Availability
Showing In Stock Items. Show All 39 Items.
On Sale
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 80 )
$22.99
—
$53.99
$20.69
—
$48.59
On Sale
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$22.99
—
$48.99
$20.69
—
$44.09
On Sale
King SV-Series rod bearings provide movement with minimal power loss. Connecting rod bearings provide rotating motion of the crank pin within the connecting rod, which transmits cycling loads applied to the piston, and King SV-Series will provide this function well to handle your extreme load engines. These King SV-Series connecting rod bearings are copper-based and lead-free, offering great wear resistance, as well as load capacity.
( 3 )
$23.99
—
$47.99
$21.59
—
$43.19
On Sale
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 27 )
$23.99
—
$47.99
$21.59
—
$43.19
On Sale
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$22.99
—
$47.99
$20.69
—
$43.19
On Sale
Dress up the front of your engine with one of Mr. Gasket's chrome timing covers. They add the finishing touch under your hood and go great with your other chrome accessories.
( 3 )
$44.06
$28.64
On Sale
King CP-Series rod bearings are premium OEM replacement bearings designed from copper-lead on steel with a .001 in. copper-lead tin over-plate. These quality OEM rod bearings are temperature-resistant with a high-load capacity to provide dependable engine performance. From quick repairs to full engine rebuilds, you can count on King Engine Bearings.
( 3 )
$40.99
—
$46.99
$36.89
—
$42.29
On Sale
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 34 )
$24.99
—
$59.99
$22.49
—
$53.99
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 84 )
$31.48
—
$59.75
$20.46
—
$32.86
On Sale
King MC-Series engine main bearings are available for a wide range of vehicles, including models from Chevrolet, GMC, Ford, Cadillac, Hummer, Isuzu, Pontiac, and Saab. These stock replacements are machined from bi-metal silicon aluminum and sold in sets of 5 or 6, depending on your application. Main bearings hold the crankshaft in place and allow it to rotate within the engine block.
Not Yet Reviewed
$53.60
$48.24
On Sale
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$29.99
—
$46.99
$26.99
—
$42.29
On Sale
Need some good-looking pulleys for your street ride? You can't go wrong with Summit Racing™ crankshaft pulleys. These pulleys help to increase horsepower by reducing accessory drag.
( 210 )
$49.99
$44.99
On Sale
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$37.99
—
$46.99
$34.19
—
$42.29
On Sale
Racing Automotive Group offers power steering pump mounting brackets for vehicle-specific applications, including power steering pump deluxe block mounts designed to provide proper installation of the GM Type II style power steering pump to most SBC applications. The mounting brackets are crafted from quality aluminum with CNC-machined surfaces and are anodized for added durability and looks. Mount your pump properly and securely with power steering pump mounting brackets from Racing Automotive Group.
( 2 )
$44.99
$40.49
On Sale
Racing Automotive Group power steering pulleys are available in V-belt and serpentine options. Both feature lightweight aluminum construction and a black anodized finish. They are the perfect-fit replacements for your Racing Automotive Group power steering pump.
( 1 )
$49.99
$44.99
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 42 )
$71.99
—
$73.79
$39.59
—
$40.58
On Sale
These oil filter adapters from Mr. Gasket mount a spin-on oil filter. Some adapters contain a filter bypass valve.
( 26 )
$49.95
$32.47
On Sale
Mr. Gasket alternator brackets are designed to mount the alternator in several positions depending on your application. These brackets are made from heavy gauge steel to prevent flex, then highly polished and chrome plated for lasting beauty. They are available in several styles depending on your application needs.
( 20 )
$44.08
$24.24
On Sale
These bolts are made of a Grade 8 alloy and are heat-treated for extra strength. They feature a high hex head to prevent socket slippage and an extra-thick washer to allow for a more accurate, uniform torque.
( 7 )
$31.48
$20.46
On Sale
Machined from 6061–T6 billet aluminum, these breathers have a great appearance. These billet aluminum breathers are designed with performance, longevity, and ease of maintenance in mind. Simple function meets great looks with these Earl's Performance breathers.
Not Yet Reviewed
$53.25
$29.29
On Sale
Need bearings? See the specialists at King. Their CA-Series rod bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. When it comes to bearings, there is only one King Engine Bearings.
( 4 )
$43.99
$39.59
On Sale
For high load and performance applications, King SM-Series main bearings are the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. SM-Series crankshaft main bearings feature a traditional steel-backing, aluminum bonding layer, and the aluminum bearing alloy. They are available for a wide variety of vehicle and engine applications.
Not Yet Reviewed
$45.99
$41.39
On Sale
QuickTime offers bellhousing accessories, including these dowel pins, to help you to complete your project. They're made from quality material and are designed to correct the improper register bore alignment of bellhousing to your engine crankshaft center line.
( 4 )
$58.95
—
$83.35
$32.42
—
$45.84
On Sale
Mr. Gasket alternator pulleys are manufactured from quality aluminum or chrome plated steel for strength and durability. These pulleys are available in several styles to suit your automotive needs.
( 9 )
$39.40
$21.67
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
