Availability
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 45 )
$2,642.99
—
$5,184.99
Replace the tired small block in your boat with ATK High Performance GM 383 Stage 1 marine long block crate engines. They are built from the ground up with off-shore performance in mind. These hand-built and balanced engines utilize Vortec power and stroker torque to produce an awesome 345 hp and 445 ft.-lbs. of twist that will get you moving on the open water. Each engine features brass freeze plugs and corrosion-resistant marine gaskets to keep the engines healthy and reliable. ATK GM 383 Stage 1 Marine long block crate engines include: * Handpicked, remanufactured blocks * Dart Iron Vortec cylinder heads * Nodular steel crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 5 )
$4,417.99
Diamond Pistons Marine Series pistons are ideal for your high-demand boats. These forged aluminum pistons are significantly stronger than the factory pistons allowing your engine to handle that extra horsepower, high-rpm operation and long hours on the water. Diamond Pistons Marine Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Moly skirt coating for friction-loss and skirt-wear protection * Oversized valve pockets for "larger than stock" valve sizes * Forged 2618 or 4032 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
Not Yet Reviewed
$2,246.98
—
$2,586.97
Power your boat like a pro with Dart Pro 1 Marine cylinder heads. Their aluminum cylinder heads are offered bare or assembled for out-of-the-box performance. Pro 1 Marine heads are cast from 355-T61 aerospace alloy with an exclusive chromate finish to inhibit corrosion and provide superior strength and integrity. These Dart cylinder heads have highly efficient chambers with race-proven features, including rolled valve angles, an improved spark plug location, extra-long intake valves, raised exhaust ports, and fast-burn chambers. Assembled heads include super-tough Inconel exhaust valves to withstand the extended running times and temperatures typical of marine usage. Top your boat block with a couple of power makers--Dart Pro 1 Marine aluminum cylinder heads.
Not Yet Reviewed
$2,650.45
Dart Pro 2 Marine aluminum cylinder heads are foundations for optimized airflow and increased power. They are cast from 355 T-61 aerospace alloy with an exclusive chromate surface finish to inhibit salt corrosion for marine use and provide superior strength and integrity for longer life. Top your boat engine with Dart Pro 2 Marine cylinder heads.
Not Yet Reviewed
$2,971.98
Want to get back on the water? Start your build with ATK High Performance GM 383 Stroker marine base long block crate engines. They'll help anyone looking to complete their build with reliable, on-water high performance. These base or Stage 1 engines produce great power throughout the entire power curve! Your ATK GM 383 Stroker marine base long block features: * Seasoned OE 4-bolt main, one-piece seal block * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Hypereutectic dished pistons with 9.1:1 compression ratio * Hydraulic roller camshaft with 210/215 Duration @0.050, 0.462 In./0.470 Ex. Lift, 114LSA * ATK aluminum cylinder heads with 70cc/195cc port volume and 2.02/1.60 in. valves * Double roller timing chain * Brass freeze plugs * Rocker arms: stamped steel 1.5 ratio * 5 qt. oil pan * Standard volume oil pump
Not Yet Reviewed
$4,798.99
Inspired by Dart's championship winning Pro Stock designs, Dart Pro 1 aluminum cylinder heads cover a wide range of applications from street cars and trucks to all-out racing. Heads designed for street performance and mild bracket racing offer excellent mid-range torque and power, and are excellent for heavier vehicles. Competition heads are ideal for maximum effort naturally aspirated, big boost forced induction, or nitrous applications. Dart Marine Pro 1 cylinder heads feature an exclusive chromate surface finish to inhibit corrosion and extend the life of the head. They are also fitted with Inconel exhaust valves to withstand the extended running time and temperatures typical of marine usage. Dart's as-cast ports flow more than many ported designs at a much more affordable price. But they also offer fully CNC-machined heads with every intake port, exhaust runner, valve bowl, and combustion chamber shaped by their 5-axis, computer controlled machining centers to produce compound curves and complex shapes that no human could duplicate with a hand grinder. Available bare or fully assembled, long-wearing bronze valve guides, screw-in studs, multi-angle intake seats with hardened, radiused exhaust seats are standard on most heads. Assemblies typically include stainless steel valves, premium springs, locks, retainers, guide plates, and seals. Many Pro 1 heads include race-proven features such as improved spark plug location, extra-long intake valves, raised exhaust ports, and fast burn chambers. They are offered an extensive variety of valve angles, intake port volumes and shapes, exhaust port locations, valve sizes, and chamber volumes.
