Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
163 Results Found For "rod"
Showing In Stock Items. Show All 266 Items.
BoostLine Connecting Rods
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,099.99
—
$1,424.99
Callies Compstar Xtreme Connecting Rods
All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.
Not Yet Reviewed
$1,008.00
Scat Pro Sport H-Beam Connecting Rods
These H-beam connecting rods are the strongest Scat connecting rods available. These Scat H-beam connecting rods are perfect for supercharged and nitrous applications. These rods incorporate a special doweled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications.
( 42 )
$1,004.99
Howards Cams Ultimate Duty Forged Billet Connecting Rods
Howards Cams Ultimate Duty forged billet connecting rods start with certified high-nickel 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are specially heat-treated using a multi-phase process to produce the ultimate in strength and reliability. Then these Ultimate Duty rods are fully stress-relieved and shot-peened to ensure that no stress risers remain. Howards Cams Ultimate Duty Forged billet connecting rods are profiled for long stroke applications and weight savings. The rod caps are double-ribbed for added strength and the rod cap alignment sleeves will keep the bearing caps precisely aligned. The rods are bronze bushed for floating pins and use 7/16 in. ARP 2000 cap screw fasteners to secure the caps.
Not Yet Reviewed
$1,139.99
Manley Pro Series I-Beam Connecting Rods
Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.
Not Yet Reviewed
$1,028.90
Manley Pro Series I-Beam Turbo Tuff Connecting Rods
Manley Pro Series I-Beam Turbo Tuff connecting rods are assembled from high-quality 4340 forged steel. Every rod is fully machined to the highest standards, and the Turbo Tuff design combines the appropriate weight and rugged strength for ultimate horsepower utilization. Each rod is shot-peened after machining and individually magnafluxed. These connecting rods feature 7/16 in. ARP 2000 cap screws with 12-point heads for outstanding 200,000 psi tensile strength.
Not Yet Reviewed
$1,028.88
—
$1,319.86
Summit Racing™ Pro LS Piston and Rod Kits
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,470.97
—
$1,499.97
Ford Performance Parts Hot Rod Camshafts
Ford Performance Parts engineers seem to eat, sleep, and breathe one thing: Blue Oval performance! Their selection of camshafts covers a variety of specific applications—from mildly modified street rods, to full-out drag race cars. These hot rod camshafts result in an engine with considerably more power, while retaining the function and advantages of the computer system. Ford Performance Parts designs dual-pattern cams for either low-to-mid rpm torque or mid-to-high rpm horsepower. Choose from among the options offered for duration, valve lift, and style—including hydraulic, solid, or hydraulic roller lifter. (Refer to Notes above for additional Hot Rod cam specs.)
( 11 )
$1,048.99
Hot Rods Crankshafts
Are you looking to replace a broken or worn-out crankshaft? Hot Rods crankshafts are sold with or without Hot Rods connecting rods and wrist pin bearings. These crankshafts are factory assembled and trued to OEM specifications. They avoid the additional machine work and extra parts typically required for long-stroke engines. Stroker crankshafts use stock pistons. Heavy-duty crankshafts utilize their heavy-duty connecting rods. Bolt in and go with these Hot Rods crankshafts!
Not Yet Reviewed
$1,018.35
—
$1,386.00
Hot Rods Complete Bottom End Rebuild Kits
When it's time to do a rebuild, Hot Rods complete bottom end rebuild kits are less expensive and longer lasting than OEM. These kits have all that you need to get back on track and are easy to put together. Each kit contains a crankshaft, main bearing/seals, and a complete gasket set. Water pump seals are not included. Great performance parts from Hot Rods will have you going, going, strong!
( 2 )
$1,014.01
—
$1,357.41
Edelbrock Rollin' Thunder Hydraulic Roller Cam, Lifter, and Pushrod Kits
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,034.95
Summit Racing™ Forged Crankshafts
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$1,019.99
—
$1,194.99
Eagle Street Performance Rotating Assemblies with Silv-O-Lite Claimer Pistons
Eagle street performance rotating assemblies offer the perfect balance of strength, performance, reliability, and affordability. They include a cast steel crankshaft, Eagle "SIR" I-beam connecting rods, Silv-O-Lite claimer pistons, Perfect Circle rings, and Performance Street bearings. The kits are only available balanced. Eagle street performance rotating assemblies are the perfect choice for engines up to 500 hp. Order the model designed for your year, make, and engine application.
