Availability
Showing In Stock Items. Show All 52 Items.
LS Classic Series big block Chevy style valve covers are designed to give the appearance of a big block Chevy while fitting the LS family of engines. Like all our cast aluminum valve covers, they accept the OEM rubber seals (not included) and bolt directly to the cylinder head. With no extra adapter required, there is less chance of leakage and the covers are only 2 in. tall. The valve covers include a billet aluminum filler cap on one cover for easy oil filling, and come with all the necessary mounting hardware, including factory look load spreaders. They also have a ported PCV fitting/vacuum port and oil splash baffle in one cover. The castings are designed to be thick enough for drilling and tapping for fittings. Covers are available with a natural cast finish, chrome plated, or painted Chevrolet orange and include vintage Chevrolet Tonawanda factory stickers. Order the LS valve cover in your preference of finish.
Not Yet Reviewed
$1,178.95
Billet Specialties smooth modular valve covers offer a clean high-tech style to your modern LS engine. They feature hidden coils and wire harness, as well as a hidden oil filler cap, creating a smooth appearance. Finished with stainless steel ARP 12-point fasteners that match their other engine accessories, your LS engine will be the center of attention. Billet Specialties smooth modular valve covers are available polished or black anodized.
Not Yet Reviewed
$1,438.95
Moroso billet aluminum valve covers are CNC-machined from a billet aluminum bar to make them lightweight without sacrificing strength. Their airtight sealing allows the engine to pull greater vacuum for improved ring seal and power. The covers are available plain or with the Moroso logo, natural or black anodized—and mount with either a centerbolt or perimeter bolts. Order the pair designed for fitment with your vehicle and engine application.
( 2 )
$1,010.99
—
$1,441.99
LS Classic Series 409 Chevy style valve covers are designed to give the appearance of an early 1960's 348 or 409 Chevy, while fitting the LS family of engines. Like all LS Classic cast aluminum valve covers, they accept the OEM rubber seals (not included) and bolt directly to the cylinder head. With no extra adapter required, there is less chance of leakage and the covers are only 2.750 in. tall. The covers come with all the necessary mounting hardware, including factory look load spreaders, and have a ported PCV fitting/vacuum port and oil splash baffle in one cover. The castings are designed to be thick enough for drilling and tapping for fittings. Covers are available with a natural cast finish, chrome plated, painted Chevrolet orange or 409 champagne, all with vintage 409 Turbo-Fire factory stickers. The covers have no provision for oil fillers and can be used with LS Classic Series valley plate with an oil fill tube. Order the valve cover in the finish you prefer.
( 2 )
$1,178.95
Manley Pro Series crankshafts can make your short block bulletproof. They feature forged 4340 construction and undergo a multi-step heat-treatment process and are then nitrided for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed. Manley Pro Series crankshafts have micro-polished large .125 in. radius journals, gun-drilled mains, and lightened rod journals for weight reduction. The counterweights are fully profiled and they are designed for internal balancing.
( 9 )
$1,106.39
Billet Specialties LS Modular valve covers offer a unique solution for hiding your LS coil packs. The valve covers are a 2-piece design that bolts together to make one cover. The base features mounts for the ignition coils, a hidden oil fill, and a 1/4 in. NPT provision for breathers or PCV in the rear of the cover. The top piece bolts to the base with polished ARP fasteners, perfectly covering the coil packs for a seamless look. Holes are provided in the side of the covers for the spark plug wires. These covers are machined from a solid piece of aluminum and are available in a variety of finishes and top styles (ribbed, logos, etc.). LS Modular valve covers are ignition coil-specific to accommodate multiple styles of coil packs. Order the model designed for fitment with your vehicle and engine application.
( 1 )
$1,569.95
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$1,124.50
All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.
Not Yet Reviewed
$1,008.00
PROMAXX Performance goes one up with their Vortec 185cc iron cylinder heads. Popular with street/strip enthusiasts and Circle Track racers, PROMAXX designed these heads to work well on 350-383 applications. They're available bare or assembled; both feature screw-in studs and large diameter spring pockets. In addition, they both accept centerbolt and perimeter bolt valve covers—and are drilled for Vortec and carbureted intake applications. Greater performance at the right price!
( 14 )
$1,022.00
Manley titanium valves feature forged one-piece construction with grain flow, not a head welded to a stem. These jewel-like valves are machined in state-of-the-art CNC turning centers and valve stem grinders to exacting tolerances. Manley utilizes the finest titanium alloys for both the intakes and exhausts, providing the best balance of mechanical properties, hardness, ductility, and fatigue strength at the given temperatures. All Manley titanium valves must pass their rigorous final inspection process, and strict quality control enables them to deliver parts within tight tolerance. Custom valves can be delivered within a very reasonable turnaround time. Seat coatings are also available on certain shelf stock part numbers, as well as on custom valves.