( 10 )
$2,005.84
—
$4,257.19
Dart's Pro1 Mercury Racing cylinder heads are perfect if you need a little more power, and are true bolt-on replacements patterned on professional competition heads. The intake ports are precision-cast from C355-T61 aerospace aluminum, come available with 310cc, 325cc, or 345cc intake runners, and have the correct exhaust bolt pattern for factory manifolds. The yellow chromate surface treatment inhibits salt and corrosion for marine usage. They are available bare or assembled. Choose the right configuration for your motor and any special parts and considerations. Assembled heads also include Inconel exhaust valves to withstand extended running time and temperatures.
Not Yet Reviewed
$2,815.75
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 71 )
$2,955.99
—
$5,184.99
Dart SHP Special High Performance small block Chevy cast iron bare blocks are designed for high performance and heavy duty applications. These SPH blocks are an ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders and high performance marine enthusiasts. Key features of SHP small block Chevy bare blocks are: * Priority main oiling system * Siamese cylinder bores with extra-thick walls * Extra thick decks to ensure reliable head gasket seal * Blind head bolt holes (don't go through water jacket) * Scalloped water jacket walls for improved flow around cylinders for better cooling * Clearance for 3.75 in. stroke with steel rods * Splayed outer bolts on middle main bearing caps * Provisions for OE stock roller lifters and cams * All OE bolt holes starter, clutch ball, etc. * Uses 1981 to 1985 stock style oil pan and passenger side dipstick * Uses stocked stamped steel or plastic timing cover
( 20 )
$2,299.99
—
$3,799.99
Dart SHP Special High Performance LS Next Pro cast iron bare blocks continue the evolution of their LS Next platform with superior strength. With full skirt designs, priority oiling systems, and other excellent features, these SHP LS Next Pro blocks are the perfect upgrades for your factory LS blocks, as well as ideal starting points for drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. Dart SHP LS Next Pro cast iron bare blocks feature: * Superior strength 220 BHN cast iron * Steel 4-bolt main caps with upgraded ARP main studs * Lifter oil crossover with restrictor provision * 6-bolt per cylinder capability * 4.000 in. up to 4.185 in. bore * Factory oil filter provision * 8-counterweight machining * Full skirt design * Priority main oiling * Siamese cylinder bores * Thick decks ensure reliable head gasket seal
( 1 )
$4,699.99
Whether you are into drag racing, circle track, road racing, marine, or just running a serious piece on the street, Jesel Pro tie-bar roller lifters are built to go the distance! Manufactured to the highest standards using the strongest materials available, lifter components are machined in-house, allowing Jesel the ability to control the finish and hold critical tolerances which far exceed current industry standards. Choose the proper fit for your application. Features and benefits: * Heat-treated 8620 bodies are DLC coated to reduce friction and body wear * .842 in. up to .937 in. diameters are available covering all popular OE and aftermarket blocks * Heat-treated stainless steel tie-bars keep lifter precisely aligned through the lift cycle * Tie-bars are retained to the bodies using Jesel designed tool steel nuts * Cam rollers with precision sorted needle bearings (standard) * Pressurized oiling to the axle assembly * Heat-treated and polished tool steel roller * Offset or on-center pushrod seats available * Optional bronze bushed cam rollers available
Not Yet Reviewed
$2,125.00
Are you looking for big torque and horsepower numbers? AFR's 325cc Magnum big block Chevy line of medium-volume intake runners will provide you with exactly that. The phrase "having your cake and eating it too" would certainly be appropriate with their moderately sized intake runners producing tremendous flow figures across the entire lift range. These high-flow/high-velocity ports provide extreme versatility and fill the needs of many applications. From a max-effort high-compression 454 to a 605 c.i.d. low-rpm marine application, these aluminum cylinder heads would be a great choice. AFR Magnum heads would also be ideal in larger cubic inch Pro Street applications with their broad torque range, as well as their significant rpm and horsepower capabilities. These cylinder heads will work best with a primary operating range of 3,000-7,000 rpm (this range is an average and will vary with engine displacement as well as component selection). These 325cc heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The standard combustion chamber volume is 119cc on these AFR's 325 "as-cast" pieces. The heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,158.40
—
$4,050.90
On Sale
Quicksilver's long block assemblies are all-new (not rebuilt, remanufactured, or reconditioned) marine engines and feature improved components, technology, and built-in durability designed to withstand years of marine duty--one of the most abusive and demanding environments for any engine. The foundation of every Quicksilver long block engine is a new iron block cast to Quicksilver's specifications and designed expressly for marine duty. Thicker castings ensure quieter operation and better durability in saltwater when compared to a standard automotive block. They feature Black-X composite valves that contribute to a 42 percent reduction in valve wear compared to traditional stainless steel valves with hardened seats, while smooth-flowing cylinder heads deliver added performance. Quicksilver Value Series long blocks are cost-effective solutions when replacing an engine with a reliable fuel system and dress components that can be reused, typically when the original engine block has suffered freeze damage. Select the long block needed for your build.
