holley double pumper and M/T finned aluminum valve covers. Each Holley M/T valve cover is precision-manufactured with knockout plugs for stock PCV and oil fill installations. These covers feature polished top cover surfaces that may be used for engraving your name horizontally next to the deep heat dissipating fins. Available in your choice of black crinkle or a polished finish, each Holley M/T valve cover comes in retro packaging styled after the original. Order the pair designed for your engine application.
( 29 )
$292.95
—
$549.95
$263.65
—
$393.95
On Sale
Put your Holley pride on display with a set of attractive Vintage Series valve covers. Their die-cast aluminum construction ensures high detail, while reducing the opportunity for oil leaks and warping of the flange. Choose from among a half-dozen finishes to give your engine a clean, professional look. The vehicle-specific covers are available for every model year dating as far back as 1958.
( 33 )
$299.95
—
$449.95
$269.95
—
$403.95
On Sale
Holley Muscle Series centerbolt valve covers present a no-frills, modern style with prominent raised GM "Chevrolet and Bowtie" logos. Intended as an alternative to the existing GM ZZ6 accessories, a Holley GM Muscle Series cover is the perfect addition to your engine bay if you're searching for a subtle custom variation from the OEM options. They feature a generous internal height for exceptional valve train clearance, and include pre-installed internal baffling, polished mounting hardware, and oil fill/PCV grommets. Holley Muscle Series centerbolt valve covers feature: * Clean, modern styling with high-definition "Chevrolet and Bowtie" logo * Specifically designed for GM ZZ6 engines, but will fit all small block Chevy applications with center bolt-style cylinder heads * Diecast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks * Emissions-compliant valve covers include pre-installed internal oil baffles, as well as an oil fill plug and PCV grommet * Multiple finishes are available
( 8 )
$411.95
—
$419.95
$369.95
—
$376.95
On Sale
Steeda underdrive pulleys help you achieve more horsepower and torque—along with better gas mileage! These serpentine-style units reduce the parasitic accessory drag on your engine, slowing the speed on parts like the alternator, water pump, and crankshaft by about 25 percent. The well-built pulleys are manufactured from one-piece nodular iron, with special injection-molded rubber to limit vibrations and perform in high temperature areas. Most of Steeda's underdrive pulleys are designed for fitment in various Ford Mustang models. Order the kit tailored for your specific car, then enjoy the newfound power and fuel efficiency you've been losing with older stock components.
( 10 )
$294.95
—
$364.95
$255.99
—
$289.95
On Sale
Holley LS valve cover adapter plates offer an innovative way to add the vintage styling cues of a 1958-86 small block Chevy perimeter bolt valve cover to your modern GM LS engine. These cast aluminum adapter plates include hardware to mount three different generations of coil packs under the valve cover without the need of any coil relocation kit, and you retain all the benefits of OE-style coil-on-plug mounting. These adapter plates feature an integrated oil fill and are pre-threaded for PCV ventilation fittings.
( 4 )
$299.95
$269.95
On Sale
Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.
( 2 )
$286.95
—
$299.95
$258.25
—
$269.95
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$381.95
$343.75
On Sale
Holley Gen V LT accessory drive installation kits allow the use of high-mount LS accessory drive systems on LT engines. These kits allow you to choose the source for supplemental accessories and components that are often already on a donor engine or host vehicle. This drive system has incorporated an upgrade to the conventional looking and central located (Camaro style) LS water pump that works in conjunction with an OEM LT1 truck harmonic balancer. Holley Gen V LT accessory drive installation kits include spacers for the LS style brackets, water pump spacers, solenoid reclocking retainer ring, re-routed front harness, and all hardware. Other features: * No engine modification required * Hides temperature sensor and harness connector from site * Cost effective and proven solution * Utilizes conventional single sided belt * Easy way to add power steering with your Gen V LT swap
Not Yet Reviewed
$289.95
$260.95
On Sale
Enhance the look of your engine with a pair of Scott Drake classic aluminum valve covers for small block Ford engines. Diecast from high-quality aluminum alloy, the covers are available in more than a dozen styles to customize your ride. Finish options include polished, black, black wrinkle, and black powdercoat. These valve covers also feature a cadmium plated oil filler tube to help stop corrosion, an improved oil baffle design to accommodate high-lift cam shafts—and will work with most roller rockers. Order the model designed for your vehicle application.
( 179 )
$338.95
$305.05
On Sale
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 86 )
$280.95
—
$333.95
$252.85
—
$300.55
On Sale
Complete your EFI Hi-Ram manifold with a Holley Hi-Ram intake manifold top. These intake manifold tops, along with their matching bases, are made from cast aluminum—with either a natural or black finish. They provide a cost-effective option for your high performance applications where induction system height is not limited. Get aggressive, bold styling and performance with a Holley EFI Hi-Ram intake manifold top.
Not Yet Reviewed
$474.95
$426.95
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$399.99
—
$499.99
$349.99
—
$449.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
