Availability
Howards Cams double roller timing sets are hand-matched for quality and reliability. These 3-piece timing sets feature a premium double roller chain for extended life with cast iron cam sprockets. The 3-keyway crank sprockets offer a +4, 0, -4 cam adjustment.
( 10 )
$44.99
—
$53.99
Howards Cams Performance Series C1010 pushrods are manufactured from .060 in. wall C1010 low-carbon steel material. They provide over 20 percent more column strength than OEM pushrods. Their advanced design eliminates ball breakage. They are heat-treated for use with guideplates and are designed for up to 500 lbs. of valve spring pressure.
( 57 )
$46.99
—
$52.99
Howards Cams machined steel valve locks are precision-machined. They feature a wider angle to better distribute valve spring loads over the retainer than typical locks.
( 2 )
$44.99
—
$56.99
Howards Cams forged steel valve locks are stronger and more accurate than machined steel locks. They're consistent, durable, and American-made. Who could ask for more?
( 21 )
$24.99
Help to eliminate engine failures caused by misassembled or broken pin retainers. Now you can make sure that your rods and pistons remain connected with these high-quality steel Howards Cams Spirolox wrist pin retainers.
( 2 )
$26.99
—
$29.99
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 4 )
$29.99
—
$42.99
Howards Cams and Racing Components offers camshaft thrust washer bearings for a variety of applications, including many Chevrolet and Ford engines from the 1950s and up. These replacements act as a bearing surface for components to rotate, transmitting and absorbing excess force to reduce friction and wear so that the components can move smoothly. They're made from factory materials and specifications to ensure proper fit and performance. Order the bearings recommended for your vehicle.
( 1 )
$23.99
—
$24.99
Howards Cams advance and retard cam bushings offer an easy way to advance or retard your cam timing. These offset bushings come in four offset bushings and one zero degree bushing to return your timing back to stock. These bushings are precision-manufactured to offer the precise timing of your cam.
( 4 )
$21.99
—
$23.99
Today's cams have more aggressive lobes. That's why increasing the oil supply to these lobes is critical. Howards Cams uses a precision "E.D.M." laser to burn a .021 in. hole in the center of the face of their direct lube extreme-duty mechanical lifters. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 28 )
$26.99
—
$34.99
Stamped from alloy steel and heat-treated for superior wear resistance, these Howards Cams heat-treated valve locks outperform OE-style keepers. They're available in a choice of sizes to suit your needs.
( 1 )
$23.99
—
$52.99
These Extreme Black Severe Application valves by Howards Cams are engineered for high-rpm and high-horsepower applications. They feature a gloss black nitride finish and are perfect for high temperatures (they run cooler, which improves valve life), nitrous, turbo, and supercharger applications. These valves will give naturally aspirated motors a much greater cylinder flow for good horsepower gains. These valves start off as a one-piece forged high-temperature, high-nickel, stainless steel alloy. They're CNC-finished to strict tolerances, making them the choice for the most demanding race classes. Their black nitride micro-hardness is higher than the stainless steel base material. No process can match it for surface hardness! The surface finish is smoother than with chromed stems, having less friction between the stem and the guide. The black nitride reduces power loss due to there being less valve-guide friction. Their nitride finish is not a coating--it's a process whereby it actually becomes part of the steel, making them ideal for the most demanding applications.
Not Yet Reviewed
$21.99
—
$22.99
These Extreme Application valves from Howards Cams are one-piece stainless steel valves developed for applications requiring excellent reliability in a race environment. They're ideal for both oval track and drag racing applications with big lifts and high spring pressures. Made from fully machined 21-4N material, they feature hardened tips and hard chrome undercut stems.
Not Yet Reviewed
$21.99
Howards Cams performance hydraulic lifters are 100 percent Rockwell-tested. They are designed for maximum performance, while offering precision oil control. These lifters can be used as OE replacements, as well as in high performance racing applications.