Not Yet Reviewed
$5,324.99
—
$5,336.99
$4,792.49
—
$4,803.29
Don't let their size fool you—AFR Magnum 305cc "as-cast" heads with a CNC bowl blend will provide you with flow numbers that most medium-sized heads, and some larger, can only dream about. This line was designed to optimize low and mid-lift airflow, while still generating impressive peak figures. Their application should be focused on smaller cu. in. Chevy big blocks (396-502) with a primary operating range of 2,500-6,800 rpm (this range is an average and will vary with engine displacement, as well as component selection). AFR 305cc Magnum BBC heads should also be given strong consideration in larger street-driven or marine applications up to 555 c.i.d., where low-rpm power and drivability are factors. These cylinder heads would be a great choice if you're looking for big torque and strong low-rpm performance and still have good rpm capabilities. The heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.250 in. intake valves and 1.880 in. exhaust valves. Standard combustion chamber volume is 119cc. These heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,158.40
—
$4,050.90
Are you looking for big torque and horsepower numbers? AFR's 335cc Magnum big block Chevy line of medium-volume intake runners will provide you with exactly that. The phrase "having your cake and eating it too" would certainly be appropriate with their moderately sized intake runners producing tremendous flow figures across the entire lift range (AFR CNC 335 heads flow 410 cfm!). These high-flow/high-velocity ports provide extreme versatility and fill the needs of many applications. From a max-effort, high-compression 454 to a 605 c.i.d. low-rpm marine application, these aluminum cylinder heads would be a great choice. AFR Magnum heads would also be ideal in larger cubic inch Pro Street applications with their broad torque range, as well as their significant rpm and horsepower capabilities. These cylinder heads will work best with a primary operating range of 3,000-7,000 rpm (this range is an average and will vary with engine displacement, as well as component selection). The 335cc heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The standard combustion chamber volume for the fully CNC-ported 335cc is 121cc. They are available with an optional 114cc combustion chamber as well.
( 3 )
$4,344.90
—
$4,938.15
Isky hydraulic roller tappet camshaft and lifter kits are available for popular V8 applications (Chevy, Chrysler, Ford, Oldsmobile and Pontiac) from the 1960s and up. These complete assemblies consist of the hydraulic camshaft of your choice, a set of Isky "Quiet Power" hydraulic lifters, a can of rev-lube and installation instructions. You can choose from kits designed for excellent mid-range performance—or high performance bracket racing (or even off-shore marine use with inboard/outboard drive). Select the RPM range, rocker ratio, idle type, compression, and other options best suited for your vehicle.