( 3 )
$1,158.62
—
$1,465.29
RaceTec pistons are the highest quality, precision manufactured options available made from forged or billet 2618 aluminum alloy. Utilizing the latest in CAD software and modern CNC machining centers, it is extremely durable and perfect for your high-horsepower application. RaceTec's in-house design and dyno-proven forgings ensure the strongest and lightest piston for your requirements. They offer a long list of sizes and styles. Choose the proper fit for your build. Features for most RaceTec pistons: * CNC Precision used in every manufacturing operation * Valve pockets machined for oversized valves and high lift cams * Critically machined ring grooves * Top ring land gas distribution grooves to enhance performance and improve ring seal * Wrist pins, pin fit, wire locks, broached double pin oilers, and accumulator groove are included * Diamond tooling used throughout production, including ring grooves and skirts
Not Yet Reviewed
$1,053.00
Inspired by Dart's championship winning Pro Stock designs, Dart Pro 1 aluminum cylinder heads cover a wide range of applications from street cars and trucks to all-out racing. Heads designed for street performance and mild bracket racing offer excellent mid-range torque and power, and are excellent for heavier vehicles. Competition heads are ideal for maximum effort naturally aspirated, big boost forced induction, or nitrous applications. Dart Marine Pro 1 cylinder heads feature an exclusive chromate surface finish to inhibit corrosion and extend the life of the head. They are also fitted with Inconel exhaust valves to withstand the extended running time and temperatures typical of marine usage. Dart's as-cast ports flow more than many ported designs at a much more affordable price. But they also offer fully CNC-machined heads with every intake port, exhaust runner, valve bowl, and combustion chamber shaped by their 5-axis, computer controlled machining centers to produce compound curves and complex shapes that no human could duplicate with a hand grinder. Available bare or fully assembled, long-wearing bronze valve guides, screw-in studs, multi-angle intake seats with hardened, radiused exhaust seats are standard on most heads. Assemblies typically include stainless steel valves, premium springs, locks, retainers, guide plates, and seals. Many Pro 1 heads include race-proven features such as improved spark plug location, extra-long intake valves, raised exhaust ports, and fast burn chambers. They are offered an extensive variety of valve angles, intake port volumes and shapes, exhaust port locations, valve sizes, and chamber volumes.
( 10 )
$1,558.34
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$1,583.95
—
$1,649.95
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,239.50
—
$1,558.50
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,079.50
—
$1,251.50
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,580.95
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
—
$1,599.99
Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.
( 4 )
$1,069.73
These Edelbrock Performer LT1 cylinder heads are designed for the 1992-97 LT1 engines. They produce approximately 24 hp more than factory-stock LT1 heads, and raise peak power levels by 500 rpm. They work with stock or aftermarket self-aligning roller rocker arms. These Edelbrock Performer LT1 aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 1 )
$1,087.50
Welcome to a new class of high performance cylinder heads--BluePrint Muscle Series! These aluminum heads are assembled with the perfect match of components for outstanding, trouble-free performance. Plus, they give you more power behind the wheel and in your wallet! These all-cast heads are designed for hydraulic flat tappet and hydraulic roller cam engines with hefty intake runners, stainless steel valves, Viton® seals, and dual springs. BluePrint Engines stand in front of the class, offering both performance and cost-conscious enthusiasts a powerful alternative--Muscle Series cylinder heads.
( 86 )
$1,149.00
—
$1,399.00
Eagle forged 4340 steel crankshafts are great for high performance applications. They feature non-twist forging, undergo a multi-stage heat-treatment process, and are stress-relieved and shot-peened. These cranks are X-rayed, magnafluxed, and sonic-tested, so you know you're getting a top-quality piece. Each crankshaft has chamfered oil holes for improved oiling, a .125 in. radius on rod and main journals for increased strength, and the journals are precision-ground and micro-polished to less than 5 R.A. A target bob weight of +/- 2 percent greatly reduces balancing time. Many options are available; order the model recommended for your year/make and engine application.
( 52 )
$1,034.99
—
$1,144.99
Transform your LS1 into a powerhouse! Trick Flow® GenX® 220 cylinder heads for GM 5.7L LS1 engines are a great value in performance. The cathedral port heads incorporate features of Trick Flow® fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as their competition ported heads. The special Fast As Cast® runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5 degree valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings and sold individually.
Not Yet Reviewed
$1,099.99
—
$1,149.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
