Availability
On Sale
As your number-one source for high performance, it only seems right to offer you these Chevy 350 engine kits. They feature Summit Racing™ brand components, matched for optimal performance by our tech experts, so you can get the rebuild components that you need without taking the time to do all of the research. These convenient, affordable kits are available with standard or oversize pistons and standard or undersize bearings. Each kit includes: * T5 heat-treated hypereutectic pistons * Cast iron rings * Bimetal main, rod, and cam bearings * Brass freeze plugs * High-volume iron oil pump * Gaskets * Plastigage and assembly lube
( 12 )
$414.90
—
$445.90
$414.40
—
$445.40
On Sale
Peterson Fluid Systems oil filter mounts with engine oil primers allow you to use a standard drill to prime your engine easily. With their unique R4 rotor design, these small pumps can deliver 20 psi of oil pressure in as little as 10 seconds. This ensures that all your bearing surfaces are properly oiled, cutting down on engine wear. The oil filter mounts feature billet aluminum construction, AN port fittings, and tube or firewall mount. (Mount bracket is sold separately.)
( 1 )
$463.99
—
$554.99
$417.59
—
$499.49
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$402.95
—
$554.95
$260.95
—
$359.95
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
Holley modular LS Pontiac-style valve covers feature an OE height, internally-baffled base with integrated coil mounts for popular Gen I and Gen V-style LS coil bodies. The overcovers hide the unsightly LS coils and messy wiring harness—allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simulated oil fill cap which helps maintain the original Pontiac styling. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Holley's 2-piece LS Pontiac-style valve covers offer a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation! More product features and items include: * Available in various finishes * Base fits LS1, LS2, LS3, LS6, and LS7 engines with clearance for 0.750 in. lift cam with stock style rocker arms * Base features internally baffled ventilation system * Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, 2 billet simulated fill cap assemblies, hardware, and spacers for mounting both versions of LS coil bodies * Dress-up hardware and rubber grommets for the coil covers
Not Yet Reviewed
$586.95
$439.95
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$584.96
—
$608.98
$534.96
—
$558.98
On Sale
You're on your way to transforming that 350 block into a real ground-shaking 383. Finish it off with Summit Racing™ Chevy 383 engine kits and stay on budget. Summit Racing™ has done the homework and selected parts that will work together to produce the power that you want. These engine kits feature Summit Racing™ brand components, delivering high performance quality at a reasonable price. Chevy 383 kits include new hypereutectic pistons and a high-volume oil pump, as well as rings, bearings, gaskets, freeze plugs, Plastigage, and assembly lube. Make the most of those extra cubes and do it the smart way with Summit Racing™ Chevy 383 engine kits.
( 4 )
$452.90
—
$458.90
$452.40
—
$458.40
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$399.99
—
$499.99
$349.99
—
$449.99
On Sale
Are you rebuilding your engine or installing a new camshaft? These Summit Racing™ timing chain and gear set Pro Packs include a new double-roller timing chain set, a cam change gasket set, rocker arm oil deflecting clips, assembly lubricant, and Loctite RTV 598 silicone. Complete your cam change with one of these Summit Racing™ timing chain and gear set Pro Packs.
( 18 )
$329.95
$329.65
On Sale
Summit Racing™ billet race valve covers are built for maximum performance applications. Machined from a single piece of solid 6061 billet aluminum and anodized black, the covers include a threaded oil fill cap, internal baffles, turbo oil returns (which can also be used as PCV vents), a raised height to clear most shaft rocker setups, and all mounting hardware and gaskets. Avoid leaks and clearance issues with Summit™ billet race valve covers.
Not Yet Reviewed
$549.99
$499.99
On Sale
Holley Gen III Hemi timing covers are offered in two finishes for your mid-mount accessory drive system. Available for Hemi engines with or without VVT, these covers are the correct replacements for those originally supplied in your Holley complete accessory system. They will provide the perfect fit and expected performance to service your system. Choose the Gen III Hemi timing cover required for your setup.
