Availability
Showing In Stock Items. Show All 1837 Items.
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$22.61
—
$32.99
WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.
( 113 )
$22.99
—
$24.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$20.99
—
$45.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$24.99
—
$41.99
Sealed Power plasma-moly piston ring sets feature heat-resistant plasma-molybdenum facing material. Plasma-moly is a relatively soft and porous ring facing with excellent oil carrying capacity and fast conformability (break-in) to the cylinder bore surface. They are a premium part of the comprehensive line of Sealed Power engine components that provide innovative designs, use leading edge materials, and utilize ISO and QS certified manufacturing to deliver top-quality products that meet the rigorous demands of both classic and today's modern engines. Features of and benefits of Sealed Power plasma-moly piston ring sets include: * Improved bond strength of plasma-moly provides excellent resistance to flaking * Controlled porosity of the coating results in improved top ring lubrication * Variety of top ring materials * Decreased friction * High melting point of moly for very high resistance to scuffing * Exacting tolerances * Meets or exceeds OEM specifications * Recommended for street use, marine use, and for racing where file fitting is not required
( 41 )
$22.99
—
$26.99
ACDelco GM Genuine Parts engine oil sump windage trays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. These crankshaft oil deflectors are available for a variety of vehicles, including many Chevrolet and Pontiac applications. Order the replacement model recommended for your ride.
( 1 )
$39.99
—
$43.99
Melling cylinder sleeves are available for a variety of bore sizes to fit all sorts of cylinders. They are great for fixing damaged cylinders. Get your cylinder sleeves from Melling on order today!
( 59 )
$21.99
—
$53.99
ICT Billet LS valve cover bolt and seal kits deliver leak-free performance. You'll receive bolts, washers, and grommets to seal your valve covers tight.
Not Yet Reviewed
$37.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$21.99
—
$43.99
When it's time to replace or upgrade the valves in your Trick Flow® cylinder heads, don't cut corners—turn to the company that originally made them. These replacement valves are the same high quality units used in Trick Flow® assembled heads. Features include stainless steel construction, swirl polishing, hardened tips, undercut stems, and dished heads (most applications). The valves install without any modifications and are available for all Trick Flow® cylinder heads.
( 37 )
$26.99
—
$55.99
Wiseco GF-style piston ring sets have chrome plated, barrel-faced steel top rings. They're backed up by taper-faced, ductile iron second rings and 3-piece oil rings. The oil control rings have a stainless steel spacer and chrome plated rails. These are file-to-fit rings sets, so you can get exactly the end gap that you want.
( 7 )
$30.99
—
$36.99
ACDelco offers GM Genuine Parts camshaft sprockets for a wide range of cars, trucks, and vans. These engine timing OE replacement parts are machined from nickel steel to precise specifications. They're available in different diameters and tooth-counts. Stay with the parts brand your General Motors vehicle came with—to ensure the quality and performance will meet your expectations. Order the sprockets designed to fit your application.
( 1 )
$39.99
Chevrolet Performance offers intake and exhaust valves for a wide range of applications, from 1955 and up. These replacement valves are designed to increase gas flow for more power. Strengthen your valvetrain with genuine factory-recommended parts; order the size needed for your vehicle.
( 3 )
$22.99
—
$44.99
ACDelco GM Genuine Parts oil pump pickups are designed, engineered, and tested to rigorous standards and backed by General Motors. These replacement pickups are true OE parts, delivering the correct fit along with predictable performance. They're available in different styles for hundreds of applications from the 1990s and up. Maintain your GM vehicle with genuine factory parts from ACDelco.
( 5 )
$43.99
—
$54.99
You know about Brodix heads and the kind of power they can deliver, so why fool around? When it's time to install intake valves—especially if you're going to put them in Brodix cylinder heads—accept no substitutes. These genuine Brodix intake valves are available in a variety of configurations for fitment on specific vehicle and engine applications.
( 1 )
$33.99
—
$50.99
Melling mechanical flat tappet lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit, and they are affordable, too.
( 3 )
$32.99
Are you putting Brodix cylinder heads on your engine? Or, do you just need high-quality valves for a project engine you're building? Order Brodix quality exhaust valves and be done with it. They're available in several configurations to cover a variety of vehicle and engine applications.
( 3 )
$27.50
—
$52.99
Summit Racing™ Hi-Performance Cam Bearings are designed for racing and other high-performance applications. A manufacturing process that features improved materials and optional coatings for higher fatigue resistance when running higher RPM's and valve train loads makes them an ideal upgrade component for your performance or racing engine build. Summit Racing™ Hi-Performance Cam Bearings are available individually and in sets. .
Not Yet Reviewed
$29.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$37.99
—
$52.99
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 240 )
$32.95
—
$60.95
Summit Racing™ offers cam bearing sets for a wide range of applications—including many Chevrolet small block V8 engines from 1955 and up. These bearings support the camshaft and allow it to rotate so it will activate pushrods and rocker arms to open and close valves. The direct replacements are available in a variety of materials. Order the set recommended for your vehicle.
Not Yet Reviewed
$24.99
—
$45.99
Speed-Pro piston rings help to deliver the power you need and the value and quality that you deserve. Whether you're running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components. These piston rings are available for nearly two dozen engine types. Order the size recommended for your vehicle. Piston ring details: * Recommended for all racing applications (where file fitting the ring end gap will deliver maximum power) * Face of top rings are coated with the latest generation Plasma-Moly * Plasma-Moly ring face decreases friction and is highly resistant to scuffing * Ensures dependable performance and superior service life * Application-specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Not Yet Reviewed
$27.99
—
$29.99
ACDelco GM engine oil dipsticks provide a convenient way to accurately measure your oil capacity scale. These genuine OE GM parts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Stay with the parts brand your GM vehicle came with and get the quality you know and trust, choose GM OE engine components by ACDelco.
( 2 )
$27.99
—
$31.99
Trend Pushrods offers replacement H-13 Series wrist pins in a variety of sizes. These components connect the piston to the connecting rod and provide a bearing for the connecting rod to pivot upon as the piston moves. They are machined from tool steel for maximum strength.
Not Yet Reviewed
$35.00
—
$49.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
