Availability
Showing In Stock Items. Show All 51 Items.
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,099.99
—
$1,399.99
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,465.97
—
$1,500.97
Trick Flow® takes the guesswork out of choosing the right cams and valvetrain upgrades for your Ford 4.6L/5.4L 2V modular engine with these Track Max® hydraulic roller camshafts and valve spring upgrade kits. Kit number TFS-K51802001 is perfect for naturally aspirated street engines operating in the 1,500-5,000 rpm range. Kit number TFS-K51802002 has an 1,800-6,500 rpm operating range and is ideal for mild street/strip engines with power adders using a maximum of 5-6 psi of boost. Kit number TFS-K51802003 delivers strong mid-range to top-end power (up to 6,500 rpm) in extreme duty street and naturally aspirated race engines. Kit number TFS-K51802004 is Trick Flow's highest-performing modular cam kit. It is recommended for maximum duty race engines with power adders and boost pressures of 15-plus psi that operate in excess of 6,500 rpm. The kits come complete with new cams and valve springs plus chromoly retainers, valve locks, seals, 12mm bolts and washers, and installation instructions. PCM tuning is recommended for maximum performance.
( 4 )
$1,205.99
—
$1,206.99
Trick Flow® Super 23® 215 cylinder heads give a huge performance boost to race-ready small block Chevy engines. Based on the proven Super 23® head design, the heads feature large, 215cc intake runners for more airflow in the mid and upper RPM range. Fast As Cast® ports deliver near-CNC-ported flow and performance for about the same price as regular cast heads—that means more power for less. Other features include angled spark plugs, raised valve cover rails, and extra-thick decks and walls for custom porting jobs. You can get Super 23® 215 heads with two valve spring packages for different camshaft types and power levels. The standard 453 lb. valve springs are perfect for most hydraulic roller cams. For more aggressive solid roller cam profiles, choose the optional 550 lb. valve springs for proper control at high RPMs. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,054.99
All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.
Not Yet Reviewed
$1,008.00
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$1,399.99
—
$1,524.99
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
Not Yet Reviewed
$1,054.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,054.95
—
$1,144.95
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$1,279.94
FLOTEK introduces the Jailbird 390cc CNC big block Chevy cylinder heads. With CNC porting to offer superior performance, the Jailbird 390 will deliver for larger cubic inch engines of 565-640, allowing aggressive cam profiles to make maximum power. Touting an impressive 467 cfm at .900 lift with professional bowl blending and a competition 6-angle valve job to release its full potential, this is the right head for you! Also offered as CNC without bowl blending, the Jailbird 390 produces 436 cfm at .700 lift with 4.625 in. bore fixture and 426 cfm on 4.50 in. bore fixture. Either way, you can't go wrong with the FLOTEK Jailbird 390—a perfect choice for Power Header, Nitrous Super Charge, Jacks, and Boosts. Models are available assembled or bare for a variety of engine applications. NOTE: This item is not sold as a pair; this is a single cylinder head.
Not Yet Reviewed
$1,224.00
—
$1,349.00
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$1,574.95
Diamond Pistons Toyota 2JZGTE Series pistons are ideal for either the street or the drag strip. These 2618 aluminum pistons are significantly lighter than the factory pistons and superior in strength, allowing your engine to handle that extra horsepower. The 2618 alloy is excellent for boosted engines such as the Toyota 2JZGTE, especially when increasing boost. Diamond Pistons Toyota 2JZGTE Series piston feature: * 3-D milling on piston crowns for "ready to install" finish * Offset pins for quiet operation * Side gas ports for better ring seal * Ratios figured for 87mm x 0.040 in. head gasket * Moly skirt coating for friction-loss and skirt-wear protection * Top ring down dimension 0.300 in. 1.338cd to 0.280 in. 1.180cd * Ratios figured for 0.040 in. head gasket at 8.937 in. deck height. * Premium 1.0mm x 1.2mm x 2.8mm ring package included * Over-sized valve pockets for "larger than stock" valve sizes * Valve pocket depth 0.245 in. intake and 0.230 in. exhaust
Not Yet Reviewed
$1,114.98
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,395.86
JE Pistons sport compact pistons are specifically engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Their dome/dish requires no deburring or preparation and features smooth-flowing radii for excellent flame travel. A pin fitting, wire locks, and rings are included.