Not Yet Reviewed
$476.95
$309.95
On Sale
If you're contemplating performing a solid axle swap (SAS) on a 1995-2004 Tacoma, a word to the wise: keep in mind that both removing and replacing the oil pan is a necessary step to avoid clearance issues. Trail-Gear has put together a replacement kit for both the 2.7 and the 3.4 Tacoma engines, with all of the associated parts that you'll need for an easy oil pan conversion while installing Trail-Gear's Tacoma SAS oil pan kits. The kits are designed to provide plenty of clearance for axle housing, steering linkage, and ram assist.
( 1 )
$517.64
$439.99
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 141 )
$597.95
—
$631.95
$387.95
—
$472.95
On Sale
Holley harmonic balancers are offered for a variety of internally or externally balanced applications; in versions for engines requiring weighted or non-weighted balancers. All are accurately balanced and carefully machined for correct fit. Holley harmonic balancers feature clear, white, easy-to-read timing marks against a painted black background.
( 1 )
$663.95
$430.95
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 9 )
$399.99
$299.99
On Sale
Mishimoto baffled oil catch cans are designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. They feature custom grooves in the catch can's inlet that turbulates the air longer and ensures that all of the oil sinks to the bottom, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions. These catch cans are machined from 100 percent billet 6061 aluminum, and accept AN fittings at the inlet, outlet, and drain area—allowing for over 27 possible configurations. For maximum fitment options, the top cog mounting setup enables the cans to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for AN return to the oil pan. Mishimoto baffled oil catch cans are washable, unlike many other cans that require you to replace your filtration system, and they're available in a variety of colors. Order the model recommended to fit your vehicle, engine, and/or transmission application.
( 34 )
$303.95
—
$509.95
$258.36
—
$433.46
On Sale
Summit Racing™ Pro diesel camshafts are available for a variety of applications, including many Chevrolet Duramax V8 engines from 2001 to 2016. The solid roller style cams are offered in different models and options, such as all low-end power performance; mid-range; or top-end gains. Explore our Pro 1, Pro 2, and Pro 3 models, then select the grind and details that best suit your truck requirements.
Not Yet Reviewed
$699.99
$499.99
On Sale
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 42 )
$294.99
—
$339.99
$265.49
—
$305.99
On Sale
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$311.99
—
$326.99
$280.79
—
$294.29
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$600.57
$565.97
On Sale
King TFC-Series engine main bearings feature a special factory applied nano-composite polymer coating—with no added thickness! The Top Fuel Line represents the culmination of the innovative and goal oriented research and production from King Engine bearings House. These bearings are available for a wide range of vehicles, especially year/make and engine applications from the 1960s and '70s. Additional details: TOP FUEL BEARINGS with K-40 POLYMER COATING: This coating composition was specially designed for engines experiencing continuous metal-to-metal contact, which is characteristic of the extreme loading and conditions found in various categories of drag racing. K-40 is used for Top Fuel, Funny Car, Pro Mod and similar applications—where bearings are required to resist metal-to-metal contact and deformation. Extreme loads cause the oil film to break down, allowing contact between the bearing and crankshaft surfaces. Maintaining low friction, even during the conditions of metal-to-metal contact, is crucial to the life of any engine bearing. King TFC bearings are designed to withstand the loading generated from 10,000 hp Top Fuel engines. TFC winning attributes: * HIGH STREGTH STEEL: able to withstand extreme loads * SPECIAL DUCTILE BRONZE LINING: will not crack under significant plastic deformation caused by high power engine (10,000 hp) * EXTRA THICK BABBIT LINING: strengthened by copper, excellent conformability * K-40 POLYMER LAYER: provides excellent anti-friction and anti-seizure properties during metal-to-metal contact
Not Yet Reviewed
$281.99
—
$357.99
$253.79
—
$322.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