( 26 )
$21.99
The unique full body design of these Howards Cams billet aluminum rocker arms offers less flex and will withstand 800-plus lbs. of spring pressure at over .800 in. lift. These rockers are 100 percent CNC-machined and are designed for more retainer and spring clearance than most other brands. They feature needle-bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers, and thick-walled adjusting nuts.
( 44 )
$34.99
—
$52.99
Add some punch to your Chevy LS with these Howards Cams LS Series direct bolt-on roller rockers. These roller rockers are easy replacements for your stock LS rockers and feature plenty of advancements that help you make more power and get better throttle response. Howards designed these roller rockers to be direct bolt-on pieces, so there is no need to change pushrods, guideplates, rocker studs, or valve covers, and your engine bay can keep that sleeper, bone stock look. These rocker arms are constructed from aluminum and feature needle-bearing fulcrums and roller tips to decrease friction and increase performance. Howards Cams offers these LS Series bolt-on roller rockers in either stock ratio or a high-lift, 1.80 ratio, so you can choose which one best fits your goals.
( 3 )
$52.99
—
$54.99
Howards Cams direct lube hydraulic flat tappet lifters use a precision minor flat ground on the side of lifter body to supply oil to the cam lobe/lifter interface. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 8 )
$34.99
If you're running big horsepower, then you may need extra support for your front and rear main caps. Stabilize and strengthen your OEM-style main caps for big power with Howards Cams main cap support straps. These steel straps will help to counter the problems of bottom-end stress and flex management.
Not Yet Reviewed
$29.99
Sam Cooke and The Pretenders both scored huge hits singing about the "chain gang." Howards Cams replacement timing chains are a preferred choice for the crucial connection between the crankshaft and camshaft. And if you want to avoid potentially thousands in repair bills, it's good to be familiar with your own chain, gang! They're responsible for operating the inlet and exhaust valve gears at the exact moment during the piston's stroke cycle. When your timing chain shows warning signs of failure, quickly turn to Howards Cams for a replacement before the problem snowballs.
Not Yet Reviewed
$36.99
Howards Cams swedged end pushrods are engineered for maximum strength and durability. Produced from seamless 4130 chromoly aircraft tubing, each tube is through-hardened to a depth of .010 in. to .015 in. These pushrods are mirror-polished to eliminate the possibility of stress fractures and are finished in black oxide. Strong but light, they are well suited for roller applications. These pushrods are packed in a unique protective storage case.
( 70 )
$26.99
—
$27.99
These Ultra Lite lifters have all of the features of the original Howard Cams Direct Lube lifters with less weight--only 73 grams. These lifters have precision laser-cut holes to allow for a constant supply of oil to the cam lobe. This leads to higher valve spring pressures, more aggressive profiles, and reduced lobe wear. Howards Cams Ultra Lite Direct Lube mechanical lifters are what you need for today's cams.
Not Yet Reviewed
$35.99
Howards Cams guideplates reduce the unwanted sideways motion of the pushrod under load. This keeps the rocker arm stabilized, making the valve operation much smoother and more efficient. They are made from heat-treated chromoly steel to reduce wear.
( 1 )
$20.99
Howards Cams Max Effort hydraulic lifters were specifically designed for higher revving applications. They are perfect for race applications which require a hydraulic lifter or high performance street applications that need an extra edge. These lifters can show a noticeable increase of power from 5,000 rpm and up.
( 8 )
$20.99
—
$39.99
Howards Cams' Pro-Alloy is a specially developed low-stress, high-endurance material. Years of development, experience, and testing have gone into creating these Pro-Alloy mechanical roller valve springs. They have a low fatigue rate compared to most other roller springs on the market. These springs exceed H-11 Vasco-Jet specifications and are cycle-tested to 12 million cycles with no breakage.
( 1 )
$20.99
—
$39.99
Howards Cams valve spring shims are critical for setting up proper valve spring height and pressures. These high-quality, heat-treated valve spring shims are designed to handle the immense pressures of today's racing valve springs.
( 46 )
$21.99
—
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
