Availability
Showing In Stock Items. Show All 27 Items.
Holley offers cost-effective solutions that solve the accessory drive challenges, including these replacement accessory drive hardware kits. They contain a quality source of supplemental hardware, from nuts to bolts, spacers to bushings, and more.
( 1 )
$39.22
Edelbrock oil fill tubes and matching push-in breathers are designed for vintage-style manifolds with a 1 1/4 in. oil breather hole.
( 25 )
$28.95
ICT Billet idler pulley relocation brackets move the idler pulley down to allow LS1 intake manifolds to be used with truck accessory brackets. Factory brackets will require modification for intake manifold clearance; trim as needed for your intake. Also requires ICT Billet belt #K060980 for 105-amp alternators and #K060988 for high-output alternators. They are made from aerospace-grade aluminum with a natural finish.
( 7 )
$29.99
Champ Pans lifter valley baffles are made from high-quality materials and are designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power. These lifter valley baffles also help to keep excess oil out of your valve covers and maintain oil pressure in the event of pushrod or rocker arm failure by keeping the lifters in their bores. Replace your worn unit with a top-quality new baffle from Champ Pans--the high performance experts.
( 1 )
$40.57
B&B Performance crankcase evacuation systems offer increased performance, improved oil control, and reduced leakage past seals and gaskets. These pan systems accomplish this by design. The strategy is to lower the pressure inside the oil pan and crankcase allowing the use of low tension oil rings. Systems are available for drag racing, circle track, and all drag/circle 4-cylinder applications. The drag racing pan evacuation systems use both intake manifold vacuum and exhaust pulses in the header collector to evacuate the crankcase; circle track versions are plumbed to the collectors only. Both kits include all necessary oil separators, check valves, and fittings. A better plan to gain performance is with B&B Performance crankcase evacuation systems.
( 4 )
$37.99
Save time and money with one of these ICT Billet supercharger hat and fuel rail hardware kits, complete with bolts to mount your supercharger hat and fuel rails. The kits do not include the mounting plate. They do feature bolts for the supercharger hat, bolts for the water manifold, bolts for MAP and ambient pressure sensors, and bolts for fuel rail mounting.
Not Yet Reviewed
$29.99
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 350 )
$50.95
Milodon lifter valley baffles prevent hot oil from splashing on the intake manifold, thus eliminating power loss. They keep surplus oil out of valve covers by eliminating oil splash from lifter bores, and maintain oil pressure (during pushrod or rocker arm failure) by keeping lifters in their bores, except with roller cams.
( 10 )
$50.95
An outstanding selection of Trick Flow® oil vapor tank components is available to help pre-clean crankcase ventilation gases before allowing them into the intake manifold. Single and dual billet aluminum separator kits include the black anodized tanks, hoses, and limiting fittings, while clamp-on breather fittings and attachments attach to the valve cover breather opening to reduce the amount of oil vapor vented from the crankcase. Get the components you need from the engine experts at Trick Flow®.
( 6 )
$28.99
Clearance
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$20.99
—
$43.99
Lokar Midnight Series flexible engine dipsticks are designed to coordinate with Midnight Series flexible transmission dipsticks. Their slim design allows for the easy installation inside of headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without a tube), depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil. Order the model recommended for your vehicle year/make and engine family.
( 110 )
$50.95
Summit Bucks
ACDelco GM Genuine Parts PCV valves are an emission control component. These valves are a GM recommended replacement for your vehicle's original part. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These GM Genuine Parts PCV valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 5 )
$28.99
For maximum low end torque without sacrificing mid or top end power Howards Cams variable duration hydraulic lifters is a great choice. These hydraulic lifters effectively lower cam duration by approximately 10 degrees, up to 3000 rpm boosting low-end torque, manifold vacuum and fuel economy while working to maintain full lift and duration at higher speeds for maximum top-end power. Howards Cams variable duration hydraulic lifters produce a mild ticking sound similar to mechanical lifters that let you know they're working to elevate your cam to its ultimate potential.
( 1 )
$36.99
No high price tags, just top-notch quality for the budget conscious builder. This huge selection of Summit Racing™ valve covers feature durable, thick steel construction and are offered in many options to help you find exactly what you want to make your vehicle's engine bay stand out. Available styles include low-profile, stock, or tall heights; center bolt or perimeter bolt mounting; several different finishes, including chrome; plain or with designs or logos, including our Summit™ logo. Choose the fit and finish you prefer.
( 331 )
$40.99
—
$43.99
Clearance
PCV valve hoses transfer excess gasses from the crankcase to the PCV valve. If these hoses become faulty, the gas will not be transferred back into the engine, and your vehicle will be less efficient, with increased emissions and poor fuel economy. Motorcraft replacement PCV valve hoses are constructed of EPDM rubber for reliable performance in your crankcase ventilation system. These hoses are recommended by Ford Motor Company—and will resist heat, oil, grease, and other underhood additives. Choose the model designed for fitment on your vehicle.
( 1 )
$30.99
—
$38.99
$29.50
—
$31.50
URO Parts PCV and crankcase breather hoses are only a part of their vast range of OE replacement fuel, intake, and breather hoses for many European makes. URO manufacturing facilities are ISO 9000 certified. Plus, URO engineers extensively test flow rates, chemical resistance, material composition, etc. to verify that all URO Parts PCV and crankcase breather hoses match the performance of factory parts—without the exorbitant OEM prices.
Not Yet Reviewed
$29.99
Summit Racing™ engine bolt kits are available in your choice of chrome, stainless, zinc, polished stainless, or polished stainless with Allen heads and includes bolts and washers for most external engine accessories.
( 66 )
$39.99
—
$45.99
Gardner-Westcott engine dress-up bolt kits add a touch of class under your hood. The hardware is offered in a variety of materials, finishes, and head styles—with your choice of automotive logos or designs etched on the fasteners. Over a hundred different kits are available; order the model recommended for your vehicle and engine application.
( 109 )
$51.99
—
$53.99
OER Authorized alternator brackets are available for your classic GM or Mopar cars and trucks. These accurate reproductions are ideal for replacing your broken or bent factory originals when restoring your engine bay. The brackets are stamped from steel and can be ordered in a black or chrome finish. Select the model recommended for fitment with your vehicle and alternator application.
Not Yet Reviewed
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
