Availability
Showing In Stock Items. Show All 29 Items.
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$1,020.00
—
$1,196.00
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
—
$1,599.99
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.
( 23 )
$1,525.00
—
$1,590.00
Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.
( 3 )
$1,611.50
—
$1,639.50
Innovators West camshaft belt drive systems feature an aluminum machined cover with billet machined finish, anodized precision-machined pulleys, and top-quality Super Torque belts. All models include an adjustable idler pulley eccentric for maintaining proper belt tension, and camshaft timing is externally adjustable via the 2-piece top pulley with a 10-degree range. Cam thrust is controlled with Torrington needle bearings.
Not Yet Reviewed
$1,172.90
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,175.36
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
Without a doubt, Stef's Competition Eliminator dry sump drag race oil pans offer the maximum achievable horsepower possible through oil pan design. Obtaining and maintaining the level of superiority is only possible by "out of the box" thinking. Balancing exterior restraints, pan area, scavenge capabilities, and required windage screen area are all dictated by chassis, engine displacement, and the RPM range of the given combination. Stef's commitment to cutting-edge design is possible due to close working relationships with top engine builders across the country. Stef's engineers spend countless hours of R&D to provide the best, most cost-effective oil pan for your engine. By incorporating proprietary PTFE uni-directional screen design, proven baffling, and pickup location, Stef's can deliver unparalleled scavenging to produce maximum horsepower. The oil pans are available in different sizes and configurations for Ford small and big block, as well as Chevy small block applications.
Not Yet Reviewed
$1,042.99
S&S Cycle 98 in. big bore kits are a fantastic upgrade if your Harley® is just a bit tired. The thicker and beefier cylinders mean that the engine will run cooler and you'll love the forged pistons that come with the kits. These are the largest bores that can be fit in your stock engine case. The cylinder and piston kits make going to the max bore size easy. There is no machining required and stock engine height is maintained. These kits come with nearly everything needed to get the most out of the added cu. in. to your stock engine. You won't believe how much power these kits produce! Features and specifications: * Kit yields excellent results with stock cylinder heads * Easy installation—no need to bore or split existing cases, just swap the cylinders * Available in a choice of either black or silver powdercoat finish with polished fins * Increased fin area for better heat dissipation * Valve pocket recessed in S&S pistons are enlarged for oversize valves and higher lift cams
Not Yet Reviewed
$1,187.06
Peterson Fluid Systems oil tanks are the leader in tank technology. They're manufactured using aircraft-quality components—and internal baffling provides excellent deaeration of the scavenge oil, while maintaining a tall column of oil over the pickup. These oil tanks disassemble easily, and the tank tops can rotate in relation to the bottoms for ease in fitting placement. The units are available in different capacities, with one or two inlets, and male or female threads. (Heater bungs are sold separately.)
Not Yet Reviewed
$1,123.99
Corsa Performance C8 Corvette carbon fiber see-through trunk panels offer a blend of aesthetics and functionality, satisfying the desires of Corvette enthusiasts who crave both performance and visual appeal. Crafted from multi-layer carbon fiber, these trunk panels boast exceptional strength, durability, and a lightweight design, ensuring a seamless integration with the vehicle. What sets them apart is their unique see-through feature. The trunk panels incorporate a polycarbonate transparent window, strategically positioned to provide a clear view of the air intake system. Corvette owners can now admire the intricate details of their high performance air intake, while onlookers marvel at the breathtaking visual spectacle when the hood is opened at car shows to allow better viewing of the engine compartment. This exclusive feature allows the beauty of engineering to shine through. Additional product details: * Striking aesthetics made from 100 percent twill weave carbon fiber construction * Twill weave carbon fiber construction perfectly complements CORSA Performance C8 Corvette Intakes and most C8 carbon fiber accessories * Direct replacement bolt-on installation allows for a quick and seamless install with basic tools in under 2 hours * Maintains stock trunk volume * Features generously sized see-through window to showcase air intake components * Polycarbonate window provides exceptional strength on long-lasting durability * Fits C8 Stingray and C8 Z06 models * Engineered for exceptional strength made from multi-layer carbon fiber construction * Includes reflective heat shielding designed to protect sensitive components * Includes installation instructions and all necessary hardware
Not Yet Reviewed
$1,328.99
On Sale
Quicksilver Circle Track engines are designed to deliver torque and reliability, and they offer parts and components to keep your engine winning races and championships. Quicksilver Circle Track valve springs ensure valves close properly and at the right time, maintaining proper engine performance. These valve spring kits include retainers and locks.
Not Yet Reviewed
$1,383.99
—
$1,618.99
$1,245.59
—
$1,457.09
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 26 )
$1,526.99
—
$1,615.99
The S&S Cycle 80 in. stock bore cylinder kits for a Harley-Davidson® offers the benefit of maintaining the original engine characteristics while providing a reliable and readily available replacement option. Unlike "big bore" kits which enlarge the cylinder diameter to increase engine displacement and horsepower, a stock bore kit simply replaces worn cylinders with new ones of the same size. These stock bore cylinder kits are ideal for situations where you need to rebuild the engine without significantly altering its power delivery or overall performance, while still achieving a quality repair. If your Harley® engine needs a rebuild due to wear and tear, the S&S Cycle 80 in. stock bore cylinder kits are a good choice to restore the engine to its original functionality. Select the S&S Cycle big bore kit specifically designed for your HD® model and year.
Not Yet Reviewed
$1,121.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