Not Yet Reviewed
$2,119.99
For those of you that feel most confident running a steel-based valve train, look no further than the collection of Crower stainless steel shaft-mounted rocker arm systems. Every configuration has been rigorously scrutinized to offer extreme rigidity and accuracy while optimizing the moment of inertia phenomena condition. Crower engineers made ease of installation and maintenance a top priority--so you'll never waste a moment when time is critical at the track. These stainless steel shaft rocker systems are a perennial favorite of dirt late models and marine endurance competitors. Sustained high temperatures have little effect on the strength properties of stainless steel so components made from this material typically have a longer life expectancy than similar components made from aluminum. All Crower shaft mount rocker arms are available with Crower's needle bearing roller tip option. They greatly reduce friction for added horsepower and decreased valve guide and valve stem wear. The lighter tips deliver greater valve control for increased rpm and improve valve spring longevity by decreasing heat compared to traditional non-needle designs.
( 2 )
$2,375.99
—
$3,285.99
Edelbrock Victor Jr. CNC cylinder heads are a CNC-ported version of Edelbrock's Performer RPM heads. These cylinder heads feature a high velocity port design that's ideal for Super Gas, Super Comp, Hi-Po Marine, all-out street and Pro Brackets. Victor Jr. CNC cylinder heads have smaller than stock 11/32 in. valve stems to promote excellent flow and lighter valve weight.
Not Yet Reviewed
$2,176.50
World Products 8.1L engine blocks are direct replacements with all the OE fitments and accessory mounts. The 8.1L engine is no longer in production—and until now, there have been no replacements available. These engines are common in trucks, motor homes, marine, and industrial applications. Like all of World's blocks and heads, the 8.1L is American-made. New digital inspection equipment and quality verification procedures ensure dimensional accuracy—and mean you can be assured of total quality and superior performance.
Not Yet Reviewed
$3,842.02
Don't let their small size fool you—AFR Magnum fully CNC-ported 315cc aluminum cylinder heads will provide you with flow numbers that most medium sized heads, and some larger, can only dream about. This line was designed to optimize low and mid-lift airflow, while still generating impressive peak figures. Their application should be focused on smaller cu. in. Chevy big blocks (396-502) with a primary operating range of 2,500-6,800 rpm (this range is an average and will vary with engine displacement as well as component selection). AFR 315cc Magnum BBC heads should also be given strong consideration in larger street-driven or marine applications up to 555 c.i.d., where low-rpm power and drivability are factors. Extremely versatile with their incredibly strong low and mid-lift airflow figures, as well as peak numbers approaching the 400 cfm mark, the 315cc heads would be a great choice if you're looking for big torque and strong low-rpm performance and still have good rpm capabilities. They come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.250 in. intake valves and 1.880 in. exhaust valves. Standard combustion chamber volume with AFR's fully CNC-ported 315cc version comes with a 121cc chamber. These AFR heads are available with an optional 114cc combustion chamber as well.
( 1 )
$4,344.90
—
$4,938.15
On Sale
Quicksilver cylinder heads are ideal replacement components for many GM-style 4-cylinder and V8 engines in marine, circle track racing, RV, truck, and hard-to-find industrial applications. With exclusive Black-X valves, they are designed to be the most robust, durable, and toughest service cylinder heads available. Select the cylinders heads designed to fit your engine. Features and benefits: * Thicker castings * Improved combustion chamber for better burn characteristics * Premium springs and hardened seats on the intake and exhaust ports * Quicksilver exclusive Black-X valves -- Composite valves -- Stainless steel treated with a cobalt-chromium alloy and black plasma nitriding -- Contribute to a 42 percent reduction in valve wear compared to traditional stainless steel valves with hardened seats -- Longer engine life, especially in the presence of modern ethanol-blended fuels * Backed with a 1-year limited warranty
