Availability
Showing In Stock Items. Show All 43 Items.
Edelbrock spring seat cup kits provide a hardened barrier between the valve springs and heads, positively locating the base of the spring to prevent unwanted spring movement.
( 4 )
$47.95
—
$49.95
Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.
( 42 )
$46.95
—
$56.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$29.95
—
$68.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 10 )
$40.95
Don't cut corners when it's time for valves. Get genuine Edelbrock stainless steel valves. They're made from a tough, stainless steel alloy and are carefully designed to increase gas flow for more power. What's more, they have hardened stem tips for durability and are swirl-polished.
( 24 )
$37.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 29 )
$23.99
—
$37.99
Ajusa offers hydraulic lifters for a wide range of applications—including vehicles from Volkswagen, Audi, Dodge, Eagle, Citroen, Peugeot, Dacia, Lada, Nissan, Toyota, Land Rover, MG, Rover, Triumph, Acura©, Ford, Honda©, Hyundai, Isuzu, Kia, Mazda, Mercury, Subaru, Alfa Romeo, Audi, BMW, Chevy, Chrysler, Freightliner, Jaguar, Jeep, Mercedes-Benz, Ram, Mitsubishi, Plymouth, and Lincoln. The lifters are available in hydraulic flat tappet, hydraulic roller, or hydraulic lash adjuster style. These replacements are made from factory materials and specifications to ensure proper fitment and long-lasting performance. Since 1972; Ajusa has been a leading international manufacturer of gaskets, head bolt sets, lifters, and turbo components. They carry the world's largest range for European and Asian apps worldwide marketplace.
Not Yet Reviewed
$52.99
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 22 )
$23.95
—
$64.95
COMP Cams race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, COMP Cams Race valve locks will provide the reliability that you've been looking for.
( 29 )
$30.95
—
$49.95
Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.
( 59 )
$55.95
—
$59.95
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow by PAC Racing beehive valve springs allow you to drop in a more aggressive cam without machining your spring seats (most applications). PAC springs are CNC-coiled from high-tensile-strength, extra-durable Pacaloy™ chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 18 )
$21.99
—
$57.99
Sting the competition with the full-body design of Scorpion Race Series roller rocker arms. They're precision-crafted via high-tech manufacturing methods, then fully CNC-machined. These rockers offer more clearance for retainers and springs, and can easily handle .950 in. lift and 950 lbs. of open spring pressure. The surfaces are micro-polished and anodized for looks, protection, and maximum durability. Scorpion rocker arms are available in nearly 200 fitment options; order the set recommended for your application. More speed for your high performance passion! Additional features include: * Aerospace-grade 7000 Series aluminum for maximum strength and durability * Needle bearing fulcrum and roller tip * Precision-ground needle bearings * Centerless ground trunnion, ground pin, and roller * Burr-free trunnion through hole * Directed oiling * Large machined seat and thick-walled adjusting nut (polylock) * Pedestals machined from solid steel * Black oxide coated steel parts * 1.600 in. fulcrum width * Clear 1.625 in. O.D. valve springs
( 211 )
$26.41
—
$30.53
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 272 )
$20.95
—
$64.95
Have you ever tried to install a rocker stud into your cylinder head and watched it wobble as it screwed in? Don't take a risk installing bad rocker arm studs that may botch up your Eliminator or Outlaw race cylinder head installation. Just replace the bad with the new--AFR rocker arm studs that run in straight and true! These rocker arm studs are made of premium-grade chromoly steel and are heat-treated to tensile strength. Plus, stud lengths are exact to provide positive seating every time. AFR--a name you can trust!
( 2 )
$53.55
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will rpm to 8,000 if you do not have the correct springs. Use only the valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. These Dart replacement valve springs are offered in single and dual styles to meet their cam requirements.
( 4 )
$32.67
These COMP Cams Hi-Tech 210 degree pushrods were specifically designed for high-lift applications where pushrod and seat interference are problems at maximum lift. They're heat-treated to a minimum hardness of 60 on the Rockwell C scale, for the ultimate in strength. COMP Cams even gives them a black oxide finish and imprints the length and part number on them. In addition, they feature a 210 degree radius, rather than the standard 180 degree radius, so they'll work great with rocker arms that feature cup-type adjusters and applications requiring more load-bearing surface from the pushrod. If you are building a high-horsepower, high-rpm, high-lift camshaft engine, then you need to use these COMP Cams Hi-Tech 210 degree pushrods for maximum reliability.
( 7 )
$20.95
—
$35.95
Milodon rocker arm studs are made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength. With an extra-large radius base, they are more resistant to flex and will provide a more positive seating. These screw-in rocker arm studs are made for roller rocker arms.
Not Yet Reviewed
$49.95
ARP High Performance Series rocker arm studs are ideal for ET bracket racing, limited rule oval track competition, or street use. Made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength, they are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. With an extra-large radius base, they are more resistant to flex and will provide a more positive seating. These rocker arm studs are designed to be used with Perma-Loc adjusters (not for use with OEM-style, self-locking nuts).
( 223 )
$20.99
Dart Pro series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. These studs are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. With an extra-large radius base, these studs are more resistant to flex and will provide a more positive seating.
( 27 )
$29.04
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$20.95
—
$35.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$20.95
—
$28.95
Scorpion Endurance Series rocker arms offer you power that perseveres. With less weight and a lower profile these Endurance rocker arms are built with the stamina to get the job done in winning style. Scorpion specifically designed these rocker arms for endurance racing engines with better fitment and they can easily handle up to 750 lbs. of open spring pressure. Plus, they're approximately 28 grams lighter than their Race rockers! Endurance rocker arms are micro-polished to endure over a long period and are anodized for additional protection, as well as providing great aesthetics. Choose your ratio and gain the stamina to sting your competition with Scorpion Endurance Series rocker arms. Additional features include: * Aerospace-grade 7000 Series aluminum * Full body design * Precision ground need bearings * Centerless-ground fulcrum * Ground pin and roller * Burr-free trunnion through hole * Large machined seat * Solid steel pedestals * Black oxide coated steel parts
( 33 )
$31.46
—
$47.85
Heading offshore? Go with Scorpion Endurance marine rocker arms. They have the stamina to get the job done in your powerboat racing engine. These marine rockers are designed to fit under stock height valve covers with no interference and can easily handle a .950 in. lift and 950 lbs. of open spring pressure. Scorpion rocker arms are micro-polished to endure over a long period and are anodized for additional protection, as well as great aesthetics. Choose your ratio and gain the stamina to sting your competition with Scorpion Endurance marine series rocker arms. Additional features include: * Lightweight design with short polylocks * Needle bearing fulcrum and roller tip * Centerless-ground trunnion * Ground pin and roller * Burr-free trunnion through hole * Large machined seat * Solid steel pedestals * Black oxide coated steel parts * 100 percent CNC machining
( 5 )
$38.00
Milodon Street stainless valves are one-piece forged valves that are the perfect replacements for use in your street, Circle Track, or bracket racing engine. The intake valves are forged from quality HNV8 stainless steel, while the exhaust valves are forged from premium 21-4N material to withstand the extra heat and stress. The valves have hard-chromed stems and machined heads. They are designed to take a beating, with large seat margins which allows more than one regrind.
( 19 )
$24.95
—
$26.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