Not Yet Reviewed
$1,099.99
—
$1,524.99
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$1,409.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,604.95
JE Ultra Series pistons combine all of the best, most desirable piston features, such as thermal barrier crown coating, lateral gas ports, thick-wall wrist pins, and a revolutionary new forging technology for the ultimate in strength. They are ready for massive power and boost right out of the box. Features of the JE Ultra Series pistons: * Grain flow optimized 2618 forging * Lateral gas ports improve ring seal * Ceramic crown coating—thermal barrier blocks combustion heat for durability and better exhaust scavenging characteristics * Perfect Skirt Coating—protects skirts, reduces friction, and eliminates cold-start piston slap and false knock on computer-controlled engines * Accumulator grooves reduce ring flutter at high rpm * Double broach pin oiling * Upgraded 9310 pins and locks—thicker, premium material wrist pins boosts strength * Carbon steel nitride rings
( 2 )
$1,124.99
—
$1,674.99
Diamond Pistons Big Block 24/26 Degree Street/Strip Dish Series pistons are available for a variety of applications, including many Chevrolet V-8 engines from 1965-90. Forged from aluminum with single valve relief, these dish-style pistons are offered in different bore, stroke, and rod length sizes—along with several other options. Order individually or in a set of 8. Additional details: * 1,200 hp rated * Forced pin oilers from the oil ring * Pin fitted * 3-D pockets * Designed for mild boost applications * Pins, locks and support rails (if required) included
Not Yet Reviewed
$1,366.97
—
$1,502.94
Diamond Pistons Big Block 24/26 Degree Street/Strip Flat Top Series pistons are available for a variety of applications, including many Chevrolet V-8 engines from 1965-90. Forged from aluminum with single valve relief, these flat top-style pistons are offered in different bore, stroke, and rod length sizes—along with several other options. Order individually or in a set of 8. Additional details: * 1,200 hp rated * Forced pin oilers from the oil ring * Pin fitted * 3-D pockets * Designed for mild boost applications * Pins, locks and support rails (if required) included
Not Yet Reviewed
$1,338.98
—
$1,542.99
Inspired by Dart's championship winning Pro Stock designs, Dart Pro 1 aluminum cylinder heads cover a wide range of applications from street cars and trucks to all-out racing. Heads designed for street performance and mild bracket racing offer excellent mid-range torque and power, and are excellent for heavier vehicles. Competition heads are ideal for maximum effort naturally aspirated, big boost forced induction, or nitrous applications. Dart Marine Pro 1 cylinder heads feature an exclusive chromate surface finish to inhibit corrosion and extend the life of the head. They are also fitted with Inconel exhaust valves to withstand the extended running time and temperatures typical of marine usage. Dart's as-cast ports flow more than many ported designs at a much more affordable price. But they also offer fully CNC-machined heads with every intake port, exhaust runner, valve bowl, and combustion chamber shaped by their 5-axis, computer controlled machining centers to produce compound curves and complex shapes that no human could duplicate with a hand grinder. Available bare or fully assembled, long-wearing bronze valve guides, screw-in studs, multi-angle intake seats with hardened, radiused exhaust seats are standard on most heads. Assemblies typically include stainless steel valves, premium springs, locks, retainers, guide plates, and seals. Many Pro 1 heads include race-proven features such as improved spark plug location, extra-long intake valves, raised exhaust ports, and fast burn chambers. They are offered an extensive variety of valve angles, intake port volumes and shapes, exhaust port locations, valve sizes, and chamber volumes.
( 10 )
$1,558.34
Do you have a boosted, high-heat, high-horsepower engine? Manley offers custom race valves for your high performance engine. These Race Series Gen II custom valves are manufactured from XH-426 (exhaust) and NK-842 (intake) materials with hard tips and hardened grooves. They are tailored to length, groove position, head diameter, margin, and other specifications that you request when ordering. So, whether you're building an engine or are a serious racer, Manley is committed to seeing that you're there at the finish.
Not Yet Reviewed
$1,516.01
S&S Cycle 131 in. big bore kits are aimed at the Milwaukee Eight platform for 2017 and newer big twins—and open up a whole new level of performance for these engines. When paired with an S&S 4.625 in. stroker flywheel (sold separately), engine will be a true 131cubic inches. S&S builds their big bore kits and cranks to much tighter tolerances and with higher quality materials than the factory parts. If you're the proud owner of a Harley-Davidson® Milwaukee Eight big twin and have been waiting for just the thing to boost your M8's power—the wait is over! The S&S Cycle piston/cylinder kits will be a solid platform for massive power! Features and benefits: * Huge displacement increase means huge power increase * Bolt-on kit works with stock crankcases * 4 1/4 in. bore cylinders with a new 11:1 forged piston design * Original engine serial numbers are retained * Powdercoat finish match factory finish, giving the bike a "sleeper" advantage * Includes .045 in. multi-layered steel head gaskets * Retains stock engine height * Includes 131 in. Cam Cover Badge * Available with or without highlighted fins Note: This kit must be used with S&S Cycle stroker flywheels to achieve 131 in. displacement (P/N: 320-0605, 320-0620).
Not Yet Reviewed
$1,403.96
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series piston and ring kits increase your horsepower potential without killing the budget. Forged and machined with your choice of premium aircraft quality 4032 or 2618 alloy, these kits are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$1,054.95
—
$1,604.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$1,379.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