Not Yet Reviewed
$2,538.99
$2,285.09
Looking for big LS engine power at an affordable price? Summit Racing™ remanufactured 5.3L LS long block crate engines are rated at 450 HP and 420 lbs.-ft. torque! This engine will give you the performance and drivability you have been searching for at a price you can afford. It can be a performance upgrade for 99-07 Chevy trucks, or an engine swap into your project vehicle. You will save time and money by leaving the machine-work and assembly to us. Just bolt on your accessories and drop it in. These engines are machined and assembled for us by the guys at ATK, and backed with a 2-year unlimited mile warranty for peace of mind. Technical specifications: * Horsepower: 450+ * Torque: 420+ * Block: Seasoned OE LM7/5.3L iron * Bore/stroke: 3.800-3.820 in. x 3.622 in. * Year range: 1999-2007 * Displacement: 323 C.I.D. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24-tooth reluctor wheel * Connecting Rods: OE GM forged powder metal 6.093 in. * Pistons: Hypereutectic flat top * Piston rings: Moly * Compression ratio: 10:1 compression * Camshaft: Summit Racing Pro LS Roller * Camshaft specifications: Lift- 550/550, Duration @.050- 222/232 * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: #799 or #243 OE aluminum 64cc 2.00 in./1.55 in. valves * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed
( 43 )
$3,849.99
If the time has come to replace your tired old small block Chevy, then look no further than a VEGE Chevrolet 350 c.i.d. remanufactured long block crate engine. These long blocks are an excellent foundation for budget-minded builds, are a drop-in replacement for many 1987-95 GM vehicles—and can also be retrofitted into nearly any vehicle. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines create great low-end power, making them perfect for cruisers, street rods, trucks and even your daily driver. They can produce 250 horsepower and 350 ft. lbs. torque when equipped with 600CFM carburetor and a dual plane 4-barrel intake manifold. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines feature: * Remanufactured 2-bolt main cast iron engine block * Cast crankshaft * Cast connecting rods * 12.3cc Dish hypereutectic pistons * 8.5:1 Compression ratio * Cast iron cylinder heads with 76cc combustion chambers * 1.94 in. Intake valves, 1.50 in. exhaust valves * Standard small Chevy exhaust bolt pattern * Uses standard 14mm x 1.25 thread, taper seat, 0.441 in. reach spark plugs * Hydraulic flat tappet camshaft * 0.383 in. Intake lift, 0.401 in. exhaust lift * Duration at 0.050 in. lift 194 int./202 exh. * 112 degree lobe separation * Oil pan with passenger side dipstick * Steel timing cover * Steel valve covers Drop-In replacement applications: * 1990-92 Cadillac Brougham * 1987-94 Chevrolet Blazer * 1988-95 Chevrolet C1500 * 1992-95 Chevrolet C1500 Suburban * 1988-95 Chevrolet C2500 * 1992-95 Chevrolet C2500 Suburban * 1988-95 Chevrolet C3500 * 1989-89 Chevrolet Caprice * 1987-95 Chevrolet G10 * 1987-95 Chevrolet G20 * 1988-95 Chevrolet K1500 * 1992-95 Chevrolet K1500 Suburban * 1988-95 Chevrolet K2500 * 1988-95 Chevrolet K3500 * 1987-89 Chevrolet P20 * 1988-95 Chevrolet P30 * 1987-87 Chevrolet R10 * 1987-88 Chevrolet R10 Suburban * 1989-91 Chevrolet R1500 Suburban * 1987-88 Chevrolet R20 * 1987-88 Chevrolet R20 Suburban * 1989-89 Chevrolet R2500 * 1989-91 Chevrolet R2500 Suburban * 1989-91 Chevrolet R3500 * 1995-95 Chevrolet Tahoe * 1987-87 Chevrolet V10 * 1987-88 Chevrolet V10 Suburban * 1989-91 Chevrolet V1500 Suburban * 1989-91 Chevrolet V2500 Suburban * 1989-91 Chevrolet V3500 * 1989-95 GMC C1500 * 1992-95 GMC C1500 Suburban * 1989-95 GMC C2500 * 1992-95 GMC C2500 Suburban * 1989-95 GMC C3500 * 1987-93 GMC G1500 * 1987-95 GMC G2500 * 1988-95 GMC G3500 * 1987-91 GMC Jimmy * 1988-95 GMC K1500 * 1992-95 GMC K1500 Suburban * 1988-95 GMC K2500 * 1988-95 GMC K3500 * 1988-89 GMC P2500 * 1989-95 GMC P3500 * 1987-87 GMC V1500 * 1987-91 GMC V1500 Suburban * 1987-87 GMC V2500 * 1987-91 GMC V2500 Suburban * 1987-91 GMC V3500 * 1993-95 GMC Yukon
( 25 )
$2,899.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