( 25 )
$1,205.99
—
$1,440.99
Eagle Street and Strip Rotating Assemblies
Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 87 )
$1,187.99
—
$1,320.99
Scat Engine Rotating Assemblies
Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.
( 133 )
$1,067.50
—
$1,436.99
Scat Forged Standard Weight Crankshafts
Scat forged standard weight crankshafts are designed for street or race engines with substantially increased horsepower. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance. Scat forged standard weight crankshafts are available in dozens of sizes and configurations for fitment on vehicles spanning seven decades.
( 26 )
$1,006.99
—
$1,431.99
Summit Racing™ Chevy 350 Engine Kit Pro Packs
These Summit Racing™ Chevy 350 engine kit Pro Packs give you virtually everything you need to assemble your Chevy 350. Features include: * Your choice of forged, hypereutectic, cast, or no pistons * Your choice of Summit Racing™ Stage I, Stage II, or no connecting rods * Available with or without Summit Racing™ Engine Shop cast, 2-piece, rear main seal crankshaft * Sealed power piston rings in your choice of standard, .020, .030, .040, or .060 * Rod and main bearings available in your choice of standard, .010, .020, or .030 * Sealed Power cam bearings * High-volume oil pump assembly with stock pickup welded to the pump * Summit Racing™ True Roller timing chain * Sealants, assembly lube, Plastigage, rod bolt boots, and freeze plugs
( 1 )
$1,073.82
—
$1,299.82
Eagle Forged 4340 Steel Crankshafts
Eagle forged 4340 steel crankshafts are great for high performance applications. They feature non-twist forging, undergo a multi-stage heat-treatment process, and are stress-relieved and shot-peened. These cranks are X-rayed, magnafluxed, and sonic-tested, so you know you're getting a top-quality piece. Each crankshaft has chamfered oil holes for improved oiling, a .125 in. radius on rod and main journals for increased strength, and the journals are precision-ground and micro-polished to less than 5 R.A. A target bob weight of +/- 2 percent greatly reduces balancing time. Many options are available; order the model recommended for your year/make and engine application.
( 54 )
$1,007.99
—
$1,244.99
Ford Performance Parts Crankshafts
Are you looking for a replacement crankshaft for your Ford engine? We have what you're looking for--Ford Performance Parts crankshafts. Their offerings include a variety of forged steel production and all-out racing crankshafts. Depending on application, features may include: * Forged steel construction ready for installation * Lightening holes * Rounded counterweight leading edges, tapered trailing edges * Nitrided and polished rod and main journals * Some require custom pistons, rods and balancing * Damper bolt holes counter bored to strengthen crank snout for supercharged applications
( 2 )
$1,245.99
JE Pistons 427/428 FE Inverted Dome Top Pistons
JE Pistons 427/428 FE inverted dome top pistons are specially designed for aftermarket blocks and heads and are for use with the 427 or the 428 crank aftermarket 6.700 in. rod. Be sure that the factory block is sonic-checked for 4.280 in. and 4.310 in. bores. These pistons use 1/16, 1/16, 3/16 rings. The compression ratios are figured for 10.150 block height. Larger bore sizes are available as customs; please contact the manufacturer for details.
Not Yet Reviewed
$1,099.99
JE Pistons Big Block Inverted Dome Top Pistons
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications, and their performance has been proven in victory lane time and time again. JE Pistons big block inverted dome top pistons are forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications, and they are designed specifically for each engine and use application to provide optimized performance durability. They feature JE Pistons' proprietary Forged Side Relief (FSR) forging design to minimize friction and power loss with reduced skirt width and save additional weight with a shorter wrist pin. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. rings (not included). JE big block inverted dome top pistons are available in different size specs, and can be ordered individually or in larger sets.
( 1 )
$1,024.99
JE Pistons 350/400 18 Degree Flat Top Pistons
JE Pistons 350/400 18 degree flat top pistons are compatible with angle milled heads and feature a race-proven, low-friction skirt design. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC-machined grooves accept 1/16, 1/16, 3/16 rings. These pistons utilize dedicated left and right hand forgings.
Not Yet Reviewed
$1,024.99
JE Pistons Ultralite Gas Ported Pistons
Rated at 400 hp, JE Pistons Ultralite gas ported pistons feature a contoured bottom band and a 2.400 in. length pin for maximum weight savings. Precision CNC-machined .043, .043, 3.0mm backcut ring grooves make these pistons the number-one choice for late model engine builders.
Not Yet Reviewed
$1,099.99
Mahle PowerPak Plus Piston and Ring Kits
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 5 )
$1,014.97
—
$1,023.96
